SF603

SF601 thru SF609 Reverse Voltage 50 to 1000 Volts Super Fast Rectifiers Forward Current 6.0 Amperes Features Low forward voltage drop High current capability High reliability High surge current capability TJ is 150oC (Max.) and TSTG is 175oC (Max.) with PI glue Mechanical Data Case: Molded plastic DO-201AD Epoxy: UL 94V-O rate flame retardant Lead: Axial leads, solderable per MIL-STD-202, Method 208 guaranteed Polarity: Color band denotes cathode end High temperature soldering guaranteed: 250oC/10 seconds .375” (9.5mm) lead lengths at 5 lbs., (2.3kg) tension Weight: 0.042 ounce, 1.2 grams Maximum Ratings and Electrical Characteristics Ratings at 25oC ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20% Parameter Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current .375" (9.5mm) lead length @TA=55oC Peak forward surge current, 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum instantaneous forward voltage @ 6.0A Maximum DC reverse current at rated DC blocking voltage @ TA=25oC @ TA=100oC Symbols VRRM VRMS V DC I(AV) IFSM VF IR trr CJ TJ TSTG 115 -55 to +125 -55 to +150 0.975 5.0 100 35 60 SF601 50 35 50 SF602 100 70 100 SF603 150 105 150 SF604 200 140 200 SF605 300 210 300 6.0 SF606 400 280 400 SF607 600 420 600 SF608 800 560 800 SF609 1000 700 1000 Units Volts Volts Volts Amps 150.0 1.3 1.7 Amps Volts uA uA nS pF o Maximum reverse recovery time (Note 1) Typical junction capacitance (Note 2) Operating junction temperature range Storage temperature range C C o Notes: 1. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A 2. Measured at 1 MHz and Applied Reverse Voltage of 4.0 V D.C. 291 RATINGS AND CHARACTERISTIC CURVES 292