310FS001C

310-001 O-Ring Sealed Shrink Boot Adapter Rotatable Coupling - Standard Profile 310 CONNECTOR DESIGNATORS 310 F S 001 M 16 D T Product Series Connector Designator Angle and Profile H = 45° J = 90° S = Straight Basic Part No. Shrink Boot (Table III Omit for None) Drain Holes (Omit for None) Shell Size (Table I) Finish (Table II) A-F-G* H-J*-L-S * Conn. Desig. G & J Consult Factory For 45° and 90° ROTATABLE COUPLING O-Ring A Thread (Table I) F (Table III) Drain Holes 4 Places Optional TABLE II - STANDARD FINISHES GLENAIR SYMBOL B C G M NF FINISH Cadmium Plate, Olive Drab Anodize, Black Hard Coat, Anodic Electroless Nickel Cadmium Plate, Olive Drab Over Electroless Nickel C Typ (Table I) Cable Entry E (Table III) See Back Cover for Complete Finish Information and Additional Finish Options G (Table IV) J (Table IV) H (Table IV) K (Table IV) © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 310 - Page 2 Rotatable Coupling - Standard Profile See inside back cover fold-out or pages 13 and 14 for unabridged Tables I and II. TABLE III: CABLE ENTRY AND SHRINK BOOT Shell Size - Conn. Desig. Cable Entry Min. A-F-J-L-S G-H E Max F Max .250 (6.4) 08 09 .533 (13.5) .940 (23.9) .355 (9.0) 10 11 .605 (15.4) .940 (23.9) .491 (12.5) 12 13 .774 (19.7) .940 (23.9) .565 (14.4) 14 15 .838 (21.3) .940 (23.9) .690 (17.5) 17 .963 (24.5) 16 .940 (23.9) .769 (19.5) 18 19 1.042 (26.5) .940 (23.9) .894 (22.7) 20 21 1.217 (30.9) .940 (23.9) 1.019 (25.9) 23 1.355 (34.4) 22 .940 (23.9) 1.134 (28.8) 1.443 (36.7) 24 25 .940 (23.9) 1.369 (34.8) 29 1.709 (43.4) 28 .940 (23.9) 1.615 (41.0) 1.919 (48.7) 32 33 1.005 (25.5) * Raychem Shrink Boot Supplied with "T" Option (see Part Number Development) Shrink Boot * 202K121-25-0 202K121-25-0 202K121-25-0 202K121-25-0 202K132-25-0 202K142-25-0 202K142-25-0 202K153-25-0 202K163-25-0 202K174-25-0 202K174-25-0 TABLE IV: DIMENSIONS Shell Size - Conn. Desig. G H A-F-L-S H Max Max 08 09 .639 (16.2) .810 (20.6) 10 11 .664 (16.9) .840 (21.3) 12 13 .688 (17.5) .860 (21.8) 15 14 .705 (17.9) .890 (22.6) 16 17 .732 (18.6) .910 (23.1) 19 18 .748 (19.0) .920 (23.4) 20 21 .773 (19.6) .940 (23.9) 22 23 .800 (20.3) .980 (24.9) 24 25 .823 (20.9) 1.010 (25.7) 29 28 1.041 (26.4) 1.180 (30.0) 32 33 1.092 (27.7) 1.370 (34.8) Now Available with the “NESTOR” J Max .750 (19.1) .810 (20.6) .870 (22.1) .920 (23.4) .980 (24.9) 1.020 (25.9) 1.080 (27.4) 1.140 (29.0) 1.200 (30.5) 1.480 (37.6) 1.610 (40.9) K Max .920 (23.4) .980 (24.9) 1.040 (26.4) 1.110 (28.2) 1.170 (29.7) 1.190 (30.2) 1.250 (31.8) 1.330 (33.8) 1.400 (35.6) 1.640 (41.7) 1.880 (47.8) Glenair’s Non-Detent, Spring-Loaded, SelfLocking Coupling. Add “-445” to Specify This AS85049 Style “N” Coupling Interface. © 2005 Glenair, Inc. 1. 2. 3. 4. See Shrink Boot Reference Information (page 40). Metric dimensions (mm) are indicated in parentheses. O-Rings not supplied with drain hole option. O-Rings not supplied with Connector Designators A and G. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 310 - Page 3 310 310-001 O-Ring Sealed Shrink Boot Adapter