M24758-13-03-12

Conduit Systems Basic Part No. Conduit Size Code (See Table I) MS3155 Design Standard Applies M Thread (Ref) J .12 (3.0) Min .06 (1.5) Min A Dia E Dia (Ref) Nut Coupling Holes for .032 Dia Safety Wire (3 Req'd) Body MS3155 Design Standard Applies M Thread (Ref) A Dia Nut Coupling © 6/1999 Glenair, Inc. M24758/13 Adapter for Connectors with MS3155 Accessory Interface M24758/13- 16- 08- 01- A Material Designator: A = Aluminum B = Brass C = CRES 316 Style Designator Connector Dash Number (See Table II) L Y K Dia C Thread Straight Knurl (Medium Coarse) (3 Places) Straight Knurl (Medium Coarse) STYLE 02 SAME AS STYLE 01 EXCEPT Y DIMENSION IS LESS THAN J. STYLE 02 IS USED WHEN THE EXTRA WORKING ROOM PROVIDED BY DIMENSION J OF STYLE 01 IS NOT A REQUIREMENT. STYLE 01 FOR USE WHEN E DIAMETER IS GREATER THAN K DIAMETER .38 (9.7) ±.03 (.8) .25 (6.4) E Dia (Ref) K Dia N Dia C Thread .25 (6.4) Straight Knurl (Medium Coarse) (2 Places) Holes for .032 Dia Safety Wire (3 Req'd) STYLE 03 FOR USE WHEN E DIAMETER IS EQUAL TO OR LESS THAN K DIAMETER CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 70 M24758/13 Adapter for Connectors with MS3155 Accessory Interface TABLE I Conduit Size Code 02 03 04 05 06 08 10 12 16 20 24 C Thread (Class 2A) 0.438 - 28 UNEF 0.563 - 24 UNEF 0.688 - 24 UNEF 0.813 - 20 UNEF 0.938 - 20 UNEF 1.250 - 18 UNEF 1.563 - 18 UNEF 1.875 - 16 UN 2.375 - 16 UN 2.875 - 16 UN 3.375 - 16 UN ±.02 .210 .250 .250 .310 .310 .370 .370 .430 .430 .430 .430 L (.5) (5.3) (6.4) (6.4) (7.9) (7.9) (9.4) (9.4) (10.9) (10.9) (10.9) (10.9) K Dia Min. .250 (6.4) .370 (9.4) .500 (12.7) .620 (15.7) .750 (19.1) 1.000 (25.4) 1.250 (31.8) 1.500 (38.1) 2.000 (50.8) 2.500 (63.5) 3.000 (76.2) N Dia ±.02 (.5) .687 (17.4) .812 (20.6) .937 (23.8) 1.062 (27.0) 1.187 (30.1) 1.500 (38.1) 1.812 (46.0) 2.125 (54.0) 2.625 (66.7) 3.125 (79.4) 3.625 (92.1) TABLE II (Connector Dash Numbers & Fitting Dimensions) NAS 1599 & MIL-CMIL-CConn. MIL-C-83723 MIL-C-5015 81703 (Series (MS3400 (Navy) 26482 Dash 1 & 3) Series) (Series 3) (Series 2) No. 03 03 08 8SL 08 08 10 10S, 10SL 10 10 12 12, 12S 07 12 12 14 14, 14S 12 13 14 16 16, 16S 19 16 16 18 18 27 18 18 20 20 37 20 20 22 22 22 22 24 24 24 24 28 28 32 32 36 36 40 40 44 44 48 48 61 61 A Dia. Max. .669 (17.0) .617 (15.7) .734 (18.6) .858 (21.8) .984 (25.0) 1.112 (28.2) 1.218 (30.9) 1.345 (34.2) 1.468 (37.3) 1.593 (40.5) 1.969 (50.0) 2.219 (56.4) 2.469 (62.7) 2.719 (69.1) 2.969 (75.4) 3.219 (81.8) 1.653 (42.0) M Thread (Class 2B) (Ref.) (Note 3) 0.563 - 24 UNEF 0.500 - 20 UNF 0.625 - 24 UNEF 0.750 - 20 UNEF 0.875 - 20 UNEF 1.000 - 20 UNEF 1.062 - 18 UNEF 1.188 - 18 UNEF 1.312 - 18 UNEF 1.438 - 18 UNEF 1.750 - 18 UNEF 2.000 - 18 UNS 2.250 - 16 UN 2.500 - 16 UN 2.750 - 16 UN 3.000 - 16 UN 1.500 - 18 UNEF E Dia. (Ref) Note 3 .270 (6.9) .270 (6.9) .375 (9.5) .511 (13.0) .585 (14.9) .710 (18.0) .789 (20.0) .914 (23.2) 1.039 (26.4) 1.154 (29.3) 1.389 (35.3) 1.635 (41.5) 1.850 (47.0) 2.065 (52.5) 2.320 (58.9) 2.570 (65.3) 1.194 (30.3) J Y (Style 01) (Style 02) ±.03 (.8) ±.03 (.8) 1.060 (26.9) .620 (15.7) 1.060 (26.9) .620 (15.7) 1.060 (26.9) .690 (17.5) 1.060 (26.9) .690 (17.5) 1.060 (26.9) .750 (19.1) 1.060 (26.9) .750 (19.1) 1.120 (28.4) .750 (19.1) 1.380 (35.1) .810 (20.6) 1.830 (46.5) .810 (20.6) 1.830 (46.5) .810 (20.6) 2.300 (58.4) .880 (22.4) 2.550 (64.8) .880 (22.4) 2.800 (71.1) .880 (22.4) 3.050 (77.5) .940 (23.9) 3.550 (90.2) .940 (23.9) 3.620 (91.9) .940 (23.9) 1.880 (47.8) .810 (20.6) 1. The M24758/13 adapter couples connectors listed in Table I to M24758/2, M24758/3 or M24758/4 conduit fittings. 2. The coupling nut end of this adapter shall conform to Military Standard MS3155 (Navy), "Connector, electric, rear accessory design standard". MS3155 takes precedence over this specification. 3. The E diameter and M-thread of this drawing are the same as the E diameter and M-thread of MS3155, and are included for reference purposes. 4. Metric dimensions (mm) are indicated in parentheses. 5. For complete dimensions see applicable Military Specification. © 6/1999 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 71 Conduit Systems