LPWI160808H1R0T

POWER INDUCTOR Surface Mount > LPWI Series LPWI Series Description The Littelfuse LPWI Series offers compact and low profile dimensions, low losses and high efficiency inductor for power supply circuits based thin film photolithography technology. • Mobile phone and Tablet • Portable/wearable devices • Game console, POS, VR, Dongle, and IoT module • Consumer products like PDP, LCD TV, DVD player, PC, Audio player, DSC, STB, Laptop, SSD, and Home automation • Powerbanks and printers • Thin film photolithography technology for compact and low profile • The metal alloy composite for high reliability IN • DC-DC converters and power modules in general use electronic equipment Features • High efficiency and Isat ratings: ∆Temp value up to 95% A Applications RY The metal alloy composite thin film power inductor enables high durability, reliability, quality, excellent temperature saturated characteristics, highly crafted miniaturization, and low-height profiles. • DC resistance as low as 17mOhm typ. • Magnetically shielded • Large current type PR EL IM Benefits © 2019 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 03/26/19 • 1608mm dimension offers space saving on PCBs • Low DCR offers power supply circuit efficiency POWER INDUCTOR Surface Mount > LPWI Series Electrical Characteristics Part Number Size (mm) Size (Inch) Thickness (mm) Inductance@ 1MHz [uH] LPWI160808SR24T 1608 0603 0.8 LPWI160808SR47T 1608 0603 LPWI160808HR47T 1608 0603 LPWI160808S1R0T 1608 LPWI160808H1R0T LPWI201208SR24T DC Resistance [mΩ] Rated DC Current (A) Isat, ΔL/L=30% Itemp, ΔT=40°C Max. Typ. Max. Typ. Max. 0.24 ± 20% 30 40 3.2 2.8 3.2 2.8 0.8 0.47 ± 20% 35 50 2.8 2.5 3.0 2.7 0.8 0.47 ± 20% 37 45 3.4 3.1 3.2 2.9 0603 0.8 1.00 ± 20% 130 1608 0603 0.8 1.00 ± 20% 115 2012 0805 0.8 0.24 ± 20% 17 LPWI201208SR47T 2012 0805 0.8 0.47 ± 20% 30 LPWI201208HR47T 2012 0805 0.8 0.47 ± 20% 30 LPWI201208SR68T 2012 0805 0.8 0.68 ± 20% 58 LPWI201208S1R0T 2012 0805 0.8 1.00 ± 20% 60 LPWI201208S1R5T 2012 0805 0.8 1.50 ± 20% LPWI201210SR47T 2012 0805 1.0 0.47 ± 20% LPWI201210HR47T 2012 0805 1.0 0.47 ± 20% LPWI201210S1R0T 2012 0805 1.0 LPWI201608NR24T 2016 0806 0.8 LPWI201608HR47T 2016 0806 0.8 LPWI201608H1R0T 2016 0806 0.8 LPWI201608S1R0T 2016 0806 0.8 LPWI201608N1R5T 2016 0806 0.8 LPWI201608S2R2T 2016 0806 0.8 LPWI201610SR47T 2016 0806 LPWI201610HR47T 2016 0806 LPWI201610BR47T 2016 LPWI201610SR68T 2016 LPWI201610S1R0T 2.0 1.7 2.0 135 2.2 2.0 2.0 1.7 22 4.8 4.5 4.1 3.9 35 4.2 4.0 4.0 3.8 35 5.0 4.7 4.0 3.8 65 3.4 3.1 2.8 2.5 65 3.4 3.1 3.0 2.7 A 150 1.7 110 120 2.3 2.0 2.1 1.9 25 33 4.7 4.5 4.2 4.0 25 28 5.4 4.9 4.5 4.3 50 60 3.5 3.2 3.0 2.7 0.24 ± 20% 20 25 5.0 4.6 4.2 3.8 0.47 ± 20% 21 27 5.0 4.7 4.1 4.0 1.00 ± 20% 45 50 3.9 3.6 3.5 3.2 1.00 ± 20% 50 65 3.3 2.9 3.0 2.6 IN 1.00 ± 20% RY Typ. 90 120 2.9 2.3 2.1 1.9 130 150 2.0 1.6 1.9 1.5 1.0 0.47 ± 20% 32 40 4.5 4.0 3.8 3.5 1.0 0.47 ± 20% 20 25 5.3 4.8 4.2 3.6 0806 1.0 0.47 ± 20% 21 27 6.0 5.7 5.2 4.8 0806 1.0 0.68 ± 20% 40 50 4.1 3.7 3.5 3.1 2016 0806 1.0 1.00 ± 20% 50 65 3.5 3.1 3.1 2.8 LPWI201610H1R0T 2016 0806 1.0 1.00 ± 20% 40 45 3.9 3.6 3.1 2.7 LPWI201610B1R0T 2016 0806 1.0 1.00 ± 20% 43 46 4.2 4.0 3.5 3.2 LPWI201610H1R5T 2016 0806 1.0 1.50 ± 20% 85 100 3.2 2.8 2.5 2.3 LPWI201610B2R2T 2016 0806 1.0 2.20 ± 20% 117 140 2.6 2.4 2.1 1.9 LPWI201610S2R2T 2016 0806 1.0 2.20 ± 20% 130 150 1.8 1.5 1.7 1.6 LPWI201610H2R2T 2016 0806 1.0 2.20 ± 20% 90 120 2.7 2.5 2.4 2.2 Continued... PR EL IM 1.50 ± 20% 2.20 ± 20% © 2019 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 03/26/19 POWER INDUCTOR Surface Mount > LPWI Series Electrical Characteristics Part Number Size (mm) Size (Inch) Thickness (mm) Inductance@ 1MHz [uH] LPWI252010SR33T 2520 1008 1.0 LPWI252010BR47T 2520 1008 LPWI252010SR47T 2520 LPWI252010HR47T 2520 LPWI252010NR68T DC Resistance [mΩ] Rated DC Current (A) Isat, ΔL/L=30% Itemp, ΔT=40°C Max. Typ. Max. Typ. Max. 0.33 ± 20% 20 25 6.8 6.3 5.8 5.3 1.0 0.47 ± 20% 21 27 6.8 6.5 5.2 4.6 1008 1.0 0.47 ± 20% 25 30 6.0 5.5 4.1 3.7 1008 1.0 0.47 ± 20% 22 2520 1008 1.0 0.68 ± 20% 32 LPWI252010B1R0T 2520 1008 1.0 1.00 ± 20% 33 LPWI252010S1R0T 2520 1008 1.0 1.00 ± 20% 40 LPWI252010H1R0T 2520 1008 1.0 1.00 ± 20% 35 LPWI252010S1R5T 2520 1008 1.0 1.50 ± 20% 65 LPWI252010B2R2T 2520 1008 1.0 2.20 ± 20% 85 LPWI252010S2R2T 2520 1008 1.0 2.20 ± 20% 100 LPWI252010H2R2T 2520 1008 1.0 2.20 ± 20% LPWI252010S3R3T 2520 1008 1.0 3.30 ± 20% LPWI252010S4R7T 2520 1008 1.0 4.70 ± 20% Part Number Size (mm) Size (Inch) Thickness (mm) Inductance@ 1MHz [uH] LPWI201610TR47T 2016 0806 1.0 LPWI201610TAR47T 2016 0806 1.0 LPWI201610TBR47T 2016 0806 1.0 LPWI201610T1R0T 2016 0806 LPWI201610TA1R0T 2016 0806 LPWI201610TB1R0T 2016 0806 6.6 6.0 5.2 4.4 37 5.5 5.0 4.1 3.5 36 5.0 4.7 4.3 4.0 50 4.2 3.8 3.5 3.1 45 4.6 4.1 4.3 4.1 80 3.5 3.1 2.8 2.5 95 3.5 3.1 2.5 2.3 3.0 2.5 2.5 2.3 97 3.5 3.1 2.5 2.3 155 170 2.2 2.0 1.9 1.6 230 245 1.9 1.6 1.8 1.5 IN A 110 DC Resistance [mΩ] Rated DC Current (A) Isat, ΔL/L=30% Itemp, ΔT=40°C Max. Typ. Max. Typ. Max. 0.47 ± 20% 20 25 5.3 4.8 4.2 3.6 0.47 ± 20% 35 40 4.2 3.5 3.7 3.2 0.47 ± 20% 21 27 6.0 5.7 5.2 4.8 1.0 1.00 ± 20% 58 65 3.2 2.8 3.0 2.6 1.0 1.00 ± 20% 40 45 3.9 3.6 3.1 2.7 1.0 1.00 ± 20% 43 46 4.2 4.0 3.5 3.2 EL IM Typ. Test Conditions: • Inductance measuring equipment : 4287A RF LCR meter. (Agilent) at 1MHz , 0.5V • DC Resistance measuring equipment : 4338B Milliohm meter (Agilent) • Withstand voltage : Absolute maximum voltage DC 20V • Rated Current “ΔL/L=30%” : Based on the inductance change rate (30% below the initial L value) • Rated Current “ΔT=40°C” : Based on the temp. increase (40°C by self heating at. room-temperature) PR 27 90 Note: Above PNs have top cover © 2019 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 03/26/19 RY Typ. POWER INDUCTOR Surface Mount > LPWI Series Inductive Vs. Frequency Characteristics Inductive Vs. DC Current Characteristics LPWI160808SR24T LPWI160808SR47T LPWI160808S1R0T LPWI160808HR47T LPWI160808H1R0T 1.2 0.9 1.0 0.8 0.6 0.6 0.4 0.3 0.2 0.0 0.0 1 10 100 Inductive Vs. Frequency Characteristics LPWI201610BR47T LPWI201610B1R0T LPWI201610B2R2T LPWI201610HR47T LPWI201610H1R0T LPWI201610H1R5T LPWI201610H2R2T 2.0 1.5 IM 1.2 0.9 0.6 0.3 0.0 1 10 1.0 0.5 0.0 100 0 1 2 3 4 LPWI201210SR47T LPWI201210S1R0T LPWI201210HR47T 1.2 PR L s (u H) 2.0 x 1.2 x 1.0 mm size 2.0 x 1.2 x 1.0 mm size 1.0 0.6 0.6 0.4 0.3 0.2 1 10 100 Fr e qu e n cy (M Hz) LPWI201210SR47T LPWI201210S1R0T LPWI201210HR47T 0.8 0.9 0.0 6 Inductive Vs. DC Current Characteristics De l t a L (u H) EL Inductive Vs. Frequency Characteristics 5 Cu r r e n t (A ) Fr e qu e n cy (M Hz) 1.5 Cu r r e n t (A ) IN 1.5 3 2.5 De l t a L (u H) L s (u H) 1.8 2 2.0 x 1.2 x 0.8 mm size LPWI201208SR24T LPWI201208SR47T LPWI201208SR68T LPWI201208S1R5T LPWI201208HR47T LPWI201208S1R0T 2.1 1 Inductive Vs. DC Current Characteristics 2.0 x 1.2 x 0.8 mm size 2.4 0 A Fr e qu e n c y (M Hz) LPWI160808SR24T LPWI160808SR47T LPWI160808S1R0T LPWI160808HR47T LPWI160808H1R0T RY 1.5 1.6 x 0.8 x 0.8 mm size De l t a L (u H) L s (u H) 1.6 x 0.8 x 0.8 mm size 0.0 0 1 2 3 4 5 Cu r r e n t (A ) © 2019 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 03/26/19 POWER INDUCTOR Surface Mount > LPWI Series Inductive Vs. Frequency Characteristics Inductive Vs. DC Current Characteristics 4.0 2.0 x 1.6 x 0.8 mm size Inductance(uH) Inductance(uH) 2.0 x 1.6 x 0.8 mm size LPWI201608NR24T LPWI201608S1R0T LPWI201608N1R5T LPWI201608S2R2T LPWI201608HR47T LPWI201608H1R0T 3.5 3.0 2.2 LPWI201608NR24T LPWI201608S1R0T LPWI201608N1R5T LPWI201608S2R2T LPWI201608HR47T LPWI201608H1R0T 2.0 1.8 1.6 1.4 2.5 1.0 0.8 1.5 0.6 1.0 0.4 0.5 0.0 0.2 0.0 1 10 100 0 1 IN Inductance(uH) 2.2 LPWI201610SR47T LPWI201610SR68T LPWI201610S1R0T LPWI201610S2R2T 2.0 1.8 1.6 1.2 1.0 IM 2.0 1.5 1.0 0.5 10 2.0 x 1.6 x 1.0 mm size (High Current) LPWI201610BR47T LPWI201610B1R0T LPWI201610B2R2T LPWI201610HR47T LPWI201610H1R0T LPWI201610H1R5T LPWI201610H2R2T 4.0 PR 3.5 3.0 2.5 0.4 0.2 0.0 Frequency(MHz) Inductive Vs. Frequency Characteristics 4.5 0.6 100 EL 1 0.8 0 1 2 3 Inductive Vs. DC Current Characteristics 2.0 x 1.6 x 1.0 mm size (High Current) 2.5 LPWI201610BR47T LPWI201610B1R0T LPWI201610B2R2T LPWI201610HR47T LPWI201610H1R0T LPWI201610H1R5T LPWI201610H2R2T 2.0 1.5 2.0 4 Current(A) De l t a L (u H) Inductance(uH) 6 1.4 2.5 L s (u H) 5 Inductive Vs. DC Current Characteristics 3.0 0.0 4 2.0 x 1.6 x 1.0 mm size LPWI201610SR47T LPWI201610SR68T LPWI201610S1R0T LPWI201610S2R2T 3.5 3 A Inductive Vs. Frequency Characteristics 2.0 x 1.6 x 1.0 mm size 4.0 2 Current(A) Frequency(MHz) 4.5 RY 1.2 2.0 1.0 1.5 1.0 0.5 0.5 0.0 1 10 100 Fr equ en cy (M Hz) © 2019 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 03/26/19 0.0 0 1 2 3 4 5 Cu r r e n t (A ) 6 POWER INDUCTOR Surface Mount > LPWI Series Inductive Vs. Frequency Characteristics Inductive Vs. DC Current Characteristics LPWI201610TAR47T LPWI201610T1R0T LPWI201610TR47T LPWI201610TA1R0T LPWI201610TBR47T LPWI201610TB1R0T 1.2 0.9 1.2 LPWI201610TAR47T LPWI201610T1R0T LPWI201610TR47T LPWI201610TA1R0T LPWI201610TBR47T LPWI201610TB1R0T 0.9 0.6 0.6 0.3 0.3 0.0 1 10 0.0 100 Inductive Vs. Frequency Characteristics 5 Cu r r e n t (A ) IN Inductance(uH) LPWI252010SR33T LPWI252010SR47T LPWI252010S1R0T LPWI252010S1R5T LPWI252010S2R2T LPWI252010S3R3T LPWI252010S4R7T 4.5 4.0 3.5 3.0 2 10 Inductive Vs. Frequency Characteristics LPWI252010HR47T LPWI252010NR68T LPWI252010H1R0T LPWI252010H2R2T LPWI252010BR47T LPWI252010B1R0T LPWI252010B2R2T 3.5 3.0 PR 2.5 1.0 0.5 0.0 0 3 4 5 6 7 Inductive Vs. DC Current Characteristics 2.5 x 2.0 x 1.0 mm size (High Current) 2.4 LPWI252010HR47T LPWI252010NR68T LPWI252010H1R0T LPWI252010H2R2T LPWI252010BR47T LPWI252010B1R0T LPWI252010B2R2T 2.1 1.8 1.5 1.2 1.5 0.9 0.6 1.0 0.3 0.5 1 2 Current(A) 2.0 0.0 1 Frequency(MHz) 2.5 x 2.0 x 1.0 mm size (High Current) 4.0 1.5 100 EL I 1 2.0 M 4 Inductance(uH) 4 2.5 6 0 3 5.0 Inductance(uH) Inductance(uH) 8 2 2.5 x 2.0 x 1.0 mm size LPWI252010SR33T LPWI252010SR47T LPWI252010S1R0T LPWI252010S1R5T LPWI252010S2R2T LPWI252010S3R3T LPWI252010S4R7T 10 1 Inductive Vs. DC Current Characteristics 2.5 x 2.0 x 1.0 mm size 12 0 A Fr e qu e n c y (M Hz) RY 1.5 2.0 x 1.6 x 1.0 mm size (top cover type) De l t a L (u H) Ls (u H) 2.0 x 1.6 x 1.0 mm size (top cover type) 0.0 10 100 Frequency(MHz) 0 1 2 3 4 5 6 7 Current(A) Test Conditions: • Test Equipment: 4991A RF Impedance Analyzer (Agilent) • Test Frequency: 1MHz ~ 200MHz © 2019 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 03/26/19 POWER INDUCTOR Surface Mount > LPWI Series Soldering Parameters - Temperature Min (Ts(min)) 160°C - Temperature Max (Ts(max)) - Time (Min to Max) (ts) 185°C 1°C/second max TS(max) to TL - Ramp-up Rate 1°C/second max Reflow - Temperature (TL) (Liquidus) - Temperature (tL) 220°C 30 − 50 seconds Critical Zone TL to TP Ramp-up TL TS(max) 100 − 120 seconds Average Ramp-up Rate (Liquidus Temp (TL) to peak) tP TP tL Ramp-down Preheat TS(min) 25 RY Pre Heat Pb-free assembly Temperature Reflow Condition tS Peak Temperature (TP) 260°C Time within 5°C of actual peak Temperature (tp) 5~10 seconds Ramp-down Rate 2°C/second max Product Characteristics Time 25°C to Peak Temperature (TP) 4 minutes max Lead Pull Strength 5N Do not exceed 260°C Solderability 260ºC, ≤10s (Reflow), Max 380ºC,≤5s (Soldering iron) Soldering Heat Resistance Max 260ºC 10sec (Wave), Max Temperature: Max 380ºC (Max 5sec) Operating Temperature -40ºC ~ + 125ºC A IN 260°C, 10 sec. max EL I PR © 2019 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 03/26/19 Time Recommended Soldering Profile ( Lead free condition) M Wave Soldering time to peak temperature (t 25ºC to peak) Climatic Category -40ºC ~ + 85ºC/8 days Stock Conditions -10ºC ~ + 40ºC RH, ≤ 70% Vibration Resistance 5 g’s for 20 minutes, 12 cycles each of 3 orientations POWER INDUCTOR Surface Mount > LPWI Series Dimensions Recommended Footprint and Stencil Mask A Unit = mm E RY B F G C Stencil Mask T = 0.10mm Part Number A B C (max.) D E F G 1.60±0.20 0.80±0.20 0.80 0.30±0.20 1.80+0.10 1.00+0.10 0.80±0.10 2.00±0.20 1.20±0.20 0.80 0.50±0.30 2.40+0.10 1.45+0.10 0.80±0.10 2.00±0.20 1.20±0.20 1.00 0.50±0.30 2.40+0.10 1.45+0.10 0.80±0.10 0.80 0.40±0.10 2.40+0.10 1.80+0.10 1.00±0.10 LPWI160808SR24T LPWI160808S1R0T LPWI160808H1R0T LPWI201208SR24T LPWI201208HR47T LPWI201208SR68T IM LPWI201208SR47T LPWI201208S1R0T LPWI201208S1R5T LPWI201210SR47T LPWI201210HR47T IN LPWI160808SR47T LPWI160808HR47T LPWI201210S1R0T EL LPWI201608LR24T A D LPWI201608NR24T LPWI201608HR47T LPWI201608H1R0T 2.00±0.20 1.60±0.20 LPWI201608S1R0T PR LPWI201608N1R5T © 2019 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 03/26/19 POWER INDUCTOR Surface Mount > LPWI Series Dimensions Recommended Footprint and Stencil Mask A Unit = mm E RY B F G C Stencil Mask T = 0.10mm Part Number A B C (max.) 2.00±0.20 1.60±0.20 1.00 2.00±0.30 1.60±0.20 LPWI201610BR47T LPWI201610B2R2T LPWI201610SR47T LPWI201610SR68T LPWI201610S1R0T LPWI201610S2R2T F G 0.50±0.30 2.40+0.10 1.80+0.10 1.00±0.10 0.40±0.10 2.40+0.10 1.80+0.10 1.00±0.10 1.60±0.10 1.00 0.40±0.10 2.40+0.10 1.70+0.10 1.30±0.10 1.00 0.50±0.30 2.80+0.10 2.20+0.10 1.20±0.10 LPWI201610H1R5T LPWI201610H2R2T LPWI252010SR33T LPWI252010BR47T LPWI252010SR47T LPWI252010HR47T 2.00±0.30 E EL LPWI201610H1R0T 1.00 IM LPWI201610HR47T D IN LPWI201610B1R0T A D LPWI252010NR68T LPWI252010B1R0T LPWI252010S1R0T 2.50±0.20 LPWI252010H1R0T LPWI252010S1R5T PR LPWI252010B2R2T LPWI252010S2R2T LPWI252010H2R2T LPWI252010S3R3T © 2019 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 03/26/19 2.00±0.20 POWER INDUCTOR Surface Mount > LPWI Series A B C ( max.) Include top cover 2.00±0.20 1.60±0.20 1.00 LPWI201610TR47T LPWI201610TBR47T LPWI201610T1R0T LPWI201610TA1R0T LPWI201610TB1R0T F G 0.50±0.30 2.40+0.10 1.80+0.10 1.00±0.10 PR EL IM Special Notice: Above PNs have top cover; no ground E IN LPWI201610TAR47T D A Part Number RY Dimensions © 2019 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 03/26/19 POWER INDUCTOR Surface Mount > LPWI Series Carrier Tape Dimensions 1608mm, 0.8T CHIP INSERTING HOLE FEEDING HOLE P0 P2 D0 B’ F W 5° RY E B0 A A’ B D1 P1 SEC: B - B’ 5° Dimensions Millimeters 1.14±0.05 A Symbol A0 t K0 IN A0 1.95±0.05 W 8.00±0.10 F 3.50±0.05 E 1.75±0.05 P1 4.00±0.10 P2 2.00±0.05 P0 4.00±0.10 D0 1.55+0.03 t 0.22±0.05 IM SEC: A - A’ B0 Tape and Reel Dimensions 1608mm, 0.8T W EL COVER TAPE TAPE D BACK (BOTTOM) TAPE C E B REEL Chip Mounting Section Empty Section Leading Section 50 PITCH 35 PITCH PR Empty Section 45 PITCH R t A (1) Reel Materials: Polystyrene (2) Label (3) Taping - Standard Packing Quantity per Reel (Ø178) - PE Tape: 4,000pcs Code A B C D E W t R Dimension Ø178±2 Min. Ø50 Ø13±0.5 Ø20±0.8 3.0±0.5 10±1.5 1.3±0.2 1.0±0.2 © 2019 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 03/26/19 POWER INDUCTOR Surface Mount > LPWI Series Carrier Tape Dimensions 2012mm, 0.8T CHIP INSERTING HOLE FEEDING HOLE P0 P2 D0 B’ F W 5° RY E B0 A A’ B D1 P1 SEC: B - B’ IN K0 A0 2012mm, 0.8T IM SEC: A - A’ Tape and Reel Dimensions B0 2.35±0.05 A t A0 Dimensions Millimeters 1.50±0.05 Symbol 5° K0 0.90±0.05 W 8.00±0.02 F 3.50±0.05 E 1.75±0.10 P1 4.00±0.10 P2 2.00±0.05 P0 4.00±0.05 D0 1.50+0.10 & -0 D1 1.00±0.05 t 0.25±0.05 W EL COVER TAPE TAPE D BACK (BOTTOM) TAPE C E B REEL Chip Mounting Section PR Empty Section 45 PITCH R Empty Section Leading Section 50 PITCH 35 PITCH t A (1) Reel Materials: Polystyrene (2) Label (3) Taping - Standard Packing Quantity per Reel (Ø178) - PE Tape: 3,000pcs Code A B C D E W t R Dimension Ø178±2 Min. Ø50 Ø13±0.5 Ø20±0.8 3.0±0.5 10±1.5 1.3±0.2 1.0±0.2 © 2019 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 03/26/19 POWER INDUCTOR Surface Mount > LPWI Series Carrier Tape Dimensions 2012mm, 1.0T CHIP INSERTING HOLE FEEDING HOLE P0 P2 D0 B’ F W 5° RY E B0 A A’ B D1 P1 SEC: B - B’ B0 2.35±0.05 K0 1.09±0.05 A t A0 Dimensions Millimeters 1.42±0.10 Symbol 5° IN K0 A0 IM SEC: A - A’ W 8.00±0.2 F 3.50±0.05 E 1.75±0.10 P1 4.00±0.10 P2 2.00±0.05 P0 4.00±0.05 D0 1.50+0.10 & -0 D1 1.00±0.10 t 0.22±0.05 Tape and Reel Dimensions 2012mm, 1.0T W EL COVER TAPE TAPE D BACK (BOTTOM) TAPE C E B REEL Chip Mounting Section PR Empty Section 45 PITCH R Empty Section Leading Section 50 PITCH 35 PITCH t A (1) Reel Materials: Polystyrene (2) Label (3) Taping - Standard Packing Quantity per Reel (Ø178) - PE Tape: 3,000pcs Code A B C D E W t R Dimension Ø178±2 Min. Ø50 Ø13±0.5 Ø20±0.8 3.0±0.5 10±1.5 1.3±0.2 1.0±0.2 © 2019 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 03/26/19 POWER INDUCTOR Surface Mount > LPWI Series Carrier Tape Dimensions 2016mm, 0.8T CHIP INSERTING HOLE FEEDING HOLE P0 P2 D0 B’ E 5° RY F W B0 A A’ B D1 P1 SEC: B - B’ B0 2.35±0.10 K0 1.15±0.10 A t A0 Dimensions Millimeters 1.90±0.10 Symbol 5° K0 A0 EL IM IN SEC: A - A’ W 8.00±0.2 F 3.50±0.05 E 1.75±0.10 P1 4.00±0.10 P2 2.00±0.05 P0 4.00±0.05 D0 1.50+0.10 & -0 D1 1.00±0.10 t 0.22±0.05 Tape and Reel Dimensions 2016mm, 0.8T W COVER TAPE TAPE D BACK (BOTTOM) TAPE C E B REEL Chip Mounting Section PR Empty Section 45 PITCH R Empty Section Leading Section 50 PITCH 35 PITCH t A (1) Reel Materials: Polystyrene (2) Label (3) Taping - Standard Packing Quantity per Reel (Ø178) - PE Tape: 3,000pcs Code A B C D E W t R Dimension Ø178±2 Min. Ø50 Ø13±0.5 Ø21±0.8 2.0±0.5 10±1.5 0.8±0.2 1.0 © 2019 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 03/26/19 POWER INDUCTOR Surface Mount > LPWI Series Carrier Tape Dimensions 2016mm, 1.0T CHIP INSERTING HOLE FEEDING HOLE P0 P2 D0 B’ E 5° RY F W B0 A A’ B D1 P1 SEC: B - B’ B0 2.35±0.10 K0 1.15±0.10 A t A0 Dimensions Millimeters 1.90±0.10 Symbol 5° K0 A0 EL IM IN SEC: A - A’ W 8.00±0.2 F 3.50±0.05 E 1.75±0.10 P1 4.00±0.10 P2 2.00±0.05 P0 4.00±0.05 D0 1.50+0.10 & -0 D1 1.00±0.10 t 0.22±0.05 Tape and Reel Dimensions 2016mm, 1.0T W COVER TAPE TAPE D BACK (BOTTOM) TAPE C E B REEL Chip Mounting Section PR Empty Section 45 PITCH R Empty Section Leading Section 50 PITCH 35 PITCH t A (1) Reel Materials: Polystyrene (2) Label (3) Taping - Standard Packing Quantity per Reel (Ø178) - PE Tape: 3,000pcs Code A B C D E W t R Dimension Ø178±2 Min. Ø50 Ø13±0.5 Ø21±0.8 2.0±0.5 10±1.5 0.8±0.2 1.0 © 2019 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 03/26/19 POWER INDUCTOR Surface Mount > LPWI Series Carrier Tape Dimensions 2520mm, 1.0T CHIP INSERTING HOLE FEEDING HOLE P0 P2 D0 B’ F W 5° RY E B0 A A’ B D1 P1 SEC: B - B’ IN K0 A0 2520mm, 1.0T IM SEC: A - A’ Tape and Reel Dimensions B0 2.74±0.10 K0 1.17±0.10 A t A0 Dimensions Millimeters 2.23±0.10 Symbol 5° W 8.00±0.2 F 3.50±0.05 E 1.75±0.10 P1 4.00±0.10 P2 2.00±0.05 P0 4.00±0.05 D0 1.50+0.10 & -0 D1 1.00±0.10 t 0.22±0.05 W EL COVER TAPE TAPE D BACK (BOTTOM) TAPE C E B REEL Chip Mounting Section PR Empty Section 45 PITCH R Empty Section Leading Section 50 PITCH 35 PITCH t A (1) Reel Materials: Polystyrene (2) Label (3) Taping - Standard Packing Quantity per Reel (Ø178) - PE Tape: 3,000pcs Code A B C D E W t R Dimension Ø178±2 Min. Ø50 Ø13±0.5 Ø20±0.8 3.0±0.5 10±1.5 1.3±0.2 1.0±0.2 © 2019 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 03/26/19 POWER INDUCTOR Surface Mount > LPWI Series Packaging Quantity LPWI1608******* Tape and Reel 4000 LPWI2012******* Tape and Reel 3000 LPWI2016******* Tape and Reel 3000 LPWI2520******* Tape and Reel Part Numbering System RY Packaging Option Part Number 3000 Installation and Handling Guidelines LPWI 201608 S R47 T A Function • Operation of these devices beyond the stated maximum ratings could result in damage to the devices and lead to electrical arcing and/or fire. • These devices are intended to protect against the effects of temporary over-current or over-temperature conditions and are not intended to perform as protective devices where such conditions are expected to be repetitive or prolonged in duration. • Exposure to silicon-based oils, solvents, electrolytes, acids, and similar materials can adversely affect the performance of these PPTC devices. • These devices undergo thermal expansion under fault conditions, and thus shall be provided with adequate space and be protected against mechanical stresses. • Circuits with inductance may generate a voltage (L di/ dt) above the rated voltage of the PPTC device. • Hand-soldering of PTC devices on boards is generally not recommended. Users shall define and verify this process if needed. • Consult Littelfuse when the device is to be applied with thermal processes other than reflow process on the circuit board, such as molding, encapsulation. User should evaluate molding materials used in the charging cable applications to ensure there are no adverse effect on the PTC devices. Power Inductor Series and Dimensions Remark: Characterization Code Inductance @1MHz (uH) R47= 0.47±20% IM Tape and Reel IN (L x W x T, mm ) 2.00 x 1.60 x 0.80 PR EL Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics. © 2019 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 03/26/19