76STC04

Thru-Hole DIP Switches SERIES 76 and 78 SPDT FEATURES • Raised and Recessed Rocker, and Toggle Actuated Styles • SPDT with a Common Pole, or SPDT with 2 Isolated Circuits • Spring and Ball Contact • Top Tape Seal Option for Most Styles DIP Switches DIMENSIONS: Series 76 Series 76 Raised Rocker .380 ± .010 (9,65 ± 0,25) 1 C1 2 In inches (and millimeters) Toggle-DIP .447 ± .015 (11,35 ± 0,38) TYP. CIRCUITRY: Series 76 SPDT with Common True Form C Switching .380 ± .010 (9,65 ± 0,25) C2 A = .247 ± .010 (6,27 ± 0,25) .295 + .000 –.020 (7,49 –0,51) 1 C1 2 1 C1 2 .020 + .005 –.000 (0,51 + 0,13) A C2 C2 1 C1 .050 ± .005 (1,27 ± 0,13) .020 ± .002 (0,51 ± 0,05) TYP. .090 ± .005 (2,29 ± 0,13) TYP. .100 ± .005 (2,54 ± 0,13) TYP. .156 + .015 –.010 (3,96 + 0,38 –0,25) Recessed Rocker 1 C1 .180 ± .010 (4,57 ± 0,25) C L C L .012 ± .001 (0,30 ± 0,03) .300 + .030 –.000 (7,62 + 0,76) .247 ± .010 (6,27 ± 0,25) DIMENSIONS: Series 78 Series 78 Slide 0.380 ± .005 (9,65 ± 0,13) 1 2 3 4 5 In inches (and millimeters) CIRCUITRY: Series 78 SPDT, 2 Circuits (No Commons) Dot on cover indicates active terminal when slide is on that side of switch. Contact is made with terminal on opposite side. .070 (1,78) REF. .295 + .000 –.020 (7,49 –0,51) DIM. A SEE CHART .100 ± .002 (2,54 ± 0,05) 1 1 .020 ± .002 (0,51 ± 0,05) .020 ± .002 (0,51 ± 0,05) TYP. .090 ± .005 (2,29 ± 0,13) TYP. .100 ± .005 (2,54 ± 0,13) TYP. CC LL A .156 + .015 –.010 (3,96 + 0,38 –0,25) TYP. A = .245 + .000 –.020 (6,22 + 0,51) .180 ± .010 (4,57 ± 0,25) .012 ± .001 (0,30 ± 0,03) .300 + .030 –.000 (7,62 + 0,76) .050 ± .005 (1,27 ± 0,13) TYP. C L C L To create common poles, tie together 2 adjoining terminals on 1 (either) side of switch. ORDERING INFORMATION Circuitry SPDT Form C SPDT 2 Circuits Positions Length Inches 2 3 4 1 2 3 4 5 6 0.380" 0.580" 0.780" 0.280" 0.480" 0.680" 0.880" 1.080" 1.280" Length Metric 9,7mm 14,7mm 19,8mm 7,1mm 12,2mm 17,3mm 22,4mm 27,4mm 32.5mm No./ Tube 27 18 13 35 21 15 12 9 8 Raised Type* 76SC02 76SC03 76SC04 78J01 78J02 78J03 78J04 78J05 78J06 Recessed Rockers* 76RSC02 76RSC03 76RSC04 — — — — — ToggleDIP* 76STC02 76STC03 76STC04 — — — — — ADDITIONAL INFORMATION For Specifications, see page B-16. For Options and Accessories, see pages B-20 and B-21. Available from your local Grayhill Distributor. For prices and discounts, contact a local Sales Office, an authorized local Distributor or Grayhill. *To order top seal versions, add "S" to the Grayhill part number. Not available on Toggle-DIP. G rayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com B-14 Thru-Hole DIP Switches SPECIFICATIONS: Standard and Military Qualified Styles Ratings Mechanical Life: Operations per switch position Make-and-break Current Rating: Operations per switch position at these resistive loads 1 mA, 5 Vdc; 50 mA, 30 Vdc; or 150 mA, 30 Vdc: 10 mA, 30 Vdc; or 10 mA, 50 mVdc: 10 mA, 50 mVdc; or 25 mA, 24 Vdc; or 100 mA, 6 Vdc: Contact Resistance: Initially: After life, at 10 mA, 50 mVdc, open circuit: Insulation Resistance: Minimum, at 100 Vdc between adjacent closed contacts and also across open switch contacts Initially (Mohms): After life (Mohms): Dielectric Strength: Minimum voltage (AC, RMS) measured between adjacent closed contacts and also across open switch contacts. lnitially: After life: Current Carry Rating: Maximum rise of 20°C Switch Capacitance: At 1 megahertz Operating Temperature Range: Storage Temperature Range: 76 20,000 78 20,000 90B 5,000 10,000 — — ≤ 30 mΩ ≤ 100 mΩ 10,000 — — ≤ 30 mΩ ≤ 100 mΩ — 2,000 2,000 DIP Switches ≤ 20 mΩ ≤ 100 mΩ 5,000 1,000 5,000 1,000 5,000 1,000 750 V 500 V 5A 2 pF -40°C to + 85°C -55°C to + 85°C 750 V 500 V 4A 2 pF -40°C to + 85°C -55°C to + 85°C 500 V 500 V 3A 2 pF -40°C to + 85°C -55°C to + 85°C Mechanical Ratings Vibration Resistance: Per Method 204, Test Condition B, 1 mS opening (10 mS allowed) Mechanical Shock: Per Method 213, Test Condition A. 1 mS opening (10 mS allowed) Thermal Shock Resistance: Per specification; no failures; passes contact resistance. Terminal Strength: Per specification Thermal Aging: 1,000 hours at 85°C; no failures. Soldering Information Series 90 MIDIP® and Series 76 recessed rocker (76RSB style) sealed switches have been tested to EIA Standard RS-448-2. Similar performance can be expected from other sealed Series 76 and 78 DIP switches. Solderability: Per MIL-STD-202, Method 208 Resistance to Soldering Heat: 76RSB: Passes EIA Standard using two, four, and six second soldering time. 90: Per MIL-S-83504, six second test. Fluxing: Per EIA RS-448-2 with flux touching switch body. Cleaning: 76RSB, 90: Passes immersion test using water/detergent. Acceptable solutions include 1-1-1 trichlorethane, freon, (TF, TE, or TMS), isopropyl alcohol, detergent (140°F maximum). Terpene acceptable for Series 90 only. Solutions which are not recommended include acetone, methylene chloride, freon TMC. Materials and Finishes Shorting Member (Ball): Brass, gold-plated 10 microinches minimum over nickel barrier. Base Contacts: Copper alloy, gold-plated 10 microinches minimum over nickel barrier. Terminals: Copper alloy, solder-plated over nickel barrier. Non-Conductive Parts: Thermoplastic (UL94V-O) Potting Material: Epoxy, 76,78 only. Protective Cover: 76,78, only-Polycarbonate. Environmental Ratings Meets all requirements of MIL- S-83504. Where Grayhill performance is superior, the MIL spec is listed in parentheses. Moisture Resistance: Per specification, Method 106. Tape and Reel Packaging Tape Seal: 76, 78: Polyester film 90: Polyimide film or foil Tape Seal Integrity: Passes gross leak test using 125°C flourinert for 20 seconds minimum. Reference MIL-STD-202, Method 112. G rayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com B-16