1F1G

1F1G thru 1F7G Glass Passivated Fast Recovery Rectifiers Reverse Voltage 50 to 1000 Volts Forward Current 1.0 Ampere Features Low forward voltage drop High current capability High reliability High surge current capability Mechanical Data Case: Molded plastic R-1 Epoxy: UL 94V-O rate flame retardant Lead: Axial leads, solderable per MIL-STD-202, Method 208 guaranteed Polarity: Color band denotes cathode end High temperature soldering guaranteed: 250oC/10 seconds .375” (9.5mm) lead lengths at 5 lbs., (2.3kg) tension Mounting position: Any Weight: 0.007 ounce, 0.20 gram Maximum Ratings and Electrical Characteristics Ratings at 25oC ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20% Parameter Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current 0.375" (9.5mm) lead length at TA=30oC Peak forward surge current, 8.3 ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum instantaneous forward voltage @ 1.0A Maximum DC reverse current at rated DC blocking voltage @TA=25 C @TA=125oC o Symbols VRRM VRMS V DC I(AV) IFSM VF IR trr CJ TJ TSTG 1F 1G 50 35 50 1F 2G 100 70 100 1F 3G 200 140 200 1F 4G 400 280 400 1.0 1F 5G 600 420 600 1F 6G 800 560 800 1F 7G 1000 700 1000 Units Volts Volts Volts Amp 30.0 1.3 5.0 100 150 12 -55 to +150 -55 to +150 250 500 Amps Volts uA nS pF o Maximum reverse recovery time (Note 1) Typical junction capacitance (Note 2) Operating junction temperature range Storage temperature range C C o Notes: 1. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A 2. Measured at 1 MHz and Applied Reverse Voltage of 4.0 V D.C. 77 RATINGS AND CHARACTERISTIC CURVES 78