RGE1200

Tyco/Electronics Raychem Circuit Protection 308 Constitution Drive Menlo Park, CA 94025-1164 800-227-4856 FAX 800-227-4866 PRODUCT: RGE1200 PolySwitch® PTC Devices DOCUMENT: SCD 23902 PCN: 423253 REV LETTER: G REV DATE: JULY 30, 2001 PAGE NO.: 1 OF 1 Resettable Fuse Specification Status: RELEASED Electrical Rating Voltage: 16V MAX Current: 100A MAX Insulating Material: Cured, Flame Retarded Epoxy Polymer meets UL94 V-0 Requirements Lead Material: 18 AWG Tin/Lead Plated Copper (1.0mm [0.040] nom. diameter) Marking: Raychem Logo and Voltage 16 G1 2 0 0 Part Identification Lot Identification (can be on back) TABLE I. DIMENSIONS: A B MIN MAX MIN MAX mm: 16.4 17.5 22.6 28.0 in*: (0.65) (0.69) (0.89) (1.10) *Rounded off approximation C MIN 9.4 (0.37) D MAX 10.9 (0.43) MIN 7.6 (0.30) E MAX - MIN 2.3 (0.09) MAX 3.5 (0.14) F TYP 1.4 (0.06) TABLE II. PERFORMANCE RATINGS: I HOLD CURRENT RATINGS TIME TO TRIP RESISTANCE AMPS 25°C HOLD 12.0 AMPS AT 25°C HOLD TRIP 12.0 20.4 SECONDS AT 25°C, 60 A MAX 7.5 OHMS AT 25°C MIN MAX 0.0033 0.0086 Recognition: Reference Documents: Precedence: Effectivity: CAUTION: TRIPPED-STATE POWER DISSIPATION WATTS AT 25°C, 16V TYP 4.2 UL, CSA, TUV approved. PS300 This specification takes precedence over documents referenced herein. Reference documents shall be the issue in effect on the date of invitation for bid. Operation beyond the rated voltage or current may result in rupture, electrical arcing or flame.