GBLA06

GBLA005 THRU GBLA10 SINGLE PHASE GLASS PASSIVATED BRIDGE RECTIFIER Voltage: 50 to 1000V Current:4.0A Features Glass passivated chip junction High case dielectric strength High surge current capability Ideal for printed circuit board GBL Mechanical Data Terminal: Plated leads solderable per MIL-STD 202E, Method 208C Case: UL-94 Class V-0 recognized Flame Retardant Epoxy Polarity: Polarity symbol marked on body Mounting position: any Dimensions in millimeters MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half -wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated, for capacitive load, derate current by 20%) Symbol Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward Tc = 50℃(Note1) rectified output current Ta = 40℃(Note2) Peak forward surge current single sine-wave superimposed on rated load (JEDEC Method) Maximum instantaneous forward voltage drop per leg at 4.0A Rating for fusing (t < 8.3ms) Maximum DC reverse current at rated DC blocking voltage per leg Maximum thermal resistance per leg Operating junction and storage temperature range Ta = 25° C Ta = 125° C Vrrm Vrms Vdc If(av) Ifsm Vf I2t Ir Rth(ja) Rth(jc) Tj, Tstg GBLA 005 50 35 50 GBLA 01 100 70 100 GBLA 02 200 140 200 GBLA 04 400 280 400 4.0 3.0 120 1.0 60 5.0 500 47.0 10.0 -55 to +150 GBLA 06 600 420 600 GBLA 08 800 560 800 GBLA 10 1000 700 1000 units V V V A A V A2Sec µA ℃/W ℃ Note: 1. Unit mounted on P.C.B. with 3.0 x 3.0 x 0.11" thick (7.5 x 7.5 x 0.3 cm) Aluminum plate 2. Unit mounted on P.C.B. at 0.375" (9.5mm) lead length and 0.5 x 0.5"(12 x 12mm) copper pads 3. Recommended mounting position is to bolt down on heatsink with silicone thermal compound for maximum heat transfer with #6 screw Rev.A6 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES GBLA005 THRU GBLA10 Rev.A6 www.gulfsemi.com