MBR1045

MBR1035 THRU MBR1060 SCHOTTKY RECTIFIER Reverse Voltage - 35 to 60 Volts TO-220AC 0.185 (4.70) 0.415 (10.54) MAX. 0.370 (9.40) 0.360 (9.14) 0.154 (3.91) DIA. 0.148 (3.74) 0.055 (1.39) 0.045 (1.14) 0.175 (4.44) Forward Current - 10.0 Amperes FEATURES ♦ Plastic package has Underwriters Laboratory Flammability Classifications 94V-0 ♦ Metal silicon junction, majority carrier conduction ♦ Low power loss, high efficiency ♦ High current capability, low forward voltage drop ♦ High surge capability ♦ For use in low voltage, high frequency inverters, free wheeling, and polarity protection applications ♦ Guardring for overvoltage protection ♦ High temperature soldering guaranteed: 250°C/10 seconds, 0.25" (6.35mm) from case 0.113 (2.87) 0.103 (2.62) 0.145 (3.68) 0.135 (3.43) 0.560 (14.22) 0.530 (13.46) 0.410 (10.41) 0.390 (9.91) PIN 1 0.160 (4.06) 0.140 (3.56) 0.560 (14.22) 0.530 (13.46) 2 0.635 (16.13) 0.625 (15.87) 0.350 (8.89) 0.330 (8.38) 1.148 (29.16) 1.118 (28.40) 0.110 (2.79) 0.100 (2.54) 0.105 (2.67) 0.095 (2.41) MECHANICAL DATA 0.037 (0.94) 0.027 (0.68) 0.022 (0.56) 0.014 (0.36) PIN 1 0.205 (5.20) 0.195 (4.95) PIN 2 CASE Dimensions in inches and (millimeters) Case: JEDEC TO-220AC molded plastic body Terminals: Leads solderable per MIL-STD-750, Method 2026 Polarity: As marked Mounting Position: Any Mounting Torque: 5 in. - lbs. max. Weight: 0.08 ounces, 1.81 grams MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. SYMBOLS MBR1035 MBR1045 MBR1050 MBR1060 UNITS Maximum repetitive peak reverse voltage Maximum working peak reverse voltage Maximum DC blocking voltage Maximum average forward rectified current (SEE FIG. 1) VRRM VRWM VDC I(AV) IFRM 35 35 35 45 45 45 10.0 20.0 50 50 50 60 60 60 Volts Volts Volts Amps Amps Peak repetitive forward current at TC=135°C (square wave 20 KHZ) Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Peak repetitive reverse surge current (NOTE 1) Voltage rate of change (rated VR) Maximum instantaneous forward voltage at (NOTE 2) IF=10A, TC=25°C IF=10A, TC=125°C IF=20A, TC=25°C IF=20A, TC=125°C IFSM IRRM dv/dt VF 0.57 0.84 0.72 1.0 150.0 0.5 10,000 0.80 0.70 0.95 0.85 0.10 15.0 2.0 -65 to +150 -65 to +175 Amps Amps Vµs Volts Maximum instantaneous reverse current at rated DC blocking voltage TC= 25°C (NOTE 2) TC=125°C Maximum thermal resistance, junction to case Operating junction temperature range Storage temperature range NOTES: (1) 2.0µs pulse width, f=1.0 KHZ (2) Pulse test: 300µs pulse width, 1% duty cycle IR RΘJC TJ TSTG mA °C/W °C °C 4/98 RATINGS AND CHARACTERISTIC CURVES MBR1035 THRU MBR1060 FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 175 FIG. 1 - FORWARD CURRENT DERATING CURVE PEAK FORWARD SURGE CURRENT, AMPERES 12 RESISTIVE OR INDUCTIVE LOAD 150 125 100 75 50 25 0.1 AVERAGE FORWARD CURRENT, AMPERES 10 8 6 4 2 MBR1035 - MBR1045 MBR1050 & MBR1060 1 10 100 NUMBER OF CYCLES AT 60 HZ 0 0 50 100 150 FIG. 4 - TYPICAL REVERSE CHARACTERISTICS CASE TEMPERATURE, °C 20 FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT, MILLIAMPERES 10 MBR1035 - MBR1045 MBR1050 & MBR1060 50 INSTANTANEOUS FORWARD CURRENT, AMPERES TJ=125°C 1 10 TJ=125°C PULSE WIDTH=300µs 1% DUTY CYCLE 1 TJ=25°C 0.1 TJ=75°C 0.1 0.01 TJ=25°C MBR1035 - MBR1045 MBR1050 & MBR1060 0.01 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 INSTANTANEOUS FORWARD VOLTAGE, VOLTS 0.001 0 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE, % FIG. 6 - TYPICAL TRANSIENT THERMAL IMPEDANCE 100 FIG. 5 - TYPICAL JUNCTION CAPACITANCE 4,000 JUNCTION CAPACITANCE, pF TRANSIENT THERMAL IMPEDANCE, °C/W 1,000 TJ=25°C f=1.0 MHz Vsig=50mVp-p 10.0 MBR1035 - MBR1045 MBR1050 & MBR1060 1 100 0.1 1 10 100 REVERSE VOLTAGE, VOLTS 0.1 0.01 0.1 1 t, PULSE DURATION, sec. 10 100