MHP-TA15-9-72

Metal Hybrid PPTC Devices PRODUCT: MHP-TA15-9-72 DOCUMENT: SCD28374 REV LETTER: E REV DATE: JULY 20, 2015 PAGE NO.: 1 OF 2 Overtemperature Protection Device Circuit Protection Devices Specification Status: Released Electrical Rating Contact Rating DC9V/25A (6000 cycles) Maximum Breaking Current DC5V/80A (100 cycles) Minimum Hold Voltage Maximum Leakage Current 3V 200mA Leads: Copper based alloy Case: LCP Marking: ・□□□□□□□ - Lot Identification ・□□ TE – Control Number, Company logo ・MHP-TA15-9-72 - Part Name Notes: Unspecified dimensions, tolerance should be +/-0.1mm Dimensions in brackets are for reference TABLE I. DIMENSIONS: A MIN 10.9 mm: MAX 11.4 B TYP 1.15 C MIN 3.75 D MAX 3.85 MIN 2.6 E MAX 2.8 MIN 2.6 MAX 2.8 TABLE II. PERFORMANCE RATINGS: OPERATION TEMPERATURE RESET TEMPERATURE RESISTANCE °C °C mohms @ 25°C MIN 67 1 TYP 72 MAX 77 MIN 40 T1 7 TYP 2.5 MAX 5 HOLD CURRENT Amp @ 25°C MIN 15 Amp @ 60°C MIN 5 T is the minimum temperature differential between the actual operation temperature of the device and the reset temperature Metal Hybrid PPTC Devices PRODUCT: MHP-TA15-9-72 DOCUMENT: SCD28374 REV LETTER: E REV DATE: JULY 20, 2015 PAGE NO.: 2 OF 2 Overtemperature Protection Device Circuit Protection Devices ELECTRICAL PERFORMANCE (Typical): Open Time vs. Current Curves – @ 25°C & 60°C Hold Current vs. Temperature Curve OPERATION TEMPERATURE RANGE -30～100℃ Agency Recognitions: Reference Documents: Precedence: Effectivity: UL Recognized File# E349829. CB Recognized File# US-23575-A1-UL PS300 This specification takes precedence over documents referenced herein. Reference documents shall be the issue in effect on the date of invitation for bid. CAUTION Please refer to the MHP-TA series device usage guidelines. Using the products outside the recommended guidelines may result in device damage. Operation beyond the rated voltage or current may result in rupture, electrical arcing or flame. Materials Information ROHS Compliant ELV Compliant Pb-Free Halogen Free* *Halogen Free refers to: Br≤900ppm, Cl≤900ppm, Br+Cl≤1500ppm. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Tyco Electronics Corporation and its affiliates in the TE Connectivity Ltd. group of companies (“TE”) reserves the right to change or update, without notice, any information contained in this publication; to change, without notice, the design, construction, processing, or specification of any product; and to discontinue or limit production or distribution of any product. This publication supersedes and replaces all information previously supplied. Without express written consent by an officer of TE, TE does not authorize the use of any of its products as components in nuclear facility applications, aerospace, or in critical life support devices or systems. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. TE’s only obligations are those in the TE Standard Terms and Conditions of Sale and in no case will TE be liable for any incidental, indirect, or consequential damages arising from the sale, resale, use, or misuse of its products. © 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company. All rights reserved.