30653

Fire Alarm Box Pedestal Description The Fire Alarm Box pedestal is designed primarily to support fire alarm boxes using underground cable routes. However, in locations where poles are not available, such as intersections, etc., this pedestal can be readily adapted to accept connections from overhead cable lines. The following is a brief description of the PC-1 style. PC-1 Use this style to support a fire alarm box only. This style has a metal top shelf with an upright section of the same size and shape as the fire alarm box. Accessories Box Indicating Lights Fire Alarm Box Pedestal The PC-1 pedestal is arranged so that lighting condulets, each with red lens and guard Model No. 47375, may be mounted over each fire alarm box. A template is provided to arrange for the entrance of cables and to position the anchor bolts. Sub-Plates Use sub-plates for mounting inside the pedestal compartment upon which wire terminals and other devices are mounted. For the PC-1 pedestal, use the standard sub-plates drilled and tapped. PC-1 Pedestal wih Front Panel PC-1 pedestal with Fire Alarm Box in Place Removed Exposing Termnal Compartment Ordering Information Pedestal and Accessories Part Number Description 26308 PC-1 Pedestal, for fire alarm style box only (includes sub-plate, template and anchor bolts) 47375G Box indicating light 40067 1/2” Nipple used with 47375 42210 Sub-plate, standard, drilled and tapped 42192 Template GAMEWELL-FCI Specifications are for information only, are not intended for installation purposes, and are subject to change without notice. No responsibility is assumed by Gamewell-FCI for their use. ©2007 Honeywell International Inc. All rights reserved. www.gamewell-fci.com DS-530 Rev. A1 page 1 of 1 12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118