G1117TD3B

Global Mixed-mode Technology Inc. G1117 1A Adjustable Low-Dropout Linear Regulator Features Available in adjust version Space saving TO-252, SOT-223 and TO-92 package Internal short circuit current limiting Internal over temperature protection Output current in excess of 1A Output current in excess of 100mA with TO-92 package General Description The G1117 is a low dropout linear regulator with a dropout of 1.2V at 800mA of load current and 1.3V at 1A of load current. It is available in an adjustable version, which can set the output from 1.25V to 5V with only two external resistors. The G1117 provides over temperature and over current protection circuits to prevent it from being damaged by abnormal operating conditions. The G1117 is available in TO-252, SOT-223 and TO-92 packages. A minimum of 10μF tantalum electrolytic capacitor is required at the output to improve the transient response and stability. Applications Post regulation for switching DC/DC converter High efficiency linear regulator Battery charger Battery powered instrumentation Motherboard Ordering Information ORDER NUMBER G1117T43U G1117T63U ----- ORDER NUMBER (Pb free) G1117T43Uf G1117T63Uf G1117TD3B MARKING G1117 G1117 G1117 TEMP. RANGE -40°C~85°C -40°C~85°C -40°C~85°C PACKAGE TO-252 SOT-223 TO-92 1 GND/ADJ GND/ADJ GND/ADJ PIN OPTION 2 VOUT VOUT VOUT 3 VIN VIN VIN * For other package types and pin options, please contact us at sales@gmt.com.tw Order Number Identification GXXXX XX X X Packing Type Pin Option Package Type Part Number PACKAGE TYPE T4:TO-252 T6: SOT-223 TD: TO-92 PIN OPTION 1 3: GND/ADJ 2 VOUT 3 VIN PACKING U: Tape & Reel B: Bag Package Type Typical Application [Note 4]: Type of COUT IO Top View Top View Top View VIN VIN G1117 VOUT GND/ADJ VOUT C1 1µF R1 R2 COUT 10µF 1 2 3 1 2 3 TO-252 SOT-223 1 2 3 TO-92 Ver: 1.9 Mar 07, 2007 TEL: 886-3-5788833 http://www.gmt.com.tw 1 Global Mixed-mode Technology Inc. Absolute Maximum Ratings (Note 1) Input Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7V Power Dissipation Internally Limited (Note 2) Maximum Junction Temperature . . . . . . . . . . . . . .150°C Reflow Temperature (soldering, 10sec) . . . . . . 260°C Thermal Resistance Junction to Ambient, (θJA) SOT-223 . . . . . . . . . . . . . . . . . . . . . . . . . . . .116°C/W Thermal Resistance Junction to Case, (θJc) SOT-223 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21°C/W Note (1): See Recommended Minimum Footprint G1117 Operating Conditions (Note 1) (VIN-VADJ) Voltage. . . . . . . . . . . . . . . . . . . . . .2.5V~6.5V Temperature Range. . . . . . . . . . . . . .-40°C ≤ TA ≤85°C Electrical Characteristics Operating Conditions: VIN ≤ 6.5V, TJ = 25°C unless otherwise specified. [Note3] PARAMETER Reference Voltage Line Regulation Load Regulation Dropout Voltage Current Limit Adjust Pin Current Change Minimum Load Current Quiescent Current Ripple Rejection Thermal Regulation Temperature Stability RMS Output Noise (% of VOUT) CONDITIONS VIN - VOUT = 2V, IOUT = 10mA (VOUT + 1.5V) < VIN < 6.5V, IOUT = 10mA (VIN - VOUT) = 2V, 10mA < IOUT < 1A ΔVOUT = 2%, IOUT = 800mA ΔVOUT = 2%, IOUT = 1A (VIN - VOUT) = 2V VIN - VOUT = 2V, 10mA < IOUT < 1A 1.5V < (VIN - VOUT) < 5.25V VIN - VOUT = 2V f = 120Hz, COUT = 10μF Tantalum, (VIN - VOUT) = 3V, IOUT = 800mA TA = 25°C, 30ms pulse VIN = 4V, IO =10mA TA = 25°C, 10Hz < f < 10kHz, ILOAD = 10mA MIN 1.225 --------1000 --10 30 --------------- TYP 1.250 1.32 0.04 1.2 1.3 1200 0.15 --80 50 0.004 0.3 0.007 116 150 10 MAX 1.275 ----1.3 1.4 ------150 --0.02 ----------- UNITS V % % V mA µA mA µA dB %/W % % °C/W °C °C Thermal Resistor Junction-to-Ambient SOT-223; Recommended Minimum Footprint (No heat sink; No air flow) Thermal Shutdown Junction Temperature Thermal Shutdown Hysteresis Note1: Note2: Note3: Note4: Absolute Maximum Ratings are limits beyond which damage to the device may occur. Operating Conditions are conditions under which the device functions but the specifications might not be guaranteed. For guaranteed specifications and test conditions see the Electrical Characteristics. The maximum power dissipation is a function of the maximum junction temperature, TJmax ; total thermal resistance, θJA, and ambient temperature TA. The maximum allowable power dissipation at any ambient temperature is Tjmax-TA / θJA. If this dissipation is exceeded, the die temperature will rise above 150°C and IC will go into thermal shutdown. For the G1117 in SOT-223 package; θJA is 116°C/W (See recommend minimum footprint). Low duty pulse techniques are used during test to maintain junction temperature as close to ambient as possible. The type of output capacitor should be tantalum or aluminum. Ver: 1.9 Mar 07, 2007 TEL: 886-3-5788833 http://www.gmt.com.tw 2 Global Mixed-mode Technology Inc. Definitions Output Voltage The G1117 provides an adjustable output voltage from 1.25V to 5V. With two external resistors. It can be formulated as: VOUT = 1.25V x (1+ IADJ = 80µA (TYP.) Dropout Voltage The input/output Voltage differential at which the regulator output no longer maintains regulation against further reductions in input voltage. Measured when the output drops 2% below its nominal value. Dropout voltage is affected by junction temperature, load current and minimum input supply requirements. Line Regulation The change in output voltage for a change in input R2 R1 G1117 voltage. The measurement is made under conditions of low dissipation or by using pulse techniques such that average chip temperature is not significantly affected. Load Regulation The change in output voltage for a change in load current at constant chip temperature. The measurement is made under conditions of low dissipation or by using pulse techniques such that average chip temperature is not significantly affected. Maximum Power Dissipation The maximum total device dissipation for which the regulator will operate within specifications. Quiescent Bias Current Current which is used to operate the regulator chip and is not delivered to the load. ) + IADJ x R2 Ver: 1.9 Mar 07, 2007 TEL: 886-3-5788833 http://www.gmt.com.tw 3 Global Mixed-mode Technology Inc. Typical Performance Characteristics VIN= 4V, CIN= 10µF, COUT=10µF, TA=25°C, unless otherwise noted. Line transient G1117 Load Transient Dropout Voltage vs. Load Current 1.06 1.04 Dropout Voutput (V) IADJ Current vs. Load Current 94 91 85°C 1.02 1 0.98 0.96 0.94 0.92 0.9 0 200 85°C IADJ Current (µA) 88 85 82 79 76 73 70 -45°C 25°C 25°C -45°C 400 600 Output Current (mA) 800 1000 0 100 200 300 400 500 600 700 800 Load Current (mA) Ripple Rejection 60 50 Ripple Rejection (dB) Output Voltage Change (%) Temperature Stability 1 IOUT = 100mA (V IN - V OUT ) > 3V IOUT = 800mA 0.5 40 30 20 10 0 10 0 COUT = 10μF IOUT = 0.1A~0.8A -0.5 -1 -40 100 1000 10000 Frequency (Hz) 100000 -20 0 20 40 60 80 100 Temperature (°C) Ver: 1.9 Mar 07, 2007 TEL: 886-3-5788833 http://www.gmt.com.tw 4 Global Mixed-mode Technology Inc. Typical Performance Characteristics (continued) Output Noise 1.60 V IN = 4.5V IOUT = 10mA 1.50 Short-Circuit current (A) 1.40 1.30 1.20 1.10 1.00 0.90 25oC 115oC G1117 Short-Circuit Current -45oC 0.80 1.25 1.75 2.25 2.75 3.25 3.75 4.25 4.75 5.25 (V IN-V OUT ) Diffrential (V) Load Regulation 0.15 Output Voltage Deviation (%) Overcurrent Protection Characteristics 0.1 0.05 0 -0.05 -0.1 -40 -25 -10 5 20 35 50 65 80 95 110 Temperature( °C) SOT-223 Max. Power Dissipation vs. PCB Top Copper Area 3 2.5 2 1.5 1 0.5 0 0.5 1 1.5 2 2.5 3 3.5 4 PCB Top Copper Area (in2) 4.5 5 3 2.5 2 1.5 1 0.5 0 25 SOT-223 Max. Power Dissipation vs. TAMB Unite:in2 A=0.5 A=1.0 A=1.5 A=2.0 A=2.5 A=3.0 A=3.5 A=4.0 A=4.5 A=5.0 Max. Dissipation Power (W) Max. Dissipation Power (W) 45 TAMB ( oC) 65 85 Ver: 1.9 Mar 07, 2007 TEL: 886-3-5788833 http://www.gmt.com.tw 5 Global Mixed-mode Technology Inc. Recommended Minimum Footprint SOT-223 TO-252 G1117 Ver: 1.9 Mar 07, 2007 TEL: 886-3-5788833 http://www.gmt.com.tw 6 Global Mixed-mode Technology Inc. Package Information D D1 C1 B G1117 A V L b1 L3 L2 e e1 b C L1 A1 E TO-252 (T4) Package SYMBOL A A1 B b b1 C C1 D D1 E e e1 L L1 L2 L3 V MILLIMETERS MIN. 2.190 0.000 0.880 0.500 0.700 0.430 0.430 6.350 5.200 5.400 2.300 TYP 4.500 8.830 2.550 1.400 0.350 3.800 4.700 10.77 2.900 1.780 1.020 4.320 0.177 0.348 0.100 0.055 0.014 0.150 INCHES MAX. 2.400 0.127 1.650 0.880 0.900 0.580 0.580 6.730 5.460 6.220 MIN. 0.086 0.000 0.035 0.020 0.028 0.017 0.017 0.250 0.205 0.213 0.091 TYP MAX. 0.094 0.005 0.065 0.035 0.035 0.023 0.023 0.265 0.215 0.245 0.185 0.424 0.114 0.070 0.040 0.170 Ver: 1.9 Mar 07, 2007 TEL: 886-3-5788833 http://www.gmt.com.tw 7 Global Mixed-mode Technology Inc. A D B1 G1117 α C 13 ° (4X) H E L e e1 L2 13 °(4X) A1 B SOT-223 (T6) Package SYMBOLS A A1 B B1 C D E e e1 H L L2 α 0° MILLIMETERS MIN 1.55 0.02 0.60 2.90 0.24 6.30 3.30 2.30 BSC 4.60 BSC 6.70 0.90 MIN 0.06 BSC 10 ° 0° 7.30 0.264 INCHES MAX 1.80 0.12 0.80 3.10 0.32 6.70 3.70 MIN 0.061 0.0008 0.024 0.114 0.009 0.248 0.130 0.090 BSC 0.181 BSC MAX 0.071 0.0047 0.031 0.122 0.013 0.264 0.146 0.287 0.036 MIN 0.0024 BSC 10 ° Ver: 1.9 Mar 07, 2007 TEL: 886-3-5788833 http://www.gmt.com.tw 8 Global Mixed-mode Technology Inc. G1117 L b E e D C A1 D1 G A TO-92 (TD) Package SYMBOL A A1 b E C L e G D D1 MILLIMETER MIN 3.35 1.0414 0.254 4.34 0.254 14.53 1.143 3.683 4.29 4.34 INCH MAX 3.86 1.55 0.508 4.85 0.508 15.04 1.397 4.191 4.80 4.85 MIN 0.132 0.041 0.010 0.171 0.010 0.572 0.045 0.145 0.169 0.171 MAX 0.152 0.061 0.020 0.191 0.020 0.592 0.055 0.165 0.189 0.191 Package Specification PACKAGE TO-252 SOT-223 TO-92 Q’TY/REEL 2,500 ea 2,500 ea ----- Q’TY/BY BAG --------2,000 ea Feed Direction TO-252 Package Orientation Feed Feed Direction SOT-223 Package Orientation GMT Inc. does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and GMT Inc. reserves the right at any time without notice to change said circuitry and specifications. Ver: 1.9 Mar 07, 2007 TEL: 886-3-5788833 http://www.gmt.com.tw 9