370AB005G12

370-005 Splash-Proof Cable Sealing Backshell with Strain Relief Low Profile - Rotatable Coupling 370 F S 005 M 16 10 L 6 37 A-F-H-L-S ROTATABLE COUPLING CONNECTOR DESIGNATORS Product Series Connector Designator Angle and Profile A = 90° B = 45° S = Straight Basic Part No. Length: S only (1/2 inch increments: e.g. 6 = 3 inches) Strain Relief Style (L,G) Cable Entry (Tables IV, V) Shell Size (Table III) Finish (Table II) Length ± .060 (1.52) Min. Order Length 2.0 Inch (See Note 6) A Thread (Table I) C Typ. (Table I) Length * O-Rings .312 (7.9) Max * Length ± .060 (1.52) Min. Order Length 1.5 Inch (See Note 6) STYLE 2 (STRAIGHT See Note 1) .88 (22.4) Max (Table III) E G (Table III) F (Table III) H (Table III) STYLE 2 (45° & 90° See Note 1) STYLE L Light Duty (Table IV) .850 (21.6) Max Cable Range STYLE G Light Duty (Table V) .072 (1.8) Max Cable Range J K © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. www.glenair.com GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: sales@glenair.com Series 37 - Page 20 with Strain Relief Low Profile - Rotatable Coupling See inside back cover fold-out or pages 13 and 14 for unabridged Tables I and II. TABLE III: ELBOW DIMENSIONS E Max .457 (11.6) .520 (13.2) .582 (14.8) .645 (16.4) .738 (18.7) .926 (23.5) .926 (23.5) 1.020 (25.9) 1.020 (25.9) 1.145 (29.1) 1.207 (30.7) 1.238 (31.4) F Max 2.030 (51.6) 2.030 (51.6) 2.090 (53.1) 2.150 (54.6) 2.240 (56.9) 2.340 (59.4) 2.340 (59.4) 2.540 (64.5) 2.540 (64.5) 2.680 (68.1) 2.680 (68.1) 2.680 (68.1) G Max .500 (12.7) .595 (15.1) .610 (15.5) .700 (17.8) .885 (22.5) .975 (24.8) .975 (24.8) 1.125 (28.6) 1.125 (28.6) 1.225 (31.1) 1.575 (40.0) 1.775 (45.1) H Max 2.040 (51.8) 2.040 (51.8) 2.160 (54.9) 2.180 (55.4) 2.250 (57.2) 2.340 (59.4) 2.340 (59.4) 2.510 (63.8) 2.510 (63.8) 2.620 (66.5) 2.620 (66.5) 2.620 (66.5) Shell Size Conn. Desig. H A-F-L-S 09 08 11 10 13 12 15 14 17 16 19 18 21 20 23 22 25 24 28 32 36 Dash No. 01 02 03 04 05 06 07 08 09 10 TABLE IV: CABLE ENTRY Cable Range J Max Min Max .781 (19.8) .062 (1.6) .125 (3.2) .968 (24.6) .125 (3.2) .250 (6.4) 1.046 (26.6) .250 (6.4) .375 (9.5) 1.156 (29.4) .250 (6.4) .500 (12.7) 1.218 (30.9) .375 (9.5) .625 (15.9) 1.343 (34.1) .500 (12.7) .750 (19.1) 1.468 (37.3) .625 (15.9) .875 (22.2) 1.593 (40.5) .625 (15.9) 1.000 (25.4) 1.718 (43.6) .750 (19.1) 1.125 (28.6) 1.843 (46.8) .875 (22.2) 1.250 (31.8) Dash No. 01 02 03 04 05 06 07 08 09 10 TABLE V: CABLE ENTRY Cable Range K Max Min Max .593 (15.1) .062 (1.6) .125 (3.2) .718 (18.2) .125 (3.2) .250 (6.4) .873 (22.2) .250 (6.4) .375 (9.5) .968 (24.6) .375 (9.5) .500 (12.7) 1.109 (28.2) .500 (12.7) .625 (15.9) 1.218 (30.9) .625 (15.9) .750 (19.1) 1.343 (34.1) .750 (19.1) .875 (22.2) 1.468 (37.3) .875 (22.2) 1.000 (25.4) 1.593 (40.5) 1.000 (25.4) 1.125 (28.6) 1.718 (43.6) 1.125 (28.6) 1.250 (31.8) TABLE II: STANDARD FINISHES GLENAIR SYMBOL B C G M NF FINISH Cadmium Plate, Olive Drab Anodize, Black Hard Coat, Anodic Electroless Nickel Cadmium Plate, Olive Drab Over Electroless Nickel 1. When maximum cable entry (page 21) is exceeded, Style 2 will be supplied. Dimensions E, F, G and H will not apply. Please consult factory. 2. Metric dimensions (mm) are indicated in parentheses. 3. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 4. Interface O-Ring not supplied with connector designator A. 5. Consult factory for shorter lengths on straight backshells. See Inside Back Cover for Additional Finish Options © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. www.glenair.com GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: sales@glenair.com Series 37 - Page 21 37 370-005 Splash-Proof Cable Sealing Backshell