SBL3030PT

SBL3030PT AND SBL3040PT SCHOTTKY RECTIFIER Reverse Voltage - 30 and 40 Volts Forward Current - 30.0 Amperes FEATURES TO-247AD 0.645 (16.4) 0.625 (15.9) 0.203 (5.16) 0.193 (4.90) 0.245 (6.2) 0.225 (5.7) 0.323 (8.2) 0.313 (7.9) 10o 30o 0.078 REF (1.98) 0.170 (4.3) 0.840 (21.3) 0.820 (20.8) 10o TYP. BOTH SIDES 0.142 (3.6) 0.138 (3.5) 1 2 3 0.086 (2.18) 0.076 (1.93) 1o REF. BOTH SIDES 0.118 (3.0) 0.108 (2.7) 0.127 (3.22) 0.160 (4.1) 0.140 (3.5) 0.795 (20.2) 0.775 (19.6) 0.117 (2.97) ♦ Plastic package has Underwriters Laboratory Flammability Classifications 94V-0 ♦ Metal to silicon rectifier, majority carrier conduction ♦ Low power loss, high efficiency ♦ High current capability, low forward voltage drop ♦ High surge capability ♦ For use in low voltage, high frequency inverters, free wheeling, and polarity protection applications ♦ Dual rectifier construction, positive center-tap ♦ Guardring for overvoltage protection ♦ High temperature soldering guaranteed: 250°C/10 seconds, 0.17” (4.3mm) 0.048 (1.22) 0.225 (5.7) 0.205 (5.2) 0.044 (1.12) 0.030 (0.76) 0.020 (0.51) PIN 2 CASE MECHANICAL DATA Case: JEDEC TO-247AD molded plastic body Terminals: Lead solderable per MIL-STD-750, Method 2026 Polarity: As marked Mounting Torque: 10 in. - lbs. max. Mounting Position: Any Weight: 0.2 ounce, 5.6 grams PIN 1 PIN 3 Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. SYMBOLS SBL3030PT SBL3040PT UNITS Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current at TC=100°C Peak forward surge current, 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum instantaneous forward voltage per leg at 15A (NOTE 1) Maximum instantaneous reverse current at TC=25°C rated DC blocking voltage per leg (NOTE 1) TC=100°C Typical thermal resistance (NOTE 2) Operating junction and storage temperature range VRRM VRMS VDC I(AV) 30 21 30 30.0 40 28 40 Volts Volts Volts Amps IFSM VF IR RΘJC TJ, TSTG 275.0 0.55 1.0 75.0 1.5 -40 to +125 Amps Volts mA °C/W °C NOTES: (1) Pulse test: 300µs pulse width, 1% duty cycle (2) Thermal resistance from junction to case per leg 4/98 RATINGS AND CHARACTERISTIC CURVES SBL3030PT AND SBL3040PT FIG. 1 - FORWARD CURRENT DERATING CURVE PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD CURRENT, AMPERES FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PER LEG 30 RESISTIVE OR INDUCTIVE LOAD 300 250 200 150 100 50 0 1 24 18 12 6 0 0 50 100 150 TJ=TJ max. 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 10 NUMBER OF CYCLES AT 60 Hz 100 CASE TEMPERATURE, °C FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS PER LEG FIG. 4 - TYPICAL REVERSE CHARACTERISTICS PER LEG 50 PULSE WIDTH=300µs 1% DUTY CYCLE 100 INSTANTANEOUS FORWARD CURRENT, AMPERES INSTANTANEOUS REVERSE CURRENT, MILLIAMPERES 10 10 TJ=125°C TJ=125°C 1 TJ=25°C 1 TJ=75°C 0.1 0.1 0.01 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 INSTANTANEOUS FORWARD VOLTAGE, VOLTS 0.01 0 20 40 TJ=25°C 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE, % FIG. 5 - TYPICAL JUNCTION CAPACITANCE PER LEG FIG. 6 - TYPICAL TRANSIENT THERMAL IMPEDANCE PER LEG TRANSIENT THERMAL IMPEDANCE, °C/W 5,000 JUNCTION CAPACITANCE, pF 100 TJ=25°C f=1.0 MHz Vsig=50mVp-p 10 1,000 1 100 0.1 1 10 100 0.1 0.01 0.1 1 10 100 REVERSE VOLTAGE, VOLTS t, PULSE DURATION, sec.