GSC79L24

Pb Free Plating Product CORPORATION GSC79LXX Description NEGATIVE VOLTAGE REGULATOR ISSUED DATE :2006/06/26 REVISED DATE : The GSC79LXX series of fixed-voltage monolithic integrated circuit voltage regulators are designed for a wide range of applications. These applications include on-card regulation for elimination of noise and distribution problems associated with single-point regulation. In addition, they can be used with power-pass elements to make high current voltage regulators. Each of these regulators can deliver up to 100mA of output current. The internal limiting and thermal shutdown features of these regulators make them essentially immune to overload. When used as a replacement for a Zener diode-resistor combination, an effective improvement in output impedance can be obtained together with lower-bias current. Features & Fixed output voltage of -5V, -6V, -8V,-9V, -12V, -15V, -18V, -24V &Internal Short-Circuit Current Limiting &Internal Thermal Overload Protection &No External Components Required Package Dimensions REF. A B C D E F Millimeter Min. Max. 5.80 4.80 3.80 0° 0.40 0.19 6.20 5.00 4.00 8° 0.90 0.25 REF. M H L J K G Millimeter Min. Max. 0.10 0.25 0.35 0.49 1.35 1.75 0.375 REF. 45° 1.27 TYP. Absolute Maximum Ratings Input voltage Parameter GSC79L05 ~ 09 GSC79L12 ~ 18 GSC79L24 Output current Operating junction temperature range Storage temperature range Power Dissipation *When tested in free air condition, without heat sinking. Ratings -30 -35 -40 100 0 ~ 125 -65 ~ 150 750* Unit V V V mA : : mW GSC79LXX Page: 1/5 CORPORATION Electrical Characteristics GSC79L05 (Refer to the test circuits, Tj=0~125 : Symbol VO A-Rank (3%) B-Rank (5%) Min. -4.85 -4.75 41 Typ. -5.0 15 20 40 49 1.7 Max. -5.15 -5.25 150 60 6.0 0.1 1.5 Unit V mV mV mA mA V dB V ISSUED DATE :2006/06/26 REVISED DATE : , Io=40mA, Vin= -10V, Cin=0.33 F, Co=0.1 F unless otherwise specified) (Note1) Test Conditions Vin= -10V, I o=40mA, Tj=25 : -7V Vin - 20V, 1mA I o 40mA Vin= -10V, 1mA I o 70mA (Note2) -7V Vin - 20V, I o=40mA, Tj=25 : Io 100mA, Tj=25 : VO (Line Regulation) VO (Load Regulation) IQ IQ Vn RR VD Vin= -10V, 1mA Vin= -10V, I o=40mA, Tj=25 : Vin= -10V, 1mA -8V 10Hz -8V Vin f Vin Io 40mA - 20V, I o=40mA 100KHz - 18V, I o=40mA, f=120Hz, Tj=25 : I o=100mA, Tj=25 : GSC79L06 (Refer to the test circuits, Tj=0~125 : Symbol VO A-Rank (3%) B-Rank (5%) Min. -5.82 -5.70 40 Typ. -6.0 20 21 44 48 1.7 , Io=40mA, Vin= -11V, Cin=0.33 F, Co=0.1 F unless otherwise specified) (Note1) Max. -6.18 -6.30 150 60 6.0 0.1 1.5 - Unit V mV mV mA mA V dB V Test Conditions Vin= -11V, I o=40mA, Tj=25 : -8V Vin - 20V, 1mA I o 40mA Vin= -11V, 1mA I o 70mA (Note2) -8V Vin - 20V, I o=40mA, Tj=25 : Io 100mA, Tj=25 : VO (Line Regulation) VO (Load Regulation) IQ IQ Vn RR VD Vin= -11V, 1mA Vin= -11V, I o=40mA, Tj=25 : Vin= -11V, 1mA -9V 10Hz -9V Vin f Vin Io 40mA - 20V, I o=40mA 100KHz 19V, I o=40mA, f=120Hz, Tj=25 : I o=100mA, Tj=25 : GSC79L08 (Refer to the test circuits, Tj=0~125 : Symbol VO A-Rank (3%) B-Rank (5%) Min. -7.76 -7.60 37 Typ. -8.0 42 30 54 46 1.7 , Io=40mA, Vin= -14V, Cin=0.33 F, Co=0.1 F unless otherwise specified) (Note1) Max. -8.24 -8.40 175 80 6.0 0.1 1.5 - Unit V mV mV mA mA V dB V Test Conditions Vin= -14V, I o=40mA, Tj=25 : -10.5V Vin - 23V, 1mA I o 40mA Vin= -14V, 1mA I o 70mA (Note2) -10.5V Vin - 23V, I o=40mA, Tj=25 : Io 100mA, Tj=25 : VO (Line Regulation) VO (Load Regulation) IQ IQ Vn RR VD Vin= -14V, 1mA Vin= -14V, I o=40mA, Tj=25 : Vin=-14V, 1mA -11V 10Hz -11V Vin f Vin Io 40mA - 23V, I o=40mA 100KHz - 21V, I o=40mA, f=120Hz, Tj=25 : I o=100mA, Tj=25 : GSC79LXX Page: 2/5 CORPORATION GSC79L09 (Refer to the test circuits, Tj=0~125 : Symbol VO A-Rank (3%) B-Rank (5%) Min. -8.73 -8.55 37 Typ. -9.0 42 30 54 46 1.7 Max. -9.27 -9.45 200 90 6.0 0.1 1.5 Unit V mV mV mA mA V dB V ISSUED DATE :2006/06/26 REVISED DATE : , Io=40mA, Vin= -15V, Cin=0.33 F, Co=0.1 F unless otherwise specified) (Note1) Test Conditions Vin= -15V, I o=40mA, Tj=25 : -11.5V Vin - 24V, 1mA I o 40mA Vin= -15V, 1mA I o 70mA (Note2) -11.5V Vin - 24V, I o=40mA, Tj=25 : Io 100mA, Tj=25 : VO (Line Regulation) VO (Load Regulation) IQ IQ Vn RR VD Vin= -15V, 1mA Vin= -15V, I o=40mA, Tj=25 : Vin= -15V, 1mA -12V 10Hz -12V Vin f Vin Io 40mA -24V, I o=40mA 100KHz -22V, I o=40mA, f=120Hz, Tj=25 : I o=100mA, Tj=25 : GSC79L12 (Refer to the test circuits, Tj=0~125 : Symbol VO A-Rank (3%) B-Rank (5%) Min. -11.64 -11.40 37 Typ. -12.0 50 24 80 42 1.7 , Io=40mA, Vin= -19V, Cin=0.33 F, Co=0.1 F unless otherwise specified) (Note1) Max. -12.36 -12.60 250 100 6.5 0.1 1.5 - Unit V mV mV mA mA V dB V Test Conditions Vin= -19V, I o=40mA, Tj=25 : -14.5V Vin - 27V, 1mA I o 40mA Vin= -19V, 1mA I o 70mA (Note2) -14.5V Vin - 27V, I o=40mA, Tj=25 : Io 100mA, Tj=25 : VO (Line Regulation) VO (Load Regulation) IQ IQ Vn RR VD Vin= -19V, 1mA Vin= -19V, I o=40mA, Tj=25 : Vin= -19V, 1mA -16V 10Hz -15V Vin f Vin Io 40mA -27V, I o=40mA 100KHz -25V, I o=40mA, f=120Hz, Tj=25 : I o=100mA, Tj=25 : GSC79L15 (Refer to the test circuits, Tj=0~125 : Symbol VO A-Rank (3%) B-Rank (5%) Min. -14.55 -14.25 34 Typ. -15.0 65 25 90 39 1.7 , Io=40mA, Vin= -23V, Cin=0.33 F, Co=0.1 F unless otherwise specified) (Note1) Max. -15.45 -15.75 300 150 6.5 0.1 1.5 - Unit V mV mV mA mA V dB V Test Conditions Vin= -23V, I o=40mA, Tj=25 : -17.5V Vin - 30V, 1mA I o 40mA Vin= -23V, 1mA I o 70mA (Note2) -17.5V Vin - 30V, I o=40mA, Tj=25 : Io 100mA, Tj=25 : VO (Line Regulation) VO (Load Regulation) IQ IQ Vn RR VD Vin= -23V, 1mA Vin= -23V, I o=40mA, Tj=25 : Vin= -23V, 1mA -20V 10Hz -18.5V Vin f Vin Io 40mA -30V, I o=40mA 100KHz - 28.5V, I o=40mA, f=120Hz, Tj=25 : I o=100mA, Tj=25 : GSC79LXX Page: 3/5 CORPORATION GSC79L18 (Refer to the test circuits, Tj=0~125 : Symbol VO A-Rank (3%) B-Rank (5%) Min. -17.46 -17.10 33 Typ. -18.0 70 27 150 48 1.7 Max. -18.54 -18.9 300 170 6.5 0.1 1.5 Unit V mV mV mA mA V dB V ISSUED DATE :2006/06/26 REVISED DATE : , Io=40mA, Vin= -27V, Cin=0.33 F, Co=0.1 F unless otherwise specified) (Note1) Test Conditions Vin= -27V, I o=40mA, Tj=25 : -20.5V Vin - 33V, 1mA I o 40mA Vin= -27V, 1mA I o 70mA (Note2) -20.5V Vin - 33V, I o=40mA, Tj=25 : Io 100mA, Tj=25 : VO (Line Regulation) VO (Load Regulation) IQ IQ Vn RR VD Vin= -27V, 1mA Vin= -27V, I o=40mA, Tj=25 : Vin= -27V, 1mA -21V 10Hz -23V Vin f Vin Io 40mA -33V, I o=40mA 100KHz -33V, I o=40mA, f=120Hz, Tj=25 : I o=100mA, Tj=25 : GSC79L24 (Refer to the test circuits, Tj=0~125 : Symbol VO A-Rank (3%) B-Rank (5%) Min. -23.28 -22.80 31 Typ. -24.0 90 40 200 47 , Io=40mA, Vin= -33V, Cin=0.33 F, Co=0.1 F unless otherwise specified) (Note1) Max. -24.72 -25.20 350 200 6.5 0.1 1.5 - Unit V mV mV mA mA V dB Test Conditions Vin= -33V, I o=40mA ,Tj=25 : -27V Vin -38V, 1mA I o 40mA Vin= -33V, 1mA I o 70mA (Note2) -27V Vin -38V, I o=40mA, Tj=25 : Io 100mA, Tj=25 : VO (Line Regulation) VO (Load Regulation) IQ IQ Vn RR Vin= -33V, 1mA Vin= -33V, I o=40mA, Tj=25 : Vin= -33V, 1mA -28V 10Hz -29V Vin f Vin Io 40mA -38V, I o=40mA 100KHz -35V, I o=40mA, f=120Hz, Tj=25 : I o=100mA, Tj=25 : VD 1.7 V N ote1: The Maximum steady state usable output current is dependent on input voltage, heat sinking, lead length of the package and copper of PCB. The data above represent pulse test conditions with junction temperatures specified at the initiation of test. Note2: Power dissipation