BYV28-4GE

BYV28-1GE THRU BYV28-6GE GLASS PASSIVATED JUNCTION ULTRAFAST EFFICIENT SILICON RECTIFIER VOLTAGE:600V CURRENT:3.5A FEATURE • Plastic package has Underwriters Laboratories Flammability Classification 94V-0 • Ideally suited for use in very high frequency switching power supplies, inverters and as free wheeling diodes • Ultra fast recovery time for high efficiency • Excellent high temperature switching • Glass passivated junction • High temperature soldering guaranteed: 250° C/10 seconds, 0.375" (9.5mm) lead length, DO-201AD MECHANICAL DATA Case: JEDEC DO-201AD molded plastic body over passivated chip Terminals: Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.045 oz., 1.2 g Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated) SYMBOL Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC blocking Voltage Maximum Average Forward Rectified Ta=25°C Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Maximum Forward Voltage at rated Forward Current and 25°C IF=3.5A Maximum Reverse Recovery Time (Note 1) Typical thermal resistance junction to ambient (Note 2) Maximum DC Reverse Current TJ =25°C at rated DC blocking voltage TJ =150°C Storage and Operating Temperature Range Vrrm Vrms Vdc If(av) Ifsm Vf Trr Rθja Ir Tstg, Tj 1.02 25 72 5 150 -55 to +150 BYV28-1GE 100 70 100 BYV28-2GE 200 140 200 3.5 90 1.05 50 1.25 BYV28-4GE 400 280 400 BYV28-6GE 600 420 600 units V V V A A V nS ° C/W µA µA °C Note: 1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A 2.Device mounted on an epoxy-glass printed-circuit board, 1.5 mm thick; thickness of Cu-layer 40 µm, see Fig.6 For more information please refer to the “General Part of associated Handbook”. Rev.A1 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES BYV28-1GE THRU BYV28-6GE 1 1 Rev.A1 www.gulfsemi.com