GS1J-E

GS1J-E THRU GS1M-E SURFACE MOUNT GLASS PASSIVATED RECTIFIER VOLTAGE：600V to 1000V CURRENT： 1.0A FEATURE Ideal for surface mount pick and place application Low profile package Built-in strain relief High surge capability High temperature soldering guaranteed 260℃/10sec/at terminals Halogen Free SMA／DO-214AC MECHANICAL DATA Terminal：Plated axial leads solderable per MIL-STD 202E, method 208C Case ： Molded with UL-94 class V-0 recognized Halogen Free Epoxy Polarity：color band denotes cathode Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25℃, unless otherwise stated, for capacitive load, derate current by 20％) SYMBOL Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC blocking Voltage Maximum Average Forward Rectified Current 3/8″lead length Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Maximum Instantaneous Forward Voltage at rated Forward current Maximum DC Reverse Current Ta =25℃ at rated DC blocking voltage Ta =125℃ Typical Junction Capacitance (Note 1) Typical Thermal Resistance (Note 2) (Note 3) Storage and Operating Junction Temperature Note： 1. Measured at 1.0 MHz and applied voltage of 4.0Vdc 2. Thermal Resistance from Junction to terminal mounted on 5×5mm copper pad area 3. Junction to Case GS1J-E 600 420 600 GS1K-E 800 560 800 1.0 30.0 1.1 5.0 200.0 15.0 30 50 -50 to +150 GS1M-E 1000 700 1000 units V V V A A V µA pF ℃/W ℃ Vrrm Vrms Vdc If(av) Ifsm Vf Ir Cj Rth(jl) Rth(jc) Tj, Tstg Rev.A1 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES GS1J-E THRU GS1M-E Rev.A1 www.gulfsemi.com