400FS002M12

400-002 TAG Ring Backshell ® 40 with Strain Relief Direct Coupling - Low Profile 400 F S 002 M 16 06 L 6 A-B -C-D-E-F G-H-J-K-L-S * Conn. Desig. B See Note 5 CONNECTOR DESIGNATORS * Product Series Connector Designator Angle and Profile A = 90 B = 45 S = Straight Basic Part No. Length ± .060 (1.52) Min. Order Length 1.5 Inch (See Note 4) Length: S only (1/2 inch increments: e.g. 6 = 3 inches) Strain Relief Style (F, G, L) Cable Entry (Tables V, VI) Shell Size (Table I) Finish (Table II) DIRECT COUPLING Length ± .060 (1.52) Min. Order Length 2.0 Inch (See Note 4) A Thread (Table I) B (Table I) Ground Spring STYLE 2 (STRAIGHT See Note 1) J E (Table III) (Table IV) Shown with Style G Nut J G (Table III) (Table IV) B (Table I) F (Table IV) B (Table I) H (Table IV) Shown with Style L Strain Relief STYLE F Light Duty (Table VI) .416 (10.5) Approx. Cable Range © 2005 Glenair, Inc. STYLE G Light Duty (Table V) .072 (1.8) Approx. STYLE L Light Duty (Table VI) .850 (21.6) Approx. L Cable Entry K Cable Range L CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 40 - Page 10 with Strain Relief Direct Coupling - Low Profile Shell Size 08/09 10/11 12/13 14/15 16/17 18/19 20/21 22/23 24/25 28/29 32/33 36 40 TABLE III: FRONT ADAPTER J Max - Conn. Designator A-D-E-F B-G-K J-H-L-S C 1.000 (25.4) 1.250 (31.8) 1.000 (25.4) 1.250 (31.8) 1.000 (25.4) 1.250 (31.8) 1.735 (44.1) 1.000 (25.4) 1.250 (31.8) 1.915 (48.6) 1.000 (25.4) 1.416 (36.0) 1.915 (48.6) 1.000 (25.4) 1.416 (36.0) 1.915 (48.6) 1.000 (25.4) 1.416 (36.0) 1.915 (48.6) 1.000 (25.4) 1.416 (36.0) 1.915 (48.6) 1.000 (25.4) 1.416 (36.0) 1.915 (48.6) 1.000 (25.4) 1.416 (36.0) 1.915 (48.6) 1.000 (25.4) 1.416 (36.0) 1.915 (48.6) 1.000 (25.4) 1.416 (36.0) 1.915 (48.6) 1.000 (25.4) 1.687 (42.9) 1.915 (48.6) See inside back cover fold-out or pages 13 and 14 for Tables I and II. 1. When maximum cable entry (page 22) is exceeded, Style 2 will be supplied. (Function S only). 2. Metric dimensions (mm) are indicated in parentheses. 3. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 4. Consult factory for shorter lengths on straight backshells. 5. When using Connector Designator B refer to pages 18 and 19 for part number development. Elbow Size 02 03 04 05 06 07 08 09 10 TABLE IV: ELBOW DIMENSIONS E F G Max Max Max .630 (16.0) 1.720 (43.7) .636 (16.2) .630 (16.0) 1.720 (43.7) .709 (18.0) .692 (17.6) 1.780 (45.2) .734 (18.6) .755 (19.2) 1.870 (47.5) .829 (21.1) .848 (21.5) 1.970 (50.0) .990 (25.1) 1.036 (26.3) 2.170 (55.1) 1.000 (25.4) 1.130 (28.7) 2.310 (58.7) 1.325 (33.7) 1.130 (28.7) 2.310 (58.7) 1.325 (33.7) 1.130 (28.7) 2.310 (58.7) 1.325 (33.7) H Max 1.670 (42.4) 1.790 (45.5) 1.810 (46.0) 1.880 (47.8) 1.970 (50.0) 2.140 (54.4) 2.250 (57.2) 2.250 (57.2) 2.250 (57.2) Dash No. 02 03 04 05 06 07 08 09 10 TABLE V: CABLE ENTRY K Cable Entry Max Max .545 (13.8) .250 (6.4) .670 (17.0) .375 (9.5) .795 (20.2) .500 (12.7) .920 (23.4) .625 (15.9) 1.045 (26.5) .750 (19.1) 1.170 (29.7) .875 (22.2) 1.295 (32.9) 1.000 (25.4) 1.420 (36.1) 1.125 (28.6) 1.670 (42.4) 1.250 (31.8) Dash No. 02 03 04 05 06 07 08 09 10 TABLE VI: CABLE ENTRY L Cable Range Max Min Max .968 (24.6) .125 (3.2) .250 (6.4) 1.046 (26.6) .250 (6.4) .375 (9.5) 1.156 (29.4) .250 (6.4) .500 (12.7) 1.218 (30.9) .375 (9.5) .625 (15.9) 1.343 (34.1) .500 (12.7) .750 (19.1) 1.468 (37.3) .625 (15.9) .875 (22.2) 1.593 (40.5) .625 (15.9) 1.000 (25.4) 1.718 (43.6) .750 (19.1) 1.125 (28.6) 1.843 (46.8) .875 (22.2) 1.250 (31.8) Printed in U.S.A. © 2005 Glenair, Inc. CAGE Code 06324 GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 40 - Page 11 40 400-002 TAG Ring Backshell ®