G1084-18T43U

Global Mixed-mode Technology Inc. G1084-XX 5A Low-Dropout Linear Regulator Features Available in 1.5V, 1.8V, 2.5V, 3.3V version TO-252,TO-263 package Internal short circuit current limiting Internal over temperature protection Output current 5A General Description The G1084-XX is a low dropout linear regulator with a dropout of 1.3V at 5A of load current. It is available in three fixed voltages: 1.5V, 1.8V, 2.5V and 3.3V. Refer to the G1084 for the adjustable version. The G1084-XX provides over temperature and over current protection circuits to prevent it from being damaged by abnormal operating conditions. The G1084-XX is available in TO-252 and TO-263 packages. A minimum of 220µF tantalum electrolytic capacitor is required at the output to improve the transient response and stability. Applications Post regulation for switching DC/DC converter High efficiency linear regulator Battery powered instrumentation Motherboard Ordering Information ORDER NUMBER G1084-15T43U G1084-18T43U G1084-25T43U G1084-33T43U G1084-15T53U G1084-18T53U G1084-25T53U G1084-33T53U ORDER NUMBER MARKING (Pb free) G1084-15T43Uf G1084-18T43Uf G1084-25T43Uf G1084-33T43Uf G1084-15T53Uf G1084-18T53Uf G1084-25T53Uf G1084-33T53Uf G1084-15 G1084-18 G1084-25 G1084-33 G1084-15 G1084-18 G1084-25 G1084-33 TEMP. RANGE -40°C to +85°C -40°C to +85°C -40°C to +85°C -40°C to +85°C -40°C to +85°C -40°C to +85°C -40°C to +85°C -40°C to +85°C PACKAGE TO-252 TO-252 TO-252 TO-252 TO-263 TO-263 TO-263 TO-263 1 GND GND GND GND GND GND GND GND PIN OPTION 2 VOUT VOUT VOUT VOUT VOUT VOUT VOUT VOUT 3 VIN VIN VIN VIN VIN VIN VIN VIN * For other package types and pin options, please contact us at sales@gmt.com.tw Order Number Identification GXXXX-XX XX X X Packing Type Pin Option Package Type Voltage Part Number PACKAGE TYPE T4: TO-252 T5: TO-263 3: PIN OPTION 1 GND 2 VOUT 3 VIN PACKING U: Tape & Reel Package Type Typical Application [Note 4]: Type of COUT G1084-XX VIN VIN GND VOUT IO VOUT Top View C1 220µF COUT 220µF 1 3 2 TO-252、 TO-263 Ver: 0.6 Preliminary Apr 27, 2006 TEL: 886-3-5788833 http://www.gmt.com.tw 1 Global Mixed-mode Technology Inc. Absolute Maximum Ratings (Note 1) Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8V Power Dissipation Internally Limited (Note 2) Maximum Junction Temperature . . . . . . . . . . . . . . .150°C Storage Temperature Range . . . . .-65°C ≤ TJ ≤+150°C Reflow Temperature (soldering, 10sec) . . . . . . 260°C Thermal Resistance Junction to Ambient TO-252(1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95°C/W TO-263(1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92°C/W Thermal Resistance Junction to Case TO-252 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8°C/W TO-263 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..6°C/W ESD Rating (Human Body Model) . . . . . . . . . . . . .2kV Note (1): See Recommended Minimum Footprint G1084-XX Operating Conditions (Note 1) Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . .2.2V~7V Temperature Range . . . . . . . . . . . . . -40°C ≤ TA ≤85°C Electrical Characteristics VIN = 5V, CIN = COUT = 220µF, TA = TJ = 25°C unless otherwise specified. (Note3) PARAMETER Output Voltage Line Regulation Load Regulation CONDITION 10mA < IOUT < 5A (VOUT + 0.7V) < VIN < 5.5V, IOUT = 10mA G1084-18 VIN = 3.8V, 10mA < IOUT < 5A G1084-25 VIN = 5V, 10mA < IOUT < 5A G1084-33 VIN = 5V, 10mA < IOUT < 5A G1084-18 ΔVOUT = 2%, IOUT = 5A G1084-25 ΔVOUT = 2%, IOUT = 5A G1084-33 ΔVOUT = 2%, IOUT = 5A (VIN - VOUT) = 2V G1084-18 VIN = 5V G1084-25 VIN = 5V G1084-33 VIN = 5V f = 120Hz, COUT = 10µF Tantalum, (VIN - VOUT) = 3V, IOUT = 1A Junction Temperature MIN -2% ------------------------- TYP VO 0.1 1 1.6 1.3 1.1 5.5 1 1.7 2.1 2.4 50 150 MAX 2% ------------------------- UNIT V % % Dropout Voltage Current Limit Short Circuit Current Quiescent Current Ripple Rejection Thermal Shutdown V A A mA dB °C Note 1: Absolute Maximum Ratings are limits beyond which damage to the device may occur. Operating Conditions are conditions under which the device functions but the specifications might not be guaranteed. For guaranteed specifications and test conditions see the Electrical Characteristics. Note2: The maximum power dissipation is a function of the maximum junction temperature, TJmax ; total thermal resistance, θJA, and ambient temperature TA. The maximum allowable power dissipation at any ambient temperature is Tjmax-TA / θJA. If this dissipation is exceeded, the die temperature will rise above 150°C and IC will go into thermal shutdown. Note3: Low duty pulse techniques are used during test to maintain junction temperature as close to ambient as possible. Note4: The type of output capacitor should be tantalum or aluminum. Definitions Dropout Voltage The input/output Voltage differential at which the regulator output no longer maintains regulation against further reductions in input voltage. Measured when the output drops 2% below its nominal value. Dropout voltage is affected by junction temperature, load current and minimum input supply requirements. Line Regulation The change in output voltage for a change in input voltage. The measurement is made under conditions of low dissipation or by using pulse techniques such that average chip temperature is not significantly affected. Load Regulation The change in output voltage for a change in load current at constant chip temperature. The measurement is made under conditions of low dissipation or by using pulse techniques such that average chip temperature is not significantly affected. Maximum Power Dissipation The maximum total device dissipation for which the regulator will operate within specifications. Quiescent Bias Current Current which is used to operate the regulator chip and is not delivered to the load. Ver: 0.6 Preliminary Apr 27, 2006 TEL: 886-3-5788833 http://www.gmt.com.tw 2 Global Mixed-mode Technology Inc. Typical Performance Characteristics VIN-VOUT = 3V, CIN = 220µF, COUT = 220µF, TA=25°C, unless otherwise noted. Line Transient Response G1084-XX Load Transient Response Short Circuit Current 70 60 Ripple Rejection (dB) Ripple Rejection IL=1A 50 40 IL=2A 30 20 10 0 10 IL=3A 100 1000 10000 100000 1000000 Frequency (Hz) G1084-33 Overcurrent Protection Characteristics G1084 Start-up Ver: 0.6 Preliminary Apr 27, 2006 TEL: 886-3-5788833 http://www.gmt.com.tw 3 Global Mixed-mode Technology Inc. Typical Performance Characteristics (continued) G1084-18 Overcurrent Protection Characteristics G1084-XX G1084-18 Start-up G1084 Max. Power Dissipation vs. PCB Top Copper Area 4.5 4 Max. Dissipation Power (W) Max. Dissipation Power (W) G1084 Max. Power Dissipation vs. TAMB 4.5 4 3.5 3 A=2.0 Unit : in2 A=0.5 A=1.0 A=1.5 3.5 3 2.5 2 1.5 1 0.5 0 0.5 1.5 2.5 3.5 PCB Top Copper Area (in2) 4.5 2.5 2 1.5 1 0.5 0 25 35 45 55 65 75 85 TAMB (°C) A=2.5 A=3.0 A=3.5 A=4.0 A=4.5 A=5.0 G1084-18 Quiescent Current vs. Temperature 3.0 IL=10mA Quiescent Current (mA) G1084-18 Dropout Voltage vs. IL 2.0 1.8 Dropout Voltage (V) 2.5 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 1 1.5 2 TA=-25°C TA=25°C TA=85°C 2.0 1.5 V IN=4V 1.0 -25 -15 -5 5 15 25 35 45 55 65 75 85 Temperature ( °C) V IN=5V 2.5 3 3.5 IL ( A) 4 4.5 5 Ver: 0.6 Preliminary Apr 27, 2006 TEL: 886-3-5788833 http://www.gmt.com.tw 4 Global Mixed-mode Technology Inc. Typical Performance Characteristics (continued) G1084-XX G1084-18 Output Voltage vs. IL G1084-18 Output Voltage vs. Temperature 1.825 IL=10mA 1.820 Output Voltage (V) Output Voltage (V) 1.824 1.814 V IN=5V 1.804 1.794 V IN=4V 1.784 1.774 1.764 TA =25°C 1.815 1.810 V IN=4V 1.805 V IN=5V 1.800 5 15 25 35 45 55 65 75 85 Temperature ( °C) 0 0.5 1 1.5 2 2.5 3 IL (A) 3.5 4 4.5 5 G1084-33 Quiescent Current vs. Temperature 4.0 1400 1200 Quiescent Current (mA) Dropout Voltage (mV) G1084-33 Dropout Voltage vs. I L 3.5 1000 800 600 400 200 0 1.0 TA =-25°C TA =25°C TA =85°C 3.0 V IN=6V 2.5 V IN=5V 2.0 -25 -15 -5 5 15 25 35 45 55 65 75 85 Temperature (°C) 1.5 2.0 2.5 3.0 3.5 IL ( A) 4.0 4.5 5.0 G1084-33 Output Voltage vs. Temperature 3.334 3.334 G1084-33 Output Voltage vs. IL 3.314 Output Voltage (V) Output Voltage (V) V IN=6V 3.314 TA =25°C V IN=6V 3.294 3.294 3.274 V IN=5V 3.254 IL=200mA 3.234 -25 -5 15 35 55 75 Temperature (°C) 3.274 V IN=5V 3.254 3.234 0 1 2 IL (A) 3 4 5 Ver: 0.6 Preliminary Apr 27, 2006 TEL: 886-3-5788833 http://www.gmt.com.tw 5 Global Mixed-mode Technology Inc. Typical Performance Characteristics (continued) G1084-25 Quiescent Current vs. Temperature 3.50 1800 1600 3.00 Quiescent Current (mA) G1084-XX G1084-25 Dropout Voltage vs. IL 1400 V IN=6V Dropout Voltage (mV) 1200 1000 800 600 400 200 TA =-25°C TA =25°C TA =85°C 2.50 2.00 V IN=5V 1.50 1.00 -25 -15 -5 5 15 25 35 45 55 65 75 85 Temperature ( °C) 0 1 2 3 IL (A) 4 5 G1084-25-Output Voltage vs. Temperature 2.59 2.57 Output Voltage (V) Output Voltage (V) 2.55 2.53 2.51 2.49 IL=10mA 2.47 2.45 -25 V IN=4V V IN=5V 2.55 2.54 2.53 2.52 2.51 2.5 2.49 2.48 2.47 2.46 2.45 -5 15 35 55 Temperature ( °C) 75 0 G1084-25 Output Voltage vs. IL TA=25°C V IN=4V V IN=5V 1 2 IL (A) 3 4 5 Recommend Minimum Footprint TO-252 TO-263 Ver: 0.6 Preliminary Apr 27, 2006 TEL: 886-3-5788833 http://www.gmt.com.tw 6 Global Mixed-mode Technology Inc. Package Information E G1084-XX A F E1 E1 L1 D H L2 θ b e1 e A1 L3 C TO-252 (T4) Package SYMBOL A A1 b C D E E1 e e1 F L1 L2 L3 H MILLIMETER MIN. 2.19 0.89 0.64 0.46 5.97 6.35 5.21 2.26BSC 3.96 0.46 0.89 0.64 2.40 9.40 0° 5.18 0.58 2.03 1.02 2.80 10.40 4° 0.156 0.018 0.035 0.025 0.095 0.370 0° INCH MAX. 2.38 1.27 0.89 0.58 6.22 6.73 5.46 MIN. 0.086 0.035 0.025 0.018 0.235 0.250 0.205 0.09BSC MAX. 0.094 0.050 0.035 0.023 0.245 0.265 0.215 0.204 0.023 0.080 0.040 0.110 0.410 4° θ Ver: 0.6 Preliminary Apr 27, 2006 TEL: 886-3-5788833 http://www.gmt.com.tw 7 Global Mixed-mode Technology Inc. G1084-XX A A1 E L3 D H C L1 e L2 e1 b b1 A2 L TO-263 (T5) Package SYMBOL A A1 A2 b b1 C D E e e1 H L L1 L2 L3 MILLIMETER MIN 4.30 1.22 2.45 0.69 1.22 0.36 8.64 9.70 2.29 4.83 14.60 4.70 1.20 2.24 1.40MAX INCH MAX 4.70 1.32 2.69 0.94 1.40 0.56 9.652 10.54 2.79 5.33 15.78 5.84 1.778 2.84 MIN 0.169 0.048 0.104 0.027 0.048 0.014 0.340 0.382 0.090 0.190 0.575 0.185 0.047 0.088 0.055MAX MAX 0.185 0.055 0.106 0.037 0.055 0.022 0.380 0.415 0.110 0.210 0.625 0.230 0.070 0.111 Taping Specification PACKAGE TO-252 TO-263 Feed Direction TO-252 Package Orientation Feed Direction TO-263 Package Orientation Q’TY/REEL 2,500 ea 800 ea GMT Inc. does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and GMT Inc. reserves the right at any time without notice to change said circuitry and specifications. Ver: 0.6 Preliminary Apr 27, 2006 TEL: 886-3-5788833 http://www.gmt.com.tw 8