EDF1AS

EDF1AS THRU EDF1DS MINIATURE GLASS PASSIVATED FAST EFFICIENT SURFACE MOUNT BRIDGE RECTIFIER Reverse Voltage - 50 to 200 Volts Case Style DFS 0.205 (5.2) 0.195 (5.0) Forward Current - 1.0 Ampere FEATURES 0.047 (1.20) 0.040 (1.02) 0.404 (10.3) 0.386 (9.80) 0.335 (8.51) 0.320 (8.13) 45o 0.255 (6.5) 0.245 (6.2) ♦ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ♦ This series is UL listed under Recognized Component Index, file number E54214 ♦ Glass passivated chip junctions ♦ High surge overload rating50 amperes peak ♦ Ideal for printed circuit boards ♦ Superfast recovery times for high efficiency ♦ High temperature soldering guaranteed: 260°C/10 seconds at 5 lbs (2.3kg) tension 0.013 (0.330) 0.130 (3.3) 0.009 (0.241) 0.120 (3.05) MECHANICAL DATA 0.060 (1.524) 0.040 (1.016) 0.013 (0.330) 0.003 (0.076) Dimensions in inches and (millimeters) Case: Molded plastic body over passivated junctions Terminals: Plated leads solderable per MIL-STD-750, Method 2026 Polarity: Polarity symbols marked on body Mounting Position: Any Weight: 0.04 ounce, 1.0 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. SYMBOLS EDF1AS EDF1BS EDF1CS EDF1DS UNITS Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward output rectified current at TA=40°C (NOTE 2) Peak forward surge current single half sine-wave superimposed on rated load (JEDEC Method) TJ=150°C Rating for fusing (t < 8.3ms) Maximum instantaneous forward voltage drop per leg at 1.0A Maximum DC reverse current at rated DC blocking voltage Maximum reverse recovery time (NOTE 1) Typical thermal resistance per leg (NOTE 2) Operating junction and storage temperature range NOTES: (1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A (2) Units mounted on P.C.B. with 0.51 x 0.51” (13 x 13mm) copper pads VRRM VRMS VDC I(AV) IFSM I2t VF TA=25°C TA=125°C IR trr RΘJA RΘJL TJ, TSTG 50 35 50 100 70 100 1.0 50.0 10.0 1.05 5.0 1.0 50.0 38.0 12.0 150 106 150 200 140 200 Volts Volts Volts Amp Amps A2sec Volts µA mA ns °C/W °C -55 to +150 4/98 RATINGS AND CHARACTERISTICS CURVES EDF1AS THRU EDF1DS FIG. 1 - DERATING CURVES OUTPUT RECTIFIED CURRENT AVERAGE FORWARD OUTPUT CURRENT, AMPERES PEAK FORWARD SURGE CURRENT, AMPERES FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 1.0 60 50 40 30 20 1.0 CYCLE SINGLE SINE-WAVE (JEDEC Method) TJ=150°C IPK/IAV=π RESISTIVE OR INDUCTIVE LOAD 0.75 0.51 x 0.51” (13 x 13mm) COPPER PADS 0.5 CAPACITIVE LOADS Ipk / IAV=5.0 Ipk / IAV=10 Ipk / IAV=20 0.25 10 0 1 10 NUMBER OF CYCLES AT 60 Hz 100 0 20 40 60 80 100 120 140 160 AMBIENT TEMPERATURE, °C FIG. 3 - TYPICAL FORWARD CHARACTERISTICS PER LEG FIG. 4 - TYPICAL REVERSE LEAKAGE CHARACTERISTICS PER LEG 1,000 10 INSTANTANEOUS REVERSE LEAKAGE CURRENT, MICROAMPERES INSTANTANEOUS FORWARD CURRENT, AMPERES 100 TJ=125°C 1 TJ=25°C PULSE WIDTH=300µs 1% DUTY CYCLE 10 0.1 1 TJ=25°C 0.01 0.4 0.6 0.8 1.0 1.2 1.4 0.1 INSTANTANEOUS FORWARD VOLTAGE, VOLTS 0 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE, % FIG. 5 - TYPICAL JUNCTION CAPACITANCE PER LEG 30 JUNCTION CAPACITANCE, pF 25 20 15 10 5.0 0 0.1 TJ=25°C f=1.0 MHZ Vsig=50mVp-p 1 10 100 200 REVERSE VOLTAGE, VOLTS