BYG10Y

BYG10Y SINTERED GLASS JUNCTION SURFACE MOUNTED RECTIFIER VOLTAGE：1600 V CURRENT： 1.5A FEATURE For surface mounted application High temperature metallurgic ally bonded Sintered glass junction Capability of meeting environmental standard of MIL-S-19500 High temperature soldering guaranteed 450℃/10sec/at terminal／complete device Submersible temperature of 265℃ for 10sec GF1/ DO-214BA MECHANICAL DATA Terminal：Plated Terminal, solderable per MIL-STD 202, method 208C Case：Molded with UL-94 class V-0 recognized Flame Retardant Epoxy over Glass Polarity：color band denotes cathode end Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single—phase, half —wave, 60HZ, resistive or inductive load rating at 25℃, unless otherwise stated, for capacitive load, derate current by 20％) SYMBOL Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC blocking Voltage Maximum Average Forward Rectified Current Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Maximum Forward Voltage at rated Forward current Ta =25℃ Maximum full load reverse current full cycle average at 75℃ ambient Maximum DC Reverse Current Ta =25℃ at rated DC blocking voltage Ta =125℃ Typical Junction Capacitance Typical Thermal Resistance (Note 1) (Note 2) Vrrm Vrms Vdc If(av) Ifsm Vf Ir(av) Ir Cj Rth(ja) Tstg, Tj BYG10Y 1600 1120 1600 1.5 50.0 1.15 30.0 5.0 50.0 15.0 80.0 -65 to +175 units V V V A A V µA µA pF ℃/W ℃ Operating and Storage Temperature Range Note： 1. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc 2. Thermal Resistance from Junction to Ambient 6.0mm2 copper pad to each terminal Rev.A1 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES BYG10Y Rev.A1 www.gulfsemi.com