MPG06A THRU MPG06M
MINIATURE GLASS PASSIVATED JUNCTION PLASTIC RECTIFIER
Reverse Voltage - 50 to 1000 Volts
Case Style MPG06
Forward Current - 1.0 Ampere
FEATURES
♦ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ♦ Low forward voltage, high current capability ♦ Glass passivated chip junction ♦ High surge capability ♦ Typical IR less than 0.1µA ♦ High temperature soldering guaranteed: 250°C/10 seconds, 0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension
0.100 (2.54) 0.090 (2.29) DIA
1.0 (25.4) MIN.
0.125 (3.18) 0.115 (2.92)
MECHANICAL DATA
1.0 (25.4) MIN. 0.025 (0.635) 0.023 (0.584) DIA.
Dimensions are in inches and (millimeters)
Case: Molded plastic over passivated chip Terminals: Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.0064 ounce, 0.181 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
SYMBOLS
MPG 06A
MPG 06B
MPG 06D
MPG 06G
MPG 06J
MPG 06K
MPG 06M
UNITS
Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current 0.375" (9.5mm) lead length at TA=25°C Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum instantaneous forward voltage at 1.0A Maximum DC reverse current at rated DC blocking voltage Typical junction capacitance Typical reverse recovery time Typical thermal resistance
(NOTE 3)
VRRM VRMS VDC I(AV)
50 35 50
100 70 100
200 140 200
400 280 400 1.0
600 420 600
800 560 800
1000 700 1000
Volts Volts Volts Amp
IFSM VF IR CJ trr RΘJA RΘJL TJ, TSTG
40.0 1.1 5.0 50.0 10.0 0.6 67.0 30.0 -55 to +150
Amps Volts µA pF µs °C/W °C
TA=25°C TA=125°C
(NOTE 1) (NOTE 2)
Operating junction and storage temperature range
NOTES: (1) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts (2) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A (3) Thermal resistance from junction to ambient and from junction to lead at 0.375" (9.5mm) lead length, P.C.B. mounted with 0.22 x 0.22” (5.5 x 5.5mm) copper pads
4/98
RATINGS AND CHARACTERISTIC CURVES MPG06A THRU MPG06M
FIG. 1 - FORWARD CURRENT DERATING CURVE FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PEAK FORWARD SURGE CURRENT, AMPERES
1.2
AVERAGE FORWARD RECTIFIED CURRENT, AMPERES
1.0 0.8 0.6 0.4 0.2 0
CAPACITANCE LOADS 5.0 Ipk/IAV = 10 20
60 HZ RESISTIVE OR INDUCTIVE LOAD 0.375" (9.5mm) LEAD LENGTH
50 40 30
RATED LOAD TJ=TJ max. 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) NO LOAD CONDITION
20 10 0
0
25
50
75
100 125 150 175
1
10
NUMBER OF CYCLES AT 60 HZ
100
AMBIENT TEMPERATURE, °C
FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT, MICROAMPERES
FIG. 4 - TYPICAL REVERSE CHARACTERISTICS
30
10
TJ=125°C
10
INSTANTANEOUS FORWARD CURRENT, AMPERES
TJ=150°C
1
TJ=75°C
1
TJ=25°C PULSE WIDTH=300µs 1% DUTY CYCLE
0.1
TJ=25°C
0.1
0.01 0
20
40
60
80
100
PERCENT OF RATED PEAK REVERSE VOLTAGE, %
0.01 0.4
0.6
0.8
1.0 1
1.2
1.4
1.6
1.8
INSTANTANEOUS FORWARD VOLTAGE, VOLTS
TRANSIENT THERMAL IMPEDANCE, °C/W
FIG. 5 - TYPICAL JUNCTION CAPACITANCE
FIG. 6 - TYPICAL TRANSIENT THERMAL IMPEDANCE
30
JUNCTION CAPACITANCE, pF
TJ=25°C f=1.0 MHZ Vsig=50mVp-p
100
10
10
1
1
1
10
REVERSE VOLTAGE, VOLTS
100
0.1 0.01
0.1
1
10
100
t, PULSE DURATION, sec.
很抱歉,暂时无法提供与“MPG06G”相匹配的价格&库存,您可以联系我们找货
免费人工找货