GTT2603

Pb Free Plating Product ISSUED DATE :2006/03/28 REVISED DATE : GTT2603 P-CHANNEL ENHANCEMENT MODE POWER MOSFET BVDSS RDS(ON) ID -20V 65m -5.0A The GTT2603 utilized advanced processing techniques to achieve the lowest possible on-resistance, extremely efficient and cost-effectiveness device. The GTT2603 is universally used for all commercial-industrial applications. Description Features *Simple Drive Requirement *Small Package Outline Package Dimensions REF. A A1 A2 c D E E1 Millimeter Min. Max. 1.10 MAX. 0 0.10 0.70 1.00 0.12 REF. 2.70 3.10 2.60 3.00 1.40 1.80 REF. L L1 b e e1 Millimeter Min. Max. 0.45 REF. 0.60 REF. 0° 10° 0.30 0.50 0.95 REF. 1.90 REF. Absolute Maximum Ratings Parameter Drain-Source Voltage Gate-Source Voltage Continuous Drain Current3 3 Continuous Drain Current Pulsed Drain Current1,2 Power Dissipation Linear Derating Factor Symbol VDS VGS ID @TA=25 : ID @TA=70 : IDM PD @TA=25 : Tj, Tstg Symbol Rthj-a Operating Junction and Storage Temperature Range Ratings -20 ±12 -5 -4 -20 2 0.016 -55 ~ +150 Value 62.5 Unit V V A A A W W/ : : Unit : /W Thermal Data Parameter Thermal Resistance Junction-ambient3 Max. 1/4 ISSUED DATE :2006/03/28 REVISED DATE : Electrical Characteristics (Tj = 25 : unless otherwise specified) Parameter Drain-Source Breakdown Voltage Breakdown Voltage Temperature Coefficient Symbol BVDSS BVDSS / Tj Min. -20 -0.5 - Typ. -0.1 9 10.6 2.32 3.68 5.9 3.6 32.4 2.6 740 167 126 Max. -1.2 ±100 -1 -10 53 65 120 250 16 1200 - Unit V V/ : V S nA uA uA Test Conditions VGS=0, ID=-250uA Reference to 25 : , ID=-1mA VDS=VGS, ID=-250uA VDS=-5V, ID=-2.8A VGS= ±12V VDS=-20V, VGS=0 VDS=-16V, VGS=0 VGS=-10V, ID=-4.5A Gate Threshold Voltage Forward Transconductance Gate-Source Leakage Current Drain-Source Leakage Current(Tj=25 : ) Drain-Source Leakage Current(Tj=55 : ) VGS(th) gfs IGSS IDSS Static Drain-Source On-Resistance 2 RDS(ON) - m VGS=-4.5V, ID=-4.2A VGS=-2.5V, ID=-2.0A VGS=-1.8V, ID=-1.0A ID=-4.2A VDS=-16V VGS=-4.5V VDS=-15V ID=-4.2A VGS=-10V RG=6 RD=3.6 VGS=0V VDS=-15V f=1.0MHz Total Gate Charge2 Gate-Source Charge Gate-Drain (“Miller”) Change Turn-on Delay Time2 Rise Time Turn-off Delay Time Fall Time Input Capacitance Output Capacitance Reverse Transfer Capacitance Qg Qgs Qgd Td(on) Tr Td(off) Tf Ciss Coss Crss - nC ns pF Source-Drain Diode Parameter Forward On Voltage 2 Symbol VSD Trr Qrr Min. - Typ. 27.7 22 Max. -1.2 - Unit V ns nC Test Conditions IS=-1.2A, VGS=0V IS=-4.2A, VGS=0V dI/dt=100A/ s Reverse Recovery Time2 Reverse Recovery Charge Notes: 1. Pulse width limited by Max. junction temperature. 2. Pulse width 300us, duty cycle 2%. 3. Surface mounted on 1 in2 copper pad of FR4 board; 156 : /W when mounted on Min. copper pad. 2/4 ISSUED DATE :2006/03/28 REVISED DATE : Characteristics Curve Fig 1. Typical Output Characteristics Fig 2. Typical Output Characteristics Fig 3. On-Resistance v.s. Gate Voltage Fig 4. Normalized On-Resistance v.s. Junction Temperature Fig 5. Forward Characteristics of Reverse Diode Fig 6. Gate Threshold Voltage v.s. Junction Temperature 3/4 ISSUED DATE :2006/03/28 REVISED DATE : Fig 7. Gate Charge Characteristics Fig 8. Typical Capacitance Characteristics Fig 9. Maximum Safe Operating Area Fig 10. Effective Transient Thermal Impedance Fig 11. Switching Time Waveform Fig 12. Gate Charge Waveform Important Notice: All rights are reserved. Reproduction in whole or in part is prohibited without the prior written approval of GTM. GTM reserves the right to make changes to its products without notice. GTM semiconductor products are not warranted to be suitable for use in life-support Applications, or systems. GTM assumes no liability for any consequence of customer product design, infringement of patents, or application assistance. Head Office And Factory: Taiwan: No. 17-1 Tatung Rd. Fu Kou Hsin-Chu Industrial Park, Hsin-Chu, Taiwan, R. O. C. TEL : 886-3-597-7061 FAX : 886-3-597-9220, 597-0785 China: (201203) No.255, Jang-Jiang Tsai-Lueng RD. , Pu-Dung-Hsin District, Shang-Hai City, China TEL : 86-21-5895-7671 ~ 4 FAX : 86-21-38950165 4/4