SK5C0A

SK5C0A Surface Mount Schottky Rectifier Reverse Voltage 200V Forward Current 5A Features • Low forward voltage drop • High junction temperature • Moisture sensitivity: level 1, per J-STD-020 • Plastic package has underwriters laboratory flammability classification 94V-0 • Add suffix 'E' for halogen-free • Halogen-free according to IEC 61249-2-21 definition Package: DO-214AC (SMA) • AEC-Q101 qualified Applications For use in low voltage, high freqency inverters, free wheeling and polarity protection applications. Maximum Ratings (TA = 25°C unless otherwise noted) Parameter Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current Peak Forward Surge Current (8.3 ms single half sine-wave superimposed on rated load) Operating Junction and Storage Temperature Range Electrical Characteristics Parameter IF=5A Maximum DC Reverse Current at Rated DC Blocking Voltage Typical Junction Capacitance SK5C0A Unit VRRM VRMS VDC IF(AV) 200 V 140 V 200 5.0 V IFSM 120 A TJ, TSTG -55 to +150 °C Symbol Value Unit VF 0.85 V IR 30 1000 μA CJ 96 pF Symbol Value Unit RθJA RθJC RθJl 75 38 15 °C/W A (TA = 25°C unless otherwise noted) Test Conditions Maximum Instantaneous Forward Voltage Symbol TA=25°C TA=125°C 4.0 V, 1 MHz Thermal Characteristics Parameter Typical Thermal Resistance (1) Note1: Thermal resistance from junction to lead, mounted on PCB with 8.0×8.0mm copper pads. 1/4 SK5C0A Surface Mount Schottky Rectifier Reverse Voltage 200V Forward Current 5A Ratings and Characteristics Curves (TA = 25°C unless otherwise noted) 120 Peak Forward Surge Current (A) Output Full Wave Rectified Current (A) 5 4 3 2 1 0 0 25 50 75 100 125 150 90 60 30 0 1 Lead temperature (°C) 10 Number of Cycles at 60Hz 100 Figure 2. Maximum Non-Repetitive Peak Forward Surge Current Figure 1. Forward Current Derating Curve Instantaneous Forward Current (A) 100 10 25°C 50°C 75°C 100°C 125°C 150°C 1 0.1 0.01 0 0.2 0.4 0.6 0.8 1.0 1.2 Instantaneous Forward Voltage (V) Figure 3. Typical Instantaneous Forward Characteristics Instantaneous Reverse Current (μA) 1000.00 100.00 10.00 1.00 25°C 50°C 75°C 100°C 125°C 150°C 0.10 0.01 0 10 20 30 40 50 60 70 80 90 Percent of Rated Peak Reverse Voltage (%) Figure 4. Typical Reverse Characteristics 2/4 100 110 SK5C0A Surface Mount Schottky Rectifier Reverse Voltage 200V Forward Current 5A Package Outline Dimensions DO-214AC (SMA) in inches (millimeters) Packing Information 7500 pcs/Reel, 18 Reels/Box, 12mm Tape, 13" Reel Tape & Reel Specification Symbol W E F D0 D1 P0 P1 P2 A0 B0 SMA(mm) 12±0.2 1.75±0.1 5.5±0.05 1.5±0.1 1.50 +0.1/-0 4.0±0.1 4.0±0.1 2.0±0.05 2.65±0.1 5.25±0.1 3/4 SK5C0A Surface Mount Schottky Rectifier Reverse Voltage 200V Forward Current 5A Soldering Parameters Reflow Soldering Sn-Pb Eutectic Assembly Pb-Free Assembly - Temperature Min (Ts min) 100°C 150°C - Temperature Max (Ts max) 150°C 200°C 60 – 120 secs 60 – 180 secs Average ramp up rate (Liquidus) Temp (TL) to peak 3°C/second max 3°C/second max TS(max) to TL - Ramp-up Rate 3°C/second max 3°C/second max 183°C 217°C 60 – 150 seconds 60 – 150 seconds Pre Heat - Time (min to max) (ts) Reflow - Temperature (TL) (Liquidus) - Time (min to max) (ts) Peak Temperature (TP) 240+0/-5 °C 240+0/-5°C Time within 5°C of actual peak Temperature (tp) 10 –30 seconds 20 – 40 seconds Ramp-down Rate 6°C/second max 6°C/second max Time 25°C to peak Temperature (TP) 6 minutes max 8 minutes max 260°C 260°C Do not exceed Wave Soldering Peak Temperature Dipping Time Soldering www.goodarksemi.com 260+0/-5°C 10 seconds 1 time 4/4 Doc.USSK5C0AxSD2.0 Aug. 2022