GI9T18

Pb Free Plating Product ISSUED DATE :2005/04/06 REVISED DATE : GI9T 18 Description N-CHANNEL ENHANCEMENT MODE POWER MOSFET BVDSS RDS(ON) ID 20V 14m 38A The GI9T18 provide the designer with the best combination of fast switching, ruggedized device design, low on-resistance and cost-effectiveness. *Capable of 2.5V gate drive *Low Gate Charge Features Package Dimensions TO-251 REF. A B C D E F Millimeter Min. Max. 6.40 6.80 5.20 5.50 6.80 7.20 7.20 7.80 2.30 REF. 0.60 0.90 REF. G H J K L M Millimeter Min. Max. 0.50 0.70 2.20 2.40 0.45 0.55 0.45 0.60 0.90 1.50 5.40 5.80 Absolute Maximum Ratings Parameter Drain-Source Voltage Gate-Source Voltage Continuous Drain Current, VGS@4.5V Continuous Drain Current, VGS@4.5V Pulsed Drain Current 1 Symbol VDS VGS ID @TC=25 : ID @TC=100 : IDM PD @TC=25 : Tj, Tstg Ratings 20 ±12 38 24 140 31.3 0.25 -55 ~ +150 Unit V V A A A W W/ : : Total Power Dissipation Linear Derating Factor Operating Junction and Storage Temperature Range Thermal Data Parameter Thermal Resistance Junction-case Thermal Resistance Junction-ambient Max. Max. Symbol Rthj-c Rthj-a Value 4 110 Unit : /W : /W GI9T18 Page: 1/4 ISSUED DATE :2005/04/06 REVISED DATE : Electrical Characteristics (Tj = 25 : unless otherwise specified) Parameter Drain-Source Breakdown Voltage Breakdown Voltage Temperature Coefficient Symbol BVDSS BVDSS / Tj Min. 20 0.5 - Typ. 0.1 33 16 3 9 12 80 22 12 1115 280 220 1.54 Max. 1.5 ±100 1 25 14 28 25 1790 - Unit V V/ : V S nA uA uA m Test Conditions VGS=0, ID=250uA Reference to 25 : , ID=1mA VDS=VGS, ID=250uA VDS=5V, ID=18A VGS= ±12V VDS=20V, VGS=0 VDS=12V, VGS=0 VGS=4.5V, ID=18A VGS=2.5V, ID=9A ID=18A VDS=16V VGS=4.5V VDS=10V ID=18A VGS=5V RG=3.3 RD=0.56 VGS=0V VDS=20V f=1.0MHz f=1.0MHz Gate Threshold Voltage Forward Transconductance Gate-Source Leakage Current Drain-Source Leakage Current(Tj=25 : ) Drain-Source Leakage Current(Tj=150 : ) VGS(th) gfs IGSS IDSS Static Drain-Source On-Resistance Total Gate Charge2 Gate-Source Charge Gate-Drain (“Miller”) Change Turn-on Delay Time2 Rise Time Turn-off Delay Time Fall Time Input Capacitance Output Capacitance Reverse Transfer Capacitance Gate Resistance RDS(ON) Qg Qgs Qgd Td(on) Tr Td(off) Tf Ciss Coss Crss Rg nC ns pF Source-Drain Diode Parameter Forward On Voltage 2 2 Symbol VSD Trr Qrr Min. - Typ. 19 11 Max. 1.3 - Unit V ns nC Test Conditions IS=18A, VGS=0V IS=18A, VGS=0V dI/dt=100A/ s Reverse Recovery Time Reverse Recovery Charge Notes: 1. Pulse width limited by safe operating area. 2. Pulse width 300us, duty cycle 2%. GI9T18 Page: 2/4 ISSUED DATE :2005/04/06 REVISED DATE : Characteristics Curve Fig 1. Typical Output Characteristics Fig 2. Typical Output Characteristics Fig 3. On-Resistance v.s. Gate Voltage Fig 4. Normalized On-Resistance v.s. Junction Temperature Fig 5. Forward Characteristics of Reverse Diode GI9T18 Fig 6. Gate Threshold Voltage v.s. Junction Temperature Page: 3/4 ISSUED DATE :2005/04/06 REVISED DATE : Fig 7. Gate Charge Characteristics Fig 8. Typical Capacitance Characteristics Fig 9. Maximum Safe Operating Area Fig 10. Effective Transient Thermal Impedance Fig 11. Switching Time Waveform Fig 12. Gate Charge Waveform Important Notice: All rights are reserved. Reproduction in whole or in part is prohibited without the prior written approval of GTM. GTM reserves the right to make changes to its products without notice. GTM semiconductor products are not warranted to be suitable for use in life-support Applications, or systems. GTM assumes no liability for any consequence of customer product design, infringement of patents, or application assistance. Head Office And Factory: Taiwan: No. 17-1 Tatung Rd. Fu Kou Hsin-Chu Industrial Park, Hsin-Chu, Taiwan, R. O. C. TEL : 886-3-597-7061 FAX : 886-3-597-9220, 597-0785 China: (201203) No.255, Jang-Jiang Tsai-Lueng RD. , Pu-Dung-Hsin District, Shang-Hai City, China TEL : 86-21-5895-7671 ~ 4 FAX : 86-21-38950165 GI9T18 Page: 4/4