UGRB20D

UGRB20D Ultra fast Plastic Power Rectifiers VOLTAGE: 200V CURRENT: 20.0A FEATURE • Plastic package has Underwriters Laboratories Flammability Classification 94V-0 • Ideally suited for use in very high frequency switching power supplies, inverters and as free wheeling diodes • Ultra fast recovery time for high efficiency • Excellent high temperature switching • Glass passivated junction • High voltage and high reliability • High speed switching • Low forward voltage TO-263AB/D2PACK MECHANICAL DATA Case: JEDEC D2PAK molded plastic body over passivated chip Terminals: Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated) SYMBOL Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC blocking Voltage Maximum Average Forward Rectified at Tc =100°C Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Maximum Forward Voltage at Forward at 20A Current and 25°C Maximum DC Reverse Current Ta =25°C at rated DC blocking voltage Ta =125°C Maximum Reverse Recovery Time (Note 1) Vrrm Vrms Vdc If(av) Ifsm Vf Ir Trr Rth(jc) Tstg, Tj UGRB20D 200 140 200 20.0 140 1.15 5.0 100.0 15 3.0 -55 to +150 units V V V A A V µA nS ° C/W Typical thermal resistance junction to case Storage and Operating Temperature Range °C Note: 1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A Rev.A1 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES UGRB20D Rev.A1 www.gulfsemi.com