P4500SCMCLRP

SIDACtor® Protection Thyristors Baseband Protection (Voice-DS1) SIDACtor® Protection Thyristor Series - DO-214 RoHS Pb e3 Description SIDACtor® Series DO-214AA are designed to protect baseband equipment such as modems, line cards, CPE and DSL from damaging overvoltage transients. The series provides a surface mount solution that enables equipment to comply with global regulatory standards. Features and Benefits • Pb-free E3 means 2nd level interconnect is Pb-free and the terminal finish material is tin(Sn) (IPC/JEDEC J-STD609A.01) • Low voltage overshoot • Low on-state voltage • Does not degrade in capability after multiple surge events within limit. Agency Approvals Agency Agency File Number • UL Recognized to UL 497B as an Isolated Loop Circuit Protector • Low capacitance E133083 • Fails short circuit when surged in excess of ratings Applicable Global Standards Schematic Symbol • TIA-968-A • GR 1089 Intra-building • TIA-968-B • IEC 61000-4-5 2nd Edition • ITU K.20/21 Enhanced Level* • YD/T 1082 • ITU K.20/21 Basic Level • YD/T 993 • GR 1089 Inter-building* • YD/T 950 *A/B-rated parts require series resistance Electrical Characteristics Part Number Marking VDRM @lDRM=5µA VS @100V/µs IH IS IT VT @IT=2.2 Amps Capacitance @1MHz, 2V bias V min V max mA min mA max A max V max pF min P0080SALRP P-8A 6 25 50 800 2.2 4 20 pF max 35 P1200SALRP P12A 100 130 120 800 2.2 4 15 40 P2000SALRP P20A 180 220 120 800 2.2 4 15 35 P0220SALRP P22A 15 32 50 800 2.2 4 20 40 P2500SALRP P25A 230 290 120 800 2.2 4 15 35 P0300SALRP P03A 25 40 50 800 2.2 4 15 40 P0640SALRP P06A 58 77 150 800 2.2 4 15 40 P0720SALRP P07A 65 88 150 800 2.2 4 15 40 P0900SALRP P09A 75 98 150 800 2.2 4 15 40 P1100SALRP P11A 90 130 150 800 2.2 4 15 40 40 P1300SALRP P13A 120 160 150 800 2.2 4 15 P1500SALRP P15A 140 180 150 800 2.2 4 15 40 P1800SALRP P18A 170 220 150 800 2.2 4 15 35 P2100SALRP P21A 180 240 150 800 2.2 4 15 35 P2300SALRP P23A 190 260 150 800 2.2 4 15 35 P2600SALRP P26A 220 300 150 800 2.2 4 15 35 P3100SALRP P31A 275 350 150 800 2.2 4 15 35 P3500SALRP P35A 320 400 150 800 2.2 4 15 35 P0080SBLRP P-8B 6 25 50 800 2.2 4 20 50 P0220SBLRP P22B 15 32 50 800 2.2 4 20 50 P0300SBLRP P03B 25 40 50 800 2.2 4 15 50 P0640SBLRP P06B 58 77 150 800 2.2 4 20 50 P0720SBLRP P07B 65 88 150 800 2.2 4 20 50 © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 01/13/20 SIDACtor® Protection Thyristors Baseband Protection (Voice-DS1) Electrical Parameters (continued) Part Number Marking P0900SBLRP P09B P1100SBLRP P11B VDRM @lDRM=5µA VS @100V/µs IH IS IT VT @IT=2.2 Amps Capacitance @1MHz, 2V bias V min V max mA min mA max A max V max pF min 75 98 150 800 2.2 4 20 50 90 130 150 800 2.2 4 20 50 pF max P1200SBLRP P12B 100 130 120 800 2.2 4 20 50 P1300SBLRP P13B 120 160 150 800 2.2 4 20 50 P1500SBLRP P15B 140 180 150 800 2.2 4 20 50 P1800SBLRP P18B 170 220 150 800 2.2 4 20 50 P2000SBLRP P20B 180 220 120 800 2.2 4 20 50 P2100SBLRP P21B 180 240 150 800 2.2 4 20 35 P2300SBLRP P23B 190 260 150 800 2.2 4 20 50 P2500SBLRP P25B 230 290 120 800 2.2 4 20 50 P2600SBLRP P26B 220 300 150 800 2.2 4 20 35 P3100SBLRP P31B 275 350 150 800 2.2 4 20 35 P3500SBLRP P35B 320 400 150 800 2.2 4 20 35 P4500SBLRP P45B 400 530 150 800 2.2 4 20 50 P0080SCLRP P-8C 6 25 50 800 2.2 4 25 70 P0220SCLRP P22C 15 32 50 800 2.2 4 25 70 P0300SCLRP P03C 25 40 50 800 2.2 4 20 50 P0640SCLRP P06C 58 77 150 800 2.2 4 45 100 P0720SCLRP P07C 65 88 150 800 2.2 4 45 100 P0900SCLRP P09C 75 98 150 800 2.2 4 45 100 P1100SCLRP P11C 90 130 150 800 2.2 4 45 90 P1200SCLRP P12C 100 130 120 800 2.2 4 20 35 85 P1300SCLRP P13C 120 160 150 800 2.2 4 40 P1500SCLRP P15C 140 180 150 800 2.2 4 25 70 P1800SCLRP P18C 170 220 150 800 2.2 4 25 70 P2000SCLRP P20C 180 220 120 800 2.2 4 25 35 P2100SCLRP P21C 180 240 150 800 2.2 4 25 70 P2300SCLRP P23C 190 260 150 800 2.2 4 25 70 P2500SCLRP P25C 230 290 120 800 2.2 4 30 70 P2600SCLRP P26C 220 300 150 800 2.2 4 30 70 P3100SCLRP P31C 275 350 150 800 2.2 4 30 70 P3500SCLRP P35C 320 400 150 800 2.2 4 25 65 P4500SCLRP P45C 400 530 150 800 2.2 4 25 65 Notes: - Absolute maximum ratings measured at TA= 25ºC (unless otherwise noted). - Components are bi-directional. Surge Ratings Series IPP 0.2/310 1 0.5/700 2 2/10 1 2/10 2 8/20 1 1.2/50 2 10/160 1 10/160 2 10/560 1 10/560 2 5/320 1 9/720 2 10/360 1 10/360 2 10/1000 1 10/1000 2 5/310 1 10/700 2 ITSM 50/60 Hz di/dt A min A min A min A min A min A min A min A min A min A min Amps/µs max A 20 150 150 90 50 75 75 45 75 25 500 B 25 250 250 150 100 100 125 80 100 30 500 C 50 500 400 200 150 200 175 100 200 35 500 Notes: 1. Current waveform in µs 2. Voltage waveform in µs - Peak pulse current rating (IPP) is repetitive and guaranteed for the life of the product. - IPP ratings applicable over temperature range of -40ºC to +85ºC - The component must initially be in thermal equilibrium with -40°C < TJ < +150°C © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 01/13/20 SIDACtor® Protection Thyristors Baseband Protection (Voice-DS1) Thermal Considerations Package Symbol Parameter DO-214AA Value Unit TJ Operating Junction Temperature Range -40 to +150 °C TS Storage Temperature Range -65 to +150 °C R0JA Thermal Resistance: Junction to Ambient 90 °C/W V-I Characteristics tr x td Pulse Waveform IT IS IH IDRM -V +V VT VDRM VS IPP – Peak Pulse Current – %IPP +I 100 Waveform = tr x td 50 Half Value 0 0 -I Normalized VS Change vs. Junction Temperature tr = rise time to peak value td = decay time to half value Peak Value td tr tt –– Time (µs) Time (µs) Normalized DC Holding Current vs. Case Temperature 2.0 IH 10 8 6 25 °C 4 IH (TC = 25ºC) 12 Ratio of Percent of VS Change – % 14 2 0 -4 -6 1.8 1.6 1.4 1.0 0.8 0.6 0.4 -8 -40 -20 0 20 40 60 80 100 120 140 160 Junction Temperature (TJ) – °C 25°C 1.2 -40 -20 0 20 40 60 80 100 120 140 160 Case Temperature (TC) - ºC © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 01/13/20 SIDACtor® Protection Thyristors Baseband Protection (Voice-DS1) Soldering Parameters Pb-Free assembly Pre Heat - Temperature Min (Ts(min)) +150°C - Temperature Max (Ts(max)) +200°C - Time (Min to Max) (ts) 60-180 secs. Average ramp up rate (Liquidus Temp (TL) to peak) 3°C/sec. Max. TS(max) to TL - Ramp-up Rate - Temperature (TL) (Liquidus) Reflow - Temperature (tL) 3°C/sec. Max. +217°C 60-150 secs. Peak Temp (TP) +260(+0/-5)°C Time within 5°C of actual Peak Temp (tp) 30 secs. Max. Ramp-down Rate 6°C/sec. Max. Time 25°C to Peak Temp (TP) 8 min. Max. Do not exceed +260°C Physical Specifications TP tP Critical Zone TL to TP Ramp-up TL TS(max) tL Ramp-down Preheat TS(min) tS 25 time to peak temperature (t 25ºC to peak) Time Environmental Specifications Lead Material Copper Alloy Terminal Finish 100% Matte-Tin Plated UL recognized epoxy meeting flammability classification V-0 Body Material Figure 1 Temperature Reflow Condition High Temp Voltage Blocking Temp Cycling Biased Temp & Humidity High Temp Storage Low Temp Storage Thermal Shock Autoclave (Pressure Cooker Test) Resistance to Solder Heat Moisture Sensitivity Level Part Numbering 80% Rated VDRM (VAC Peak ) +125°C or +150°C, 504 or 1008 hrs. MIL-STD-750 (Method 1040) JEDEC, JESD22-A-101 -65°C to +150°C, 15 min. dwell, 10 up to 100 cycles. MIL-STD-750 (Method 1051) EIA/JEDEC, JESD22-A104 52 VDC (+85°C) 85%RH, 504 up to 1008 hrs. EIA/ JEDEC, JESD22-A-101 +150°C 1008 hrs. MIL-STD-750 (Method 1031) JEDEC, JESD22-A-101 -65°C, 1008 hrs. 0°C to +100°C, 5 min. dwell, 10 sec. transfer, 10 cycles. MIL-STD-750 (Method 1056) JEDEC, JESD22-A-106 +121°C, 100%RH, 2atm, 24 up to 168 hrs. EIA/ JEDEC, JESD22-A-102 +260°C, 30 secs. MIL-STD-750 (Method 2031) 85%RH, +85°C, 168 hrs., 3 reflow cycles (+260°C Peak). JEDEC-J-STD-020, Level 1 Part Marking P xxx 0 S x L RP Type P = SIDACtor Median Voltage Construction Variable Reel Pack RoHS Compliant Pxxx xxxxx Part Marking Code (Refer to Electrical Characteristics Table) Date Code IPP Rating Package Type © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 01/13/20 SIDACtor® Protection Thyristors Baseband Protection (Voice-DS1) Dimensions — DO-214AA Case Temperature Measurement Point B D Pad Outline 0.110 (2.8) C A 0.079 (2.0) H E inch (millimeter) F K Inches Dimensions 0.079 (2.0) Millimeters Min Max Min A 0.130 0.156 3.30 Max 3.95 B 0.201 0.220 5.10 5.60 C 0.077 0.087 1.95 2.20 D 0.159 0.181 4.05 4.60 E 0.030 0.063 0.75 1.60 F 0.075 0.096 1.90 2.45 G 0.002 0.008 0.05 0.20 H 0.077 0.104 1.95 2.65 K 0.006 0.016 0.15 0.41 G Packing Options Package Type Description Quantity Added Suffix Industry Standard S DO-214AA Tape & Reel Pack 2500 RP EIA-481-D Tape and Reel Specification — DO-214AA 0.157 (4.0) 0.472 (12.0) 0.36 (9.2) 0.315 (8.0) 0.512 (13.0) Arbor Hole Dia. 0.49 (12.4) 12.99 (330.0) 0.059 DIA (1.5) Cover tape Dimensions are in inches (and millimeters). Direction of Feed Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics. © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 01/13/20