1U1G

1U1G THRU 1U7G FULTRAFAST EFFICIENT GLASS PASSIVATED JUNCTION RECTIFIER VOLTAGE: 50 TO 1000V CURRENT: 1.0A R-1 FEATURE Molded case feature for auto insertion High current capability Low leakage current High surge capability High temperature soldering guaranteed 250°C /10sec/0.375" lead length at 5 lbs tension Glass Passivated chip MECHANICAL DATA Terminal: Plated axial leads solderable per MIL-STD 202E, method 208C Case: Molded with UL-94 Class V-0 recognized Flame Retardant Epoxy Polarity: color band denotes cathode Mounting position: any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 50HZ, resistive or inductive load rating at 25°C, unless otherwise stated, for capacitive load, derate current by 20%) SYMBOL Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC blocking Voltage Peak Reverse Surge Voltage Maximum Average Forward Rectified C Current 3/8" lead length at Ta =50° Peak Forward Surge Current 8.3ms single Half sine-wave superimposed on rated load Maximum Instantaneous Forward Voltage at rated forward current Maximum DC Reverse Current Ta =25° C at rated DC blocking voltage Ta =125° C Typical Junction Capacitance (Note 1) Maximum Reverse Recovery Time (Note 2) Vrrm Vrms Vdc Vrsm If(av) Ifsm Vf Ir Cj Trr 1U 1G 50 35 50 50 1U 2G 100 70 100 100 1U 3G 200 140 200 200 1U 4G 400 280 400 400 1.0 30.0 1U 5G 600 420 600 600 1U 6G 800 560 800 800 1U 7G 1000 700 1000 1000 units V V V V A A 1.0 1.3 10.0 300.0 15.0 50 50.0 -55 to +150 1.7 V µA µA 75 pF nS Operating Temperature (Note 3) R(ja) Tstg, Tj ° /W C ° C Storage and Operation Junction Temperature Note: 1. Measured at 1.0 MHz and applied voltage of 4.0Vdc 2. Test Condition If =0.5A, Ir =1.0A, Irr =0.25A 3. Thermal Resistance from Junction to Ambient at 0.375" lead length, P.C. Board Mounted Rev.A6 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES 1U1G THRU 1U7G