SL13

NEW PRODUCT NEW PRODUCT NEW PRODUCT SL12 AND SL13 LOW VF SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER Reverse Voltage - 20 to 30 Volts DO-214AC Forward Current - 1.0 Ampere FEATURES ♦ Plastic package has Underwriters Laboratory Flammability classification 94V-0 ♦ For surface mount applications ♦ Low profile package ♦ Built-in strain relief ♦ Metal silicon junction, majority carrier conduction ♦ Low power loss, high efficiency ♦ High current capability, low forward voltage drop ♦ High surge capability ♦ For use in low voltage high frequency inverters, free wheeling, and polarity protection applications ♦ Guardring for overvoltage protection ♦ High temperature soldering guaranteed: 250°C/10 seconds on terminals 0.065 (1.65) 0.049 (1.25) 0.110 (2.79) 0.100 (2.54) 0.177 (4.50) 0.157 (3.99) 0.012 (0.305) 0.006 (0.152) 0.090 (2.29) 0.078 (1.98) 0.060 (1.52) 0.030 (0.76) 0.008 (0.203) MAX. 0.208 (5.28) 0.194 (4.93) MECHANICAL DATA Case: JEDEC DO-214AC molded plastic body Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Weight: 0.002 ounce 0.064 gram Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS . Ratings at 25°C ambient temperature unless otherwise specified. SYMBOLS SL12 SL13 UNITS Device marking code Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current (NOTE 2) at TL (SEE FIG. 1) Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum instantaneous forward voltage at: IF=0.1A, TA=125°C (NOTE 1) IF=0.1A, TA=25°C IF=1.0A, TA=125°C IF=1.0A, TA=25°C Maximum DC reverse current (NOTE 1) TA=25°C at rated DC blocking voltage TA=100°C Typical thermal resistance (NOTE 2) Operating junction temperature range Storage temperature range NOTES: (1) Pulse test: 300µs pulse width, 1% duty cycle (2) P.C.B. mounted with 0.2 x 0.2” (5.0 x 5.0mm) copper pad areas L2 VRRM VRMS VDC I(AV) 20 14 20 1.0 L3 30 21 30 Volts Volts Volts Amps IFSM 50 Amps VF 0.230 0.360 0.340 0.445 0.2 6.0 88 28 -55 to +125 -55 to +150 Volts IR RΘJA RΘJL TJ TSTG mA °C/W °C °C 4/98 RATINGS AND CHARACTERISTIC CURVES SL12 AND SL13 FIG. 1 - FORWARD CURRENT DERATING CURVE FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PEAK FORWARD SURGE CURRENT, AMPERES 1.0 AVERAGE FORWARD CURRENT, AMPERES RESISTIVE OR INDUCTIVE LOAD 50 40 30 20 10 0 1 10 NUMBER OF CYCLES AT 60HZ 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) AT RATED TL 0.5 P.C.B. MOUNTED ON 0.2 x 0.2” (5.0 x 5.0mm) COPPER PAD AREAS 100 0 50 60 70 80 90 100 110 120 130 140 150 160 170 LEAD TEMPERATURE, °C FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG. 4 - TYPICAL REVERSE CHARACTERISTICS 50 100 10.0 INSTANTANEOUS FORWARD CURRENT, AMPERES TJ=125°C TJ=25°C INSTANTANEOUS REVERSE CURRENT, MILLIAMPERES 10 TA=100°C 1 1 0.1 0.1 0.01 TA=25°C 0.01 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 INSTANTANEOUS FORWARD VOLTAGE, VOLTS 0.001 0 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE, % FIG. 5 - TYPICAL JUNCTION CAPACITANCE 500 JUNCTION CAPACITANCE, pF TJ=25°C f=1.0 MHz Vsig=50mVp-p 100 10 0.1 1 10 100 REVERSE VOLTAGE, VOLTS