RGPP2B

RGPP2A THRU RGPP2M GLASS PASSIVATED FAST RECOVERY RECTIFIER VOLTAGE:50 TO 1000V CURRENT: 2.0A FEATURE Molded case feature for auto insertion High current capability Low leakage current Fast switching capability High temperature soldering guaranteed 250° /10sec/0.375" lead length at 5 lbs tension C Glass Passivated chip DO-15\DO-204AC MECHANICAL DATA Terminal: Plated axial leads solderable per MIL-STD 202E, method 208C Case: Molded with UL-94 Class V-0 recognized Flame Retardant Epoxy Polarity: color band denotes cathode Mounting position: any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated) SYMBOL RGPP 2A RGPP 2B RGPP 2D RGPP 2G RGPP 2J RGPP 2K RGPP 2M units Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC blocking Voltage Maximum Average Forward Rectified Current 3/8”lead length at Ta =55°C Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Maximum Forward Voltage at rated Forward Current and 25°C Maximum full load reverse current full cycle average at 55°C Ambient Maximum DC Reverse Current Ta =25°C at rated DC blocking voltage Ta =150°C Maximum Reverse Recovery Time (Note 1) Typical Junction Capacitance (Note 2) Typical Thermal Resistance (Note 3) Storage and Operating Junction Temperature Vrrm Vrms Vdc If(av) Ifsm Vf Ir(av) Ir Trr Cj Rth(ja) Tstg, Tj 50 35 50 100 70 100 200 140 200 400 280 400 2.0 60.0 1.3 100.0 5.0 200 600 420 600 800 560 800 1000 700 1000 V V V A A V µA µA µA 250 500 nS pF 150 25.0 45.0 -50 to +150 °C /W °C Note: 1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A 2. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc 3. Thermal Resistance from Junction to Ambient at 3/8”lead length, P.C. Board Mounted Rev.1 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES RGPP2A THRU RGPP2M 1 1 Rev.1 www.gulfsemi.com