BYV27-600

BYV27-600 SINTERED GLASS JUNCTION ULTRAFAST AVALANCHE RECTIFIER VOLTAGE：600V CURRENT: 1.6A FEATURE Glass passivated High maximum operating temperature Low leakage current Excellent stability Guaranteed avalanche energy absorption capability SOD-57 MECHANICAL DATA Case: SOD-57 sintered glass case Terminal: Plated axial leads solderable per MIL-STD 202E, method 208C Polarity: color band denotes cathode end Mounting position: any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated) SYMBOL Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC blocking Voltage BYV27-600 600 420 600 675min 1.6 40 1.25 20 5.0 150.0 50 65 100 -65 to +175 units V V V V A A V mJ VRRM VRMS VDC V(BR)R IFAV IFSM VF ERSM IR Trr Cd Rth(ja) Tstg, Tj Reverse avalanche breakdown voltage at IR = 0.1 mA Maximum Average Forward Rectified Current 3/8” lead length at Ttp =85°C Non-repetitive Peak Forward Current at t=10ms half sine wave Maximum Forward Voltage at Forward Current 2.0A Non-repetitive peak reverse avalanche energy (Note 1) Maximum DC Reverse Current at rated DC blocking voltage Maximum Reverse Recovery Time Diode Capacitance Typical Thermal Resistance Storage and Operating Junction Temperature Ta =25°C Ta =165°C (Note 2) (Note 3) (Note 4) µA nS pF K/W °C Note: 1. R=400mA; Tj=Tjmax prior to surge; inductive load switched off 2. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A 3. Measured at 1.0 MHz and applied reverse voltage of 0Vdc 4. Device mounted on an epoxy-glass printed-circuit board, 1.5mm thick; thickness of Cu-layer≥40μm Rev.A1 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES BYV27-600 Rev.A1 www.gulfsemi.com