171-003-8P-8K1-18-P1

171-003 Single Row MicroStrips with Insulated Stranded Wire These .050" pitch single row microstrips are factory-terminated to military-grade hookup wire. Crimp termination. Available with 1 to 30 contacts. Optional latching mechanism prevents de-mating. Guide pins provide circuit polarization. Contacts are twistpin type and are gold-plated. Housing is molded LCP thermoplastic. Available with standard M22759/11 ETFE wire, or upgrade to M22759/33 space grade wire. Suitable for high-reliability applications where long-term resistance to fretting corrosion is a necessity. 3 A., 600 Vac, -55C to +150C. Wire is 600V, 200C. 171-003-7P-6K7-18-P1CL How To Order Single Row Microstrips With Insulated Wire Series Number of Cavities Contact Type Wire Gage Wire Type Wire Color Code White Wire Length Optional Guide Pin Optional Latch Optional Mounting Holes For No Mounting Holes Mounting Holes Single Row Total Number MicroStrip, of Cavities .050" Contact including Spacing, guide Pre-Wired, pins,latches Stranded Wire and mounting holes. The number of cavities equals the number of electrical circuits plus 1 cavity for each guide pin and latch, plus 6 cavities for the mounting hole option. 171-003 -1 TO -30 Pin Contacts P #24 AWG #26 AWG #28 AWG #30 AWG -4 -6 -8 Standard Wire K 1 Wire Omit Omit Length In For No Guide For No Latch Inches Pin Omit Socket Contacts S -0 18 are 1-10 are solid color, frequently used Space Grade 11-up are lengths. striped. Example: Extruded 5 PTFE per CL - P1 Color-18 M22759/11, Coded Guide Pin in Center Latch Silver-Plated per MIL- 18 inches Cav. #1 Conductors STD-681 (#30 AWG 6, 12 and not available) Wires MH J Wire High Strength, Lightweight, Crosslinked Modified ETFE per M22759/33, Silver-Plated Conductors Guide Pin at Latch at Both Both Ends Ends -PB BL 10 Color Repeat Wires are solid color per MILSTD-681 color code system. Wires #1, #11, #21 are black, wires #2, #12, #22 are brown, and so on. 7 Replace (X) with guide pin location. P3 shown below: - P(X) The three cavities on each end are filled with epoxy. Two .062" (1.57mm) holes are cross-drilled to allow for attachment to a mounting surface. Sample Part Number 171-003 -7 P -6 K 7 -18 -P1 CL © 2011 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. www.glenair.com GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: sales@glenair.com Q-7 Micro-D Latching MicroStri ps Series 171 MicroStrips Single Row Strips with Insulated Wire Q Series 171 MicroStrips Single Row Strips with Solid or Stranded Wire 171-002 and 171-003 PIN CONNECTOR .075 (1.91) TYP .300 (7.62) 2Xø.062 (1.57) C .110 (2.79) MAX .125 (3.18) .135/.116 (3.43/2.95) .075 (1.91) MAX .062 (1.57) .200 (5.08) REF .075 (1.91) LENGTH MIN Micro-D Latching MicroStri ps .075 (1.91) (A) B SOCKET CONNECTOR 2Xø.062 (1.57) .125 (1.27) .050 (3.18) MAX .075 (1.91) TYP C LENGTH MIN .125 (3.18) .125 (1.27) .050 (3.18) MAX .075 (1.91) (A) B Dimensions # of Cavities 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 (A) In. .050 .100 .150 .200 .250 .300 .350 .400 .450 .500 .550 .600 .650 .700 B Max. mm. In. .085 .135 .185 .235 .285 .335 .385 .435 .485 .535 .585 .635 .685 .735 .785 C In. N/A N/A N/A N/A N/A N/A .200 .250 .300 .350 .400 .450 .500 .550 .600 mm. 2.16 3.43 4.70 5.97 7.24 8.51 9.78 11.05 12.32 13.59 14.86 16.13 17.40 18.67 19.94 mm. N/A N/A N/A N/A N/A N/A 5.08 6.35 7.62 8.89 10.16 11.43 12.7 13.97 15.24 1.27 2.54 3.81 5.08 6.35 7.62 8.89 10.16 11.43 12.70 13.97 15.24 16.51 17.78 # of Cavities 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 (A) In. .750 .800 .850 .900 .950 1.000 1.050 1.100 1.150 1.200 1.250 1.300 1.350 1.400 1.450 B Max. mm. In. .835 .885 .935 .985 1.035 1.085 1.135 1.185 1.235 1.285 1.335 1.385 1.435 1.485 1.535 C In. .650 .700 .750 .800 .850 .900 .950 1.000 1.050 1.100 1.150 1.200 1.250 1.300 1.350 mm. 21.21 22.48 23.75 25.02 26.29 27.56 28.83 30.10 31.37 32.64 33.91 35.18 36.45 37.72 38.99 mm. 16.51 17.78 19.05 20.32 21.59 22.86 24.13 25.4 26.67 27.94 29.21 30.48 31.75 33.02 34.29 19.05 20.32 21.59 22.86 24.13 25.40 26.67 27.94 29.21 30.48 31.75 33.02 34.29 35.56 36.83 Center Latch Locations Even Number of Cavities PIN CONNECTOR SOCKET CONNECTOR Odd Number of Cavities PIN CONNECTOR SOCKET CONNECTOR Q CAVITY 1 CAVITY 1 CAVITY 1 CAVITY 1 Latch placed on next lower cavity prior to centerline. Latch position = (# of Cavities) ÷ 2. Latch placed in cavity on centerline. Latch Position = (# of Cavities+1) ÷ 2. © 2011 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. www.glenair.com GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: sales@glenair.com Q-8