595NM

SOLDERING INSTRUCTIONS FOR THROUGH HOLE LEDs DIP AND WAVE SOLDERING Temperature Maximum of the Soldering Soldering Bath Time ≤260oC ≤260oC 3s 5s Distance from Solder Joint to Case >2mm >4mm IRON SOLDERING (with 1.5mm IRON TIP) Temperature of the Soldering Iron ≤260oC ≤260oC Maximum Soldering Time 3s 5s Distance From Solder Joint to Case >2mm >4mm RECOMMENDED SOLDERING PATTERN FOR SMT LEDs 1 2 3 4 5 6 7 8 9 10 SOLDERING INSTRUCTIONS FOR SMT LEDs Surface Mount LEDs are temperature sensitive and must be handled with extreme care. IR Reflow Soldering and Vapor Phase Reflow Soldering are recommended. Wave Soldering is not recommended for surface mount LEDs. Please request our SMT LED Soldering Notes 155-1209. Note: Above dimensions in millimeters 84 Telephone: 781-935-4442 Fax: 781-938-5867 sales@gilway.com www.gilway.com Engineering Catalog 169 LED TECHNICAL DATA Absolute Maximum Ratings (TA=25°C) 430nm (GaN) 470nm (GaN) 525nm (GaN) 555nm (GaP) 565nm (GaP) 590nm (GaAsP/ GaP) 595nm (InGaAlP) Unit Reverse Voltage 5 5 5 5 5 5 5 V Forward Current 30 30 25 30 25 30 25 mA Forward Current (Peak) t ≤10us 100 100 150 100 150 150 150 mA Power Dissipation 105 120 105 120 105 105 105 mW Operating Temperature -20 to +80 -30 to +85 -40 to +85 -30 to +85 -40 to +85 -40 to +85 -40 to +85 o C Storage Temperature -30 to +100 -40 to +100 -40 to +85 -40 to +100 -40 to +85 -40 to +85 -40 to +85 o C Operating Characteristics (TA=25 C) o 430nm (GaN) 470nm (GaN) 525nm (GaN) 555nm (GaP) 565nm (GaP) 590nm (GaAsP/ GaP) 2.1 595nm (InGaAlP) Unit Forward Voltage (typ.) IF=20mA 4.5 3.6 3.5 2.25 2.2 2.0 V Forward Voltage (max.) IF=20mA 5.5 4.0 4.0 2.6 2.5 2.5 2.5 V Reverse Current VR=5V 100 50 50 10 10 10 10 uA Wavelength at Peak Emmission IF=20mA 430 470 525 555 565 590 595 nm Spectral line half-width IF=20mA 65 30 40 30 30 35 15 nm Capacitance VF=0V, f=1MHz 100 50 50 45 45 10 33 pF Telephone: 781-935-4442 Fax: 781-938-5867 sales@gilway.com www.gilway.com Engineering Catalog 169 85 LED TECHNICAL DATA Absolute Maximum Ratings (TA=25 C) ° 610nm (GaAsP/ GaP) 620nm (InGaAlP) 625nm (GaAsP/ GaP) 660nm (GaAlAs) 700nm (GaP) 880nm (GaAlAs) 940nm (GaAs) Unit Reverse Voltage 5 5 5 5 5 5 5 V Forward Current 30 30 30 30 25 50 50 mA Forward Current (Peak) t ≤10us 150 150 150 150 150 1200 1200 mA Power Dissipation 105 75 105 100 120 100 100 mW Operating Temperature -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 o C Storage Temperature -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 o C Operating Characteristics (TA=25oC) 610nm (GaAsP/ GaP) 2.0 620nm (InGaAlP) 625nm (GaAsP/ GaP) 2.0 660nm (GaAlAs) 700nm (GaP) 880nm (GaAlAs) 940nm (GaAs) Unit Forward Voltage (typ.) IF=20mA 1.95 1.85 2.0 1.4 1.2 V Forward Voltage (max.) IF=20mA 2.6 2.5 2.5 2.5 2.5 1.7 1.5 V Reverse Current VR=5V 10 10 10 10 10 10 10 uA Wavelength at Peak Emmission IF=20mA 610 620 625 660 700 880 940 nm Spectral line half-width IF=20mA 35 15 45 20 45 50 50 nm Capacitance VF=0V, f=1MHz 15 40 12 LEDs 95 40 90 90 pF 86 Telephone: 781-935-4442 Fax: 781-938-5867 sales@gilway.com www.gilway.com Engineering Catalog 169 TECHNICAL DATA 5V/12V LED WITH INTERNAL RESISTANCE Absolute Maximum Ratings (TA=25 C) o 565nm (GaP) 590nm (GaAsP/GaP) 625nm (GaAsP/GaP) 660nm (GaAlAs) Unit Reverse Voltage Forward Current (Peak) t≤10us 5 150 0.7 310 -40 to +85 5 150 0.7 310 -40 to +85 5 150 0.7 310 -40 to +85 5 200 0.35 300 -40 to +85 V mA mA mW o Derating linear from 50oC Power Dissipation Operating/Storage Temperature C Operating Characteristics (TA=25 C) o 565nm (GaP) 590nm (GaAsP/GaP) 625nm (GaAsP/GaP) 660nm (GaAlAs) Unit Forward Current (typ) VF=5V VF=12V Reverse Current VR=5v 12 11 10 565 12 11 10 590 12 11 10 625 13 10 10 660 mA mA uA nm Wavelength at Peak Emmission IF=20mA Spectraline half-width IF=20mA 30 35 45 20 nm RELATIVE INTENSITY VS. WAVELENGTH Telephone: 781-935-4442 Fax: 781-938-5867 sales@gilway.com www.gilway.com Engineering Catalog 169 87 LED TECHNICAL DATA 430nm (GaN) 470nm (GaN) 525nm (GaN) 555nm (GaP) 88 Telephone: 781-935-4442 Fax: 781-938-5867 sales@gilway.com www.gilway.com Engineering Catalog 169 LED TECHNICAL DATA 565nm (GaP) 590nm (GaAsP/GaP) 595nm (InGaAlP) 610nm (GaAsP/GaP) Telephone: 781-935-4442 Fax: 781-938-5867 sales@gilway.com www.gilway.com Engineering Catalog 169 89 LED TECHNICAL DATA 620nm (InGaAlP) 625nm (GaAsP/GaP) 660nm (GaAlAs) 700nm (GaP) 90 Telephone: 781-935-4442 Fax: 781-938-5867 sales@gilway.com www.gilway.com Engineering Catalog 169 LED TECHNICAL DATA WHITE 880nm (GaAlAs) 940nm (GaAs) Telephone: 781-935-4442 Fax: 781-938-5867 sales@gilway.com www.gilway.com Engineering Catalog 169 91 LED TECHNICAL DATA Lead Forming Guidelines Custom Lead Options Contact us with your requirements and specifications. Custom lead forming LED Cleaning • • • We recommend using isopropyl alcohol to clean our LEDs. Avoid using any unspecified chemical solvent such as Trichlororethylene, Chlorosen or Acetone. If cleaning is required, perform in one minute or less under normal temperature conditions. 92 Telephone: 781-935-4442 Fax: 781-938-5867 sales@gilway.com www.gilway.com Engineering Catalog 169