1N5062

1N5059 THRU 1N5062 GLASS PASSIVATED JUNCTION RECTIFIER Reverse Voltage - 200 to 800 Volts D TE * DO-204AP Forward Current - 1. 0 Ampere FEATURES ♦ High temperature metallurgically bonded construction ♦ 1.0 Ampere operation at TA=75°C with no thermal runaway ♦ Typical IR less than 0.1µA ♦ Hermetically sealed package ♦ Glass passivated cavity-free junction ♦ Capable of meeting environmental standards of MIL-S-19500 ♦ High temperature soldering guaranteed: 350°C/10 seconds 0.375” (9.5mm) lead length, 5 lbs. (2.3kg) tension TE A P N 0.034 (0.86) 0.028 (0.71) DIA. 1.0 (25.4) MIN. 0.240 (6.1) MAX. 0.150 (3.8) 0.100 (2.5) DIA. 1.0 (25.4) MIN. MECHANICAL DATA Case:JEDEC DO-204AP solid glass body Terminals: Solder plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Weight: 0.02 ounce, 0.56 gram Dimensions in inches and (millimeters) *Brazed-lead assembly is covered by Patent No. 3,930,306 MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. SYMBOLS 1N5059 1N5060 1N5061 1N5062 UNITS * Maximum repetitive peak reverse voltage Maximum RMS voltage * Maximum DC blocking voltage * Maximum average forward rectified current 0.375” (9.5mm) lead length at TA=75°C * Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) * Maximum instantaneous forward voltage at 1.0A * Maximum full Load reverse current, full cycle average 0.375” (9.5mm) TA=25°C lead length at TA=75°C * Maximum DC reverse current TA=25°C at rated DC blocking voltage TA=175°C Typical reverse recovery time (NOTE 1) Typical junction capacitance (NOTE 2) Typical thermal resistance (NOTE 3) * Operating junction and storage temperature range VRRM VRMS VDC I(AV) 200 140 200 400 280 400 1.0 600 420 600 800 560 800 Volts Volts Volts Amp IFSM VF IR(AV) 150 IR trr CJ RΘJA TJ, TSTG 50.0 1.2 5.0 100 5.0 300 1.5 15.0 55.0 -65 to +175 200 Amps Volts µA µA µs pF °C/W °C NOTES: (1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, lrr=0.25A (2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts (3) Thermal resistance from junction to ambient at 0.375” (9.5mm) lead length P.C.B. mounted *JEDEC registered values 4/98 RATINGS AND CHARACTERISTIC CURVES 1N5059 THRU 1N5062 FIG. 1 - FORWARD CURRENT DERATING CURVE FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 1.0 PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD RECTIFIED CURRENT, AMPERES 60HZ RESISTIVE INDUCTIVE LOAD 0.375" (9.5mm) LEAD LENGTH 50 TJ=TJ max. 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 0.8 40 0.6 30 0.4 20 0.2 10 0 0 25 50 75 100 125 150 175 0 1 10 NUMBER OF CYCLES AT 60 HZ 100 AMBIENT TEMPERATURE, °C FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG. 4 - TYPICAL REVERSE CHARACTERISTICS 10 INSTANTANEOUS REVERSE CURRENT, MICROAMPERES 10 INSTANTANEOUS FORWARD CURRENT, AMPERES TJ=125°C 1 TJ=150°C PULSE WIDTH=300µs 1% DUTY CYCLE 1 TJ=75°C TJ=25°C 0.1 0.1 TJ=25°C 0.01 0 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE, % 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 INSTANTANEOUS FORWARD VOLTAGE, VOLTS FIG. 6 - MAXIMUM NON-REPETITIVE PEAK PULSE REVERSE AVALANCHE POWER DISSIPATION FIG. 5 - TYPICAL JUNCTION CAPACITANCE 30 JUNCTION CAPACITANCE, pF 10 PEAK PULSE REVERSE AVALANCHE POWER, WATTS TJ=25°C f =1.0 MHz Vsig=50mVp-p 1,000 100 1 1 10 REVERSE VOLTAGE, VOLTS 100 10 10 100 1,000 10,000 td, PULSE DURATION, MICROSECONDS