M28840-3JW

M28840/3 Strain Relief Glenair Connector Designator G MIL-C-28840 M28840/3 J W Basic Part No. Designator Material and Finish Designator W = Aluminum, Cadmium Olive Drab over Electroless Nickel A Thread .228 (5.79) Ref. E Wire Holes (3 Equally Spaced) C G Telescoping Screw and Lockwasher Cable Entry F TABLE I Shell Desig- Size nator Ref. A 11 B 13 C 15 D 17 E 19 F 23 G 25 H 29 J 33 A Thread Class 2B .750 - 20 UNEF .875 - 20 UNEF 1.000 - 20 UNEF 1.125 - 18 UNEF 1.250 - 18 UNEF 1.438 - 18 UNEF 1.562 - 18 UNEF 1.875 - 16 UN 2.062 - 16 UNS C Max 1.028 (26.1) 1.141 (29.0) 1.263 (32.1) 1.387 (35.2) 1.513 (38.4) 1.703 (43.3) 1.825 (46.4) 2.143 (54.4) 2.329 (59.2) E Max 1.650 (41.9) 1.650 (41.9) 1.765 (44.8) 1.874 (47.6) 1.918 (48.7) 1.962 (49.8) 2.006 (51.0) 2.301 (58.4) 2.389 (60.7) F Max .903 (22.9) .977 (24.8) 1.151 (29.2) 1.281 (32.5) 1.406 (35.7) 1.576 (40.0) 1.666 (42.3) 2.046 (52.0) 2.209 (56.1) G Max .929 (23.6) .929 (23.6) 1.056 (26.8) 1.233 (31.3) 1.296 (32.9) 1.358 (34.5) 1.420 (36.1) 1.634 (41.5) 1.859 (47.2) Cable Entry Min Max .177 (4.5) .286 (7.3) .177 (4.5) .286 (7.3) .250 (6.4) .416 (10.6) .291 (7.4) .476 (12.1) .348 (8.8) .626 (15.9) .429 (10.9) .831 (21.1) .523 (13.3) .956 (24.3) .643 (16.3) 1.081 (27.5) .704 (17.9) 1.187 (30.1) 1. For complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. 3. Cable Entry is defined as the accomodation entry for the wire bundle or cable. Dimensions are not intended for inspection criteria. © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com 62-7 Strain Reliefs