GP15A THRU GP15M
GLASS PASSIVATED JUNCTION RECTIFIER
Reverse Voltage - 50 to 1000 Volts
* D
DO-204AC
0.034 (0.86) 1.0 (25.4) MIN. 0.028 (0.71) DIA.
Forward Current - 1.5 Amperes
FEATURES
♦ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ♦ High temperature metallurgically bonded construction ♦ Glass passivated cavity-free junction ♦ Capable of meeting environmental standards of MIL-S-19500 ♦ 1.5 Ampere operation at TA=55°C with no thermal runaway ♦ Typical IR less than 0.1µA ♦ High temperature soldering guaranteed: 350°C/10 seconds 0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension
P A T
E
N
T
E
0.300 (7.6) 0.230 (5.8)
0.140 (3.6) 0.104 (2.6) DIA. 1.0 (25.4) MIN.
MECHANICAL DATA
Dimensions in inches and (millimeters)
*Glass-plastic encapsulation technique is covered by
Patent No. 3,996,602 and brazed-lead assembly by Patent No. 3,930,306
®
Case: JEDEC DO-204AC molded plastic over glass body Terminals: Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.015 ounce, 0.4 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
SYMBOLS
GP 15A
GP 15B
GP 15D
GP 15G
GP 15J
GP 15K
GP 15M
UNITS
Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current 0.375" (9.5mm) lead length at TA=55°C Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum instantaneous forward voltage at 1.5A Maximum full load reverse current, full cycle average 0.375" (9.5mm) lead length atTA=55°C Maximum reverse current at rated DC blocking voltage Typical reverse recovery time (NOTE 1) Typical junction capacitance (NOTE 2) Typical thermal resistance (NOTE 3) Operating junction and storage temperature range TA= 25°C TA=150°C
VRRM VRMS VDC I(AV)
50 35 50
100 70 100
200 140 200
400 280 400 1.5
600 420 600
800 560 800
1000 700 1000
Volts Volts Volts Amps
IFSM VF IR(AV) IR trr CJ RΘJA RΘJL TJ, TSTG
50.0 1.1 100.0 5.0 200.0 2.0 15.0 45.0 20.0 -65 to +175
Amps Volts µA µA µs pF °C/W °C
NOTES: (1) Reverse recovery conditions: IF=0.5A, IR=1.0A, Irr=0.25A (2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts (3) Thermal resistance from junction to ambient and from junction to lead at 0.375" (9.5mm) lead length, P.C.B. mounted
4/98
RATINGS AND CHARACTERISTIC CURVES GP15A THRU GP15M
FIG. 1 - FORWARD CURRENT DERATING CURVE AVERAGE FORWARD RECTIFIED CURRENT, AMPERES
1.5 1.25 1.0 0.75 0.5 0.25
0.375"(9.5mm) LEAD LENGTH
60 HZ RESISTIVE OR INDUCTIVE LOAD
FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT
50
PEAK FORWARD SURGE CURRENT, AMPERES
TJ=TJ max. 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method)
40 30
20 10
0 0
25
50
75
100
125 150 175
AMBIENT TEMPERATURE, °C
0
1
10
NUMBER OF CYCLES AT 60 HZ
100
FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS
10
FIG. 4 - TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS FORWARD CURRENT, AMPERES
10
INSTANTANEOUS REVERSE CURRENT, MICROAMPERES
TJ=150°C PULSE WIDTH=300µs 1% DUTY CYCLE TJ=125°C
1
1
TJ=75°C
TJ=25°C
0.1
0.1
TJ=25°C
0.01 0.4
0.01
0.6
0.8
1.0
1.2
1.4
1.6
0
20
40
60
80
100
INSTANTANEOUS FORWARD VOLTAGE, VOLTS
PERCENT OF RATED PEAK REVERSE VOLTAGE, %
FIG. 5 - TYPICAL JUNCTION CAPACITANCE
FIG. 6 - TYPICAL TRANSIENT THERMAL IMPEDANCE TRANSIENT THERMAL IMPEDANCE (°C/W)
30
TJ=25°C f=1.0 MHZ Vsig=50mVp-p
100
JUNCTION CAPACITANCE, pF
10
10
1
0.1 0.01
0.1
1
10
100
1
t, PULSE DURATION, sec
1
10
REVERSE VOLTAGE, VOLTS
100
很抱歉,暂时无法提供与“GP15K”相匹配的价格&库存,您可以联系我们找货
免费人工找货