400FD002M20

400-002 TAG Ring Backshell ® 40 with Strain Relief Direct Coupling - Split-Shell 400 F D 002 M 16 06 L A-B -C-D-E-F G-H-J-K-L-S * Conn. Desig. B See Note 3 CONNECTOR DESIGNATORS * Product Series Connector Designator Angle and Profile C = Ultra-Low Split 90 D = Split 90 F = Split 45 Strain Relief Style (F, G, L) Cable Entry (Table V, VI) Shell Size (Table I) Finish (Table II) Basic Part No. F (Table IV) DIRECT COUPLING A Thread (Table I) J Typ. D (Table III) (Table IV) B Typ. (Table I) E (Table IV) Split 45° Ground Spring Cable Entry G (Table IV) Split 90° M (Table V) STYLE F Light Duty (Table VI) .416 (10.5) Max Cable Range N (Table VI) L (Table IV) H (Table IV) N STYLE G Light Duty (Table V) .072 (1.8) Approx. Cable Entry STYLE L Light Duty (Table VI) .850 (21.6) Approx. Max Wire Bundle (Table IV, Note 2) K (Table IV) M Cable Range N Ultra LowProfile Split 90° Printed in U.S.A. © 2005 Glenair, Inc. CAGE Code 06324 GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 40 - Page 14 with Strain Relief Direct Coupling - Split Shell Shell Size 08/09 10/11 12/13 14/15 16/17 18/19 20/21 22/23 24/25 28/29 32/33 36 40 TABLE III: FRONT ADAPTER J Max - Conn. Designator A-E-F D-B-G-K J-H-L-S C 1.180 (30.0) 1.250 (31.8) 1.180 (30.0) 1.250 (31.8) 1.180 (30.0) 1.250 (31.8) 1.735 (44.1) 1.180 (30.0) 1.250 (31.8) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.610 (40.9) 1.560 (39.6) 1.915 (48.6) 1.610 (40.9) 1.750 (44.5) 1.915 (48.6) 1.610 (40.9) 1.750 (44.5) 1.915 (48.6) 1.610 (40.9) 2.190 (55.6) 1.915 (48.6) See inside back cover fold-out or pages 13 and 14 for Tables I and II. 1. Metric dimensions (mm) are indicated in parentheses. 2. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 3. When using Connector Designator B refer to pages 18 and 19 for part number development. TABLE IV: DIMENSIONS Dash D No. Max 02 .440 (11.2) 03 .500 (12.7) 04 .560 (14.2) 05 .620 (15.7) 06 .680 (17.3) 07 .750 (19.1) 08 .820 (20.8) 09 .880 (22.4) 10 .940 (23.9) E Max 1.500 (38.1) 1.560 (39.6) 1.630 (41.4) 1.660 (42.2) 1.760 (44.7) 1.820 (46.2) 1.880 (47.8) 1.940 (49.3) 2.000 (50.8) F Max .680 (17.3) .750 (19.1) .810 (20.6) .870 (22.1) .930 (23.6) 1.000 (25.4) 1.060 (26.9) 1.120 (28.4) 1.180 (30.0) G Max 1.440 (36.6) 1.500 (38.1) 1.570 (39.9) 1.600 (40.6) 1.700 (43.2) 1.760 (44.7) 1.820 (46.2) 1.880 (47.8) 1.940 (49.3) H Max .340 (8.6) .270 (6.9) .270 (6.9) .280 (7.1) .420 (10.7) .640 (16.3) .640 (16.3) .540 (13.7) .540 (13.7) K Max 2.060 (52.3) 2.220 (56.4) 2.220 (56.4) 2.290 (58.2) 2.340 (59.4) 2.370 (60.2) 2.370 (60.2) 2.520 (64.0) 2.520 (64.0) L Max .681 (17.3) .731 (18.6) .731 (18.6) .831 (21.1) .981 (24.9) 1.181 (30.0) 1.181 (30.0) 1.181 (30.0) 1.181 (30.0) Function C Max Wire Bundle .250 (6.4) .375 (9.5) .375 (9.5) .500 (12.7) .625 (15.9) .625 (15.9) .625 (15.9) .750 (19.1) .750 (19.1) Dash No. 02 03 04 05 06 07 08 09 10 TABLE V: CABLE ENTRY M Cable Entry Max Max .545 (13.8) .250 (6.4) .670 (17.0) .375 (9.5) .795 (20.2) .500 (12.7) .920 (23.4) .625 (15.9) 1.045 (26.5) .750 (19.1) 1.170 (29.7) .875 (22.2) 1.295 (32.9) 1.000 (25.4) 1.420 (36.1) 1.125 (28.6) 1.670 (42.4) 1.250 (31.8) Dash No. 02 03 04 05 06 07 08 09 10 TABLE VI: CABLE ENTRY N Cable Range Max Min Max .968 (24.6) .125 (3.2) .250 (6.4) 1.046 (26.6) .250 (6.4) .375 (9.5) 1.156 (29.4) .250 (6.4) .500 (12.7) 1.218 (30.9) .375 (9.5) .625 (15.9) 1.343 (34.1) .500 (12.7) .750 (19.1) 1.468 (37.3) .625 (15.9) .875 (22.2) 1.593 (40.5) .625 (15.9) 1.000 (25.4) 1.718 (43.6) .750 (19.1) 1.125 (28.6) 1.843 (46.8) .875 (22.2) 1.250 (31.8) © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 40 - Page 15 40 400-002 TAG Ring Backshell ®