0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
会员中心
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
P4KE300A

P4KE300A

  • 厂商:

    HAMLIN(力特)

  • 封装:

    DO41

  • 描述:

    TVS DIODE 256VWM 414VC AXIAL

  • 详情介绍
  • 数据手册
  • 价格&库存
P4KE300A 数据手册
TVS Diode Axial Leaded – 400W > P4KE series P4KE Series RoHS Pb e3 Description The P4KE Series is designed specifically to protect sensitive electronic equipment from EFTs, ESD, and induced lightning transients. Bi-directional Features Uni-directional Agency Approvals Agency Agency File Number E230531 Maximum Ratings and Thermal Characteristics (TA=25OC unless otherwise noted) Parameter Symbol Value Unit PPPM 400 W PPPM 600 W PD 1.5 W Peak Forward Surge Current, 8.3ms Single Half Sine Wave Unidirectional Only (Note 2) IFSM 60 A Maximum Instantaneous Forward Voltage at 25A for Unidirectional Only (Note 3) VF 3.5/5.0 V Peak Pulse Power Dissipation(Fig.2) by 10/1000us Test Waveform(Fig.4) (Note 1) -Single Die Parts Peak Pulse Power Dissipation(Fig.2) by 10/1000us Test Waveform(Fig.4) (Note 1) -Stacked Die Parts (Note 4) Steady State Power Dissipation on Infinite Heat Sink at TL=75ºC Operating Junction and Storage Temperature Range T J , TSTG -55 to 175 °C Typical Thermal Resistance Junction to Lead RθJL 60 °C/W Typical Thermal Resistance Junction to Ambient RθJA 100 °C/W Notes: 1. Non-repetitive current pulse , per Fig. 4 and derated above TJ (initial) =25OC per Fig. 3. 2. Measured on 8.3ms single half sine wave or equivalent square wave, duty cycle=4 per minute maximum. 3. VF < 3.5V for single die parts and VF< 5.0V for stacked-die parts. 4. For stacked die component details, please refer to part numbers labeled by * in Electrical Characteristics. Functional Diagram • 400W peak pulse capability at 10/1000μs waveform, repetition rate (duty cycles):0.01% • Glass passivated chip junction in DO-41 Package • Fast response time: typically less than 1.0ps from 0 Volts to VBR min • Excellent clamping capability • Typical failure mode is a short circuit • Whisker test is conducted per Table 4a/4c of JEDEC JESD201A • IEC 61000-4-2 ESD 30kV(Air), 30kV (Contact) • EFT protection of data lines in accordance with IEC 61000-4-4 • Low incremental surge resistance • Typical IR ≤ 1 µA for VBR min > 12.6 V • High temperature reflow soldering guaranteed: 260°C/30sec / 0.375”,(9.5mm) lead length, 5 lbs., (2.3kg) tension • VBR @ TJ= VBR@25°C x (1+αT x (TJ - 25)) (αT:Temperature Coefficient, typical value is 0.1%) • UL Recognized compound meeting flammability rating V-0 • Halogen free and RoHS compliant • Pb-free E3 means 2nd level interconnect is Pbfree and the terminal finish material is tin(Sn) (IPC/ JEDEC J-STD-609A.01) Applications TVS components are ideal for the protection of I/O interfaces, VCC bus and other vulnerable circuits used in telecom, computer, industrial ICT equipment and consumer electronic applications. Additional Infomarion Bi-directional Cathode Datasheet Resources Samples Anode Uni-directional © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: JC.10/26/20 TVS Diode Axial Leaded – 400W > P4KE series Electrical Characteristics (T =25°C unless otherwise noted) A Part Number (Uni) Part Number (Bi) Reverse Stand off Voltage VR (Volts) P4KE6.8A P4KE7.5A P4KE8.2A P4KE9.1A P4KE10A P4KE11A P4KE12A P4KE13A P4KE15A P4KE16A P4KE18A P4KE20A P4KE22A P4KE24A P4KE27A P4KE30A P4KE33A P4KE36A P4KE39A P4KE43A P4KE47A P4KE51A P4KE56A P4KE62A P4KE68A P4KE75A P4KE82A P4KE91A P4KE100A P4KE110A P4KE120A P4KE130A P4KE150A P4KE160A P4KE170A P4KE180A P4KE200A P4KE220A P4KE250A P4KE300A P4KE350A* P4KE400A* P4KE440A* P4KE480A* P4KE510A* P4KE530A* P4KE540A* P4KE550A* P4KE6.8CA P4KE7.5CA P4KE8.2CA P4KE9.1CA P4KE10CA P4KE11CA P4KE12CA P4KE13CA P4KE15CA P4KE16CA P4KE18CA P4KE20CA P4KE22CA P4KE24CA P4KE27CA P4KE30CA P4KE33CA P4KE36CA P4KE39CA P4KE43CA P4KE47CA P4KE51CA P4KE56CA P4KE62CA P4KE68CA P4KE75CA P4KE82CA P4KE91CA P4KE100CA P4KE110CA* P4KE120CA* P4KE130CA* P4KE150CA* P4KE160CA* P4KE170CA* P4KE180CA* P4KE200CA* P4KE220CA* P4KE250CA* P4KE300CA* P4KE350CA* P4KE400CA* P4KE440CA* P4KE480CA* P4KE510CA* P4KE530CA* P4KE540CA* P4KE550CA* 5.80 6.40 7.02 7.78 8.55 9.40 10.20 11.10 12.80 13.60 15.30 17.10 18.80 20.50 23.10 25.60 28.20 30.80 33.30 36.80 40.20 43.60 47.80 53.00 58.10 64.10 70.10 77.80 85.50 94.00 94.00 102.00 102.00 111.00 111.00 128.00 128.00 136.00 136.00 145.00 145.00 154.00 154.00 171.00 171.00 185.00 185.00 214.00 214.00 256.00 256.00 300.00 342.00 376.00 408.00 434.00 451.00 460.00 468.00 Breakdown Voltage VBR@ IT (V) Min. 6.45 7.13 7.79 8.65 9.50 10.50 11.40 12.40 14.30 15.20 17.10 19.00 20.90 22.80 25.70 28.50 31.40 34.20 37.10 40.90 44.70 48.50 53.20 58.90 64.60 71.30 77.90 86.50 95.00 105.00 105.00 114.00 114.00 124.00 124.00 143.00 143.00 152.00 152.00 162.00 162.00 171.00 171.00 190.00 190.00 209.00 209.00 237.00 237.00 285.00 285.00 332.00 380.00 418.00 456.00 485.00 503.50 513.00 522.50 Max. 7.14 7.88 8.61 9.55 10.50 11.60 12.60 13.70 15.80 16.80 18.90 21.00 23.10 25.20 28.40 31.50 34.70 37.80 41.00 45.20 49.40 53.60 58.80 65.10 71.40 78.80 86.10 95.50 105.00 116.00 116.00 126.00 126.00 137.00 137.00 158.00 158.00 168.00 168.00 179.00 179.00 189.00 189.00 210.00 210.00 231.00 231.00 263.00 263.00 315.00 315.00 368.00 420.00 462.00 504.00 535.00 556.50 567.00 577.50 Test Current IT (mA) 10 10 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Maximum Maximum Peak Clamping Pulse Current Voltage Ipp (A) VC @ Ipp (V) 10.5 11.3 12.1 13.4 14.5 15.6 16.7 18.2 21.2 22.5 25.5 27.7 30.6 33.2 37.5 41.4 45.7 49.9 53.9 59.3 64.8 70.1 77.0 85.0 92.0 103.0 113.0 125.0 137.0 152.0 152.0 165.0 165.0 179.0 179.0 207.0 207.0 219.0 219.0 234.0 234.0 246.0 246.0 274.0 274.0 328.0 328.0 344.0 344.0 414.0 414.0 482.0 548.0 602.0 658.0 698.0 725.0 740.0 760.0 Maximum Reverse Leakage IR @ VR(µA) Agency Approval 1000 500 200 50 10 5 5 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X - 39.00 36.30 33.90 30.60 28.30 26.30 24.60 22.50 19.30 18.20 16.10 14.80 13.40 12.30 10.90 9.90 9.00 8.20 7.60 6.90 6.30 5.80 5.30 4.80 4.50 4.00 3.60 3.30 3.00 2.70 4.00 2.50 3.70 2.30 3.40 2.00 2.90 1.90 2.80 1.80 2.60 1.70 2.50 1.50 2.20 1.30 1.90 1.20 1.80 1.00 1.50 1.30 1.10 1.00 0.92 0.86 0.83 0.82 0.79 For bidirectional type having VR of 10 volts and less, the IR value is double. For parts without A , the VBR is ± 10% and VC is 5% higher than with A parts, the parts without A are currently available, but not recommended for new designs. The parts with A are preferred. For stack-die parts, use * to label the part number. © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: JC.10/26/20 TVS Diode Axial Leaded – 400W > P4KE series I-V Curve Characteristics Bi-directional Uni-directional Ipp Vc VBR VR IR VF IT IT IR Vc VBR VR V IR IT V Ipp Ipp PPPM VR VBR VC IR VF VR VBR Vc Peak Pulse Power Dissipation -- Max power dissipation Stand-off Voltage -- Maximum voltage that can be applied to the TVS without operation Breakdown Voltage -- Maximum voltage that flows though the TVS at a specified test current (IT) Clamping Voltage -- Peak voltage measured across the TVS at a specified Ippm (peak impulse current) Reverse Leakage Current -- Current measured at VR Forward Voltage Drop for Uni-directional Ratings and Characteristic Curves (T =25°C unless otherwise noted) A Figure 1 - TVS Transients Clamping Waveform Figure 2 - Peak Pulse Power Rating Curve Voltage Transients PPPM-Peak Pulse Power (kW) 100 Voltage or Current Voltage Across TVS Current Through TVS Time TJ initial = Tamb 10 stacked-die, 600W at 10/1000µs, 25°C 1 0.1 0.001 Single die,400W at 10/1000µs, 25°C 0.01 0.1 1 10 td-Pulse Width (ms) © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: JC.10/26/20 TVS Diode Axial Leaded – 400W > P4KE series Ratings and Characteristic Curves (T =25°C unless otherwise noted) (Continued) A Figure 3 - Peak Pulse Power Derating Curve Figure 4 - Pulse Waveform IPPM- Peak Pulse Current, % IRSM Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage % 150 100 75 50 25 0 0 25 50 75 100 125 150 175 200 ( ) 2 50 10/1000µsec. Waveform as defined by R.E.A td 1.0 0 2.0 3.0 4.0 Figure 6 - Typical Transient Thermal Impedance 100 Transient Thermal Impedance (°C/W) 10000 Uni-direconal V=0V 1000 Bi-direconal V=0V 100 Uni/Bi-direconal V=VR 10 10 1 1 1 10 100 0.1 1000 0.01 VBR - Reverse Breakdown Voltage (V) 0.1 1 10 100 1000 TP - Pulse Duration (s) Figure 7 - Maximum Non-Repetitive Forward Surge Current Uni-Directional Only 70 Figure 8 - Peak Forward Voltage Drop vs Peak Forward Current (Typical Values) 100.0 Single die 60 IF - Peak Forward Current (A) - Peak Forward Surve Current (A) Half Value IPPM IPPM t-Time (ms) Figure 5 - Typical Junction Capacitance IFSM TJ=25°C Pulse Width(td) is defined as the point where the peak current decays to 50% of IPPM Peak Value IPPM 100 0 TJ - Initial Junction Temperature (ºC) Cj (pF) tr=10µsec 50 40 30 20 Stacked-die 10.0 1.0 10 0.1 0 1 10 Number of Cycles at 60 Hz 100 0.0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 VF - Peak Forward Voltage (V) © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: JC.10/26/20 TVS Diode Axial Leaded – 400W > P4KE series Soldering Parameters Lead–free assembly Pre Heat - Temperature Min (Ts(min)) 150°C - Temperature Max (Ts(max)) 200°C - Time (min to max) (ts) 60 – 120 secs Average ramp up rate (Liquidus Temp (TL) to peak Reflow Ramp-up 3°C/second max 3°C/second max TS(max) to TL - Ramp-up Rate - Temperature (TL) (Liquidus) 217°C - Time (min to max) (tL) 60 – 150 seconds Peak Temperature (TP) 260+0/-5 °C Time within 5°C of actual peak Temperature (tp) 30 seconds max Ramp-down Rate 6°C/second max Time 25°C to peak Temperature (TP) 8 minutes Max. Do not exceed 260°C Case Polarity Terminal TL tL Critical Zone TL to TP Ts(max) Ramp-down Ts(min) ts Preheat 25˚C t 25˚C to Peak Time (t) Flow/Wave Soldering (Solder Dipping) Peak Temperature : 260OC Dipping Time : 5 seconds Soldering : 1 time Environmental Specifications Physical Specifications Weight tp TP Temperature (T) Reflow Condition 0.012oz., 0.3g JEDEC DO-204AL (DO-41) molded plastic body over passivated junction. Colored band indicates unidirectional component’s cathode end Matte Tin axial leads, solderable per JESD22-B102. High Temp. Storage JESD22-A103 HTRB JESD22-A108 Temperature Cycling JESD22-A104 H3TRB JESD22-A101 RSH JESD22-B106 Dimensions D Dimensions Cathode Band (for uni-directional products only) C A B A Inches Millimeters Min Max Min A 1.000 - 25.40 Max - B 0.160 0.205 4.10 5.20 C 0.028 0.034 0.71 0.86 D 0.080 0.107 2.00 2.70 DO-204AL (DO-41) © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: JC.10/26/20 TVS Diode Axial Leaded – 400W > P4KE series Part Numbering System Part Marking System P4KE xxx XX X Cathode Band Option Code: Blank Reel Tape -B Bulk Packaging F (for uni-directional products only) YYWW Littelfuse Logo Type Code: A Uni-Directional (5% VBR Voltage Tolerance) CA Bi-Directional (5% VBR Voltage Tolerance) P4KEXXX VBR Voltage Code (Refer to the Electrical Characteristics table) Trace Code Marking YY:Year Code WW: Week Code Product Type Series Code Packaging P4KExxxXX Component Package DO-204AL P4KExxxXX-B DO-204AL Part Number 5000 Packaging Option Tape & Reel 500 BOX Quantity Packaging Specification EIA STD RS-296 Littelfuse Spec. Tape and Reel Specification Off Center either side 0.028(0.7) 2.56 (65.0) 0.236 (6.0) 0.047 (1.2) 0.197+/-0.020 (5.0+/- 0.5) 13.0 (330.2) 2.063+0.079/-0.039 (53.0+2.0/-1.0) Dimensions are in inches/mm 3.0 (76.2) 0.68 (17.27) 2.75 (69.85) Recess Depth Max. 0.75 (19.05) Direction of Feed Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics. © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: JC.10/26/20
P4KE300A
物料型号:P4KE系列

器件简介:P4KE系列TVS二极管专为保护敏感电子设备免受电快速瞬变(EFT)、静电放电(ESD)和感应雷击瞬变而设计。

引脚分配:文档中未明确指出具体的引脚分配,但提到了单向和双向两种配置。

参数特性: - 400W的峰值脉冲能力,10/1000μs波形,重复率(占空比):0.01% - 典型IR ≤ 1μA,对于VBR最小值大于12.6V - 高温回流焊接保证:260°C/30秒/0.375”(9.5mm)引脚长度,5磅(2.3kg)张力 - 快速响应时间:从0伏到VBR最小值通常小于1.0皮秒 - 出色的钳位能力 - 典型故障模式为短路

功能详解: - 双向和单向配置 - 玻璃钝化芯片在DO-41封装中 - 通过多个机构认证

应用信息:TVS组件非常适合保护电信、计算机、工业ICT设备和消费电子应用中的I/O接口、VCC总线和其他易损电路。

封装信息:JEDEC DO-204AL(DO-41)模制塑料体,覆盖钝化结。
P4KE300A 价格&库存

很抱歉,暂时无法提供与“P4KE300A”相匹配的价格&库存,您可以联系我们找货

免费人工找货
P4KE300A
  •  国内价格 香港价格
  • 1+5.061591+0.62789
  • 10+3.4020510+0.42203
  • 100+2.31578100+0.28728
  • 500+1.81869500+0.22561
  • 1000+1.654221000+0.20521
  • 2000+1.514162000+0.18783

库存:4286

P4KE300A
  •  国内价格 香港价格
  • 5000+1.360875000+0.16882
  • 10000+1.2652110000+0.15695
  • 15000+1.2162415000+0.15088
  • 25000+1.2083325000+0.14990

库存:4286