MBRB20100CT

Schottky Barrier Rectifier MBRB20100CT 2x 10A, 100V, TO-263 Common Cathode MBRB20100CT RoHS Pb Description Littelfuse MBR series Schottky Barrier Rectifier is designed to meet the general requirements of commercial applications by providing high temperature, low leakage and low VF products. It is suitable for high frequency switching mode power supply, free-wheeling diodes and polarity protection diodes. Features Pin out Heat sink Heat sink Common Cathode 1 Anode 3 Anode Pinout 1 D2-PAK & D-PAK Common Cathode • H  igh junction temperature capability 3 2 Anode Common Anode Cathode Pinout 2 TO-220AB Common Cathode • High frequency operation • G  uard ring for enhanced ruggedness and long term reliability Common Cathode 1 • Low forward voltage drop 1 2 Applications • C  ommon cathode configuration in surface mount TO-263 package 3 Anode Common Anode Cathode • S  witching mode power supply • DC/DC converters • Polarity protection diodes • Free-wheeling Pinoutdiodes 3 ITO-220AB Common Cathode Maximum Ratings Parameters Symbol Peak Inverse Voltage VRWM Cathode Common Cathode Average Forward CurrentAnode 1 3 2 Peak One Cycle Non-Repetitive Surge Current (per leg)Pinout 4 ITO-220AB Common Anode Heat sink Test Conditions Max Unit - 100 V 50% duty cycle @TC = 105°C, rectangular wave form 10 (per leg) Cathode IF(AV) Cathode IFSM 1 Anode 20 (total device) 150 8.3ms,half Sine pulse 2 A A Pinout 5 TO-220AC Electrical Characteristics Parameters Symbol VF1 Forward Voltage Drop (per leg) * VF2 Test Conditions Max @ 5A, Pulse, TJ = 25 °C 0.80 @ 10A, Pulse, TJ = 125 °C 0.90 @ 5A, Pulse, TJ = 25 °C 0.70 @ 10A, Pulse, TJ = 125 °C 0.80 Reverse Current at DC condition (per leg) IR1 @VR = rated VR TJ = 25 °C 1.0 Reverse Current (per leg) * IR2 @VR = rated VR TJ = 125 °C 6.0 Junction Capacitance (per leg) CT @VR = 5V, TC = 25 °C fSIG = 1MHz 250 Series Inductance (per leg) LS Measured lead to lead 5 mm from package body Voltage Rate of Change dv/dt Unit V mA pF 8.0 nH 10,000 V/μs * Pulse Width < 300μs, Duty Cycle