TFCFK6SA104AC

TF Series Mid Size Snap-acting Switches Features/Benefits • Broad range of operating forces • Ratings up to 21 AMPS • Wide variety of actuator styles • Quick connect terminations Snap-acting J Typical Applications • Motor controls • Thermostatics • Portable tools Specifications Materials CONTACT RATING: From low level* to 21 AMPS @ 277 V AC. ELECTRICAL LIFE: 300,000 cycles at 10 AMPS @ 250 V AC, consult Customer Service Center for typical life of higher rated switches. INSULATION RESISTANCE: 1,000 M ohm min. DIELECTRIC STRENGTH: 1,500 Vrms min. @ sea level. OPERATING TEMPERATURE: –40ºF to 185ºF (–40ºC to 85ºC). OPERATING FORCE: From 15 to 400 grams at actuator button available. MOUNTING: Torque screws 2-5 in/lbs. SWITCH HOUSING: Thermoplastic (UL 94V-0). ACTUATOR BUTTON: Thermoplastic (UL 94V-0). SPRING: Copper alloy. PIVOT: Brass alloy. MOVABLE CONTACTS: Gold alloy for ratings 1 AMP or less. Fine silver for ratings greater than 1 AMP up to 15 AMPS. Precious metal alloy for ratings greater than 15 AMPS. STATIONARY CONTACTS: Gold alloy for ratings 1 AMP or less. Fine silver for ratings greater than 1 AMP. TERMINALS: Brass alloy for ratings up to 10 AMPS. Copper alloy for ratings greater than 10 AMPS. * Low Level=conditions where no arcing occurs during switching, i.e., 0.4 VA max. @ 20 V AC or DC max. Standard electrical life per UL 1054, rated for 6,000 operations. NOTE: Specifications and materials listed above are switches with standard options. For information on specific and custom switches, consult Customer Service Center. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. For additional options not shown in catalog, consult Customer Service Center. T F Series TF SP, Mom. Operating Force CJ 5.29 oz./150 grams CC .53 oz./15 grams CD .88 oz./25 grams CF 1.76 oz./50 grams CG 2.65 oz./75 grams EC 7.94 oz./225 grams EE 14.11 oz./400 grams Electrical Rating J6 15 A, 277 V AC; 1/2 HP, 125, 250 V AC; 5 A, 125 V AC “L”, 0.5 A, 125 V DC; 0.25 A, 250 V DC F5 1 A,125 V AC; 1 A, 3O V DC H8 5 A, 277 V AC; 1/10 HP, 125, 250 V AC J3 21 A, 277 V AC; 1 HP, 125 V AC; 2 HP, 250 V AC; 5 A, 125 V AC “L” K6 11 A, 277 V AC; 1/3 HP, 125, 250 V AC; 0.5 A, 125 V DC; 0.25 A, 250 V DC L3 20 A, 250 V AC; 1 HP, 125 V AC; 2 HP 250 V AC Mounting Style S Standard V Metric Circuitry C SPDT W SPST N.C. Y SPST N.O. Actuator P00 Pin plunger A10 .81” lever roller, high force A15 1.34” lever roller, high force A20 1.05” lever roller, low force A25 1.56” lever roller, low force T10 .84” lever, high force T13 1.34” simulated roller, high force T14 1.29” simulated roller, high force Terminations T15 1.40” lever, high force 40 .187” quick connect T16 2.34” lever, high force 4A .250” quick connect T18 2.75” lever, high force 5A .250” offset quick connect T20 1.10” lever, low force 5B .187” offset quick connect T23 1.56” simulated roller, low force T24 1.50” simulated roller, low force T25 1.62” lever, low force T26 2.57” lever, low force T28 2.97” lever, low force WP0 Wide pin plunger Dimensions are shown: Inch (mm) Specifications and dimensions subject to change J–6 www.ckswitches.com TF Series Mid Size Snap-acting Switches SERIES 1.13 (28,8) TF  MID SIZE SNAP-ACTING SWITCHES – SP MOMENTARY 0.74 (18,7) OPERATING FORCE BASIC SWITCH OPERATING FORCE (OZ./GRAMS) OPTION CODE CC .53 15 J CD .88 25 Snap-acting CF 1.76 50 CG 2.65 75 CJ 5.29 150 EC 7.94 225 EE* 14.11 400 *Minimums may apply, consult Customer Service Center. Operating Force option ‘CC’ not available with ‘T18 & T26’ Actuator options. Operating force varies with actuator option, see ACTUATOR option section. ELECTRICAL RATING CONTACT MATERIAL OPTION CODE RoHS  COMPLIANT * RoHS  COMPATIBLE * MOVABLE  CONTACT STATIONARY CONTACT F5 Yes Yes Gold alloy Gold alloy H8 Yes Yes J3 Yes Yes J6 Yes Yes 15 AMPS @ 277 V AC; 1/2 HP @ 125 & 250 V AC; 5 AMPS @ 125 V AC “L”. 0.5 AMP @ 125 V DC; 0.25 AMP @ 250 V DC. K6 Yes Yes 11 AMPS @ 277 V AC; 1/3 HP @ 125 & 250 V AC; 0.5 AMP @ 125 V DC; 0.25 AMP @ 250 V DC. ELECTRICAL RATING From low level* to 1 AMP @ 125 V AC, 1 AMP @ 30 V DC. 5 AMPS @ 277 V AC; 1/10 HP @ 125 & 250 V AC. Fine Silver Fine Silver 21 AMPS @ 277 V AC; 1 HP @ 125 V AC; 2 HP @ 250 V AC; 5 AMPS @ 125 V AC “L”. Silver alloy L3 Yes 20 AMPS @ 250 V AC; 1 HP @ 125 V AC; 2 HP @ 250 V AC Yes * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. * Low Level=conditions where no arcing occurs during switching, i.e., 0.4 VA max. @ 20 V AC or DC max. All models Consult Customer Service center for availability and delivery of nonstandard ratings. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change J–7 www.ckswitches.com TF Series Mid Size Snap-acting Switches ELECTRICAL RATING OPERATING FORCE ELECTRICAL RATING AMPS CC CD CF CG CJ EC EE (REF.) (15) (25) (50) (75) (150) (225) (400) F5 1 • • • • • • H8 5 • • • • • • • J3 21 X X X X • • • J6 15 X X X X • • • K6 11 X • • • • • • 20 L3 X X X X • • • • AVAILABLE x NOT AVAILABLE ** Available with 4A & 5A terminations only, see page J-10. All models Consult Customer Service center for availability and delivery of nonstandard ratings. J Snap-acting * Low Level=conditions where no arcing occurs during switching, i.e., 0.4 VA max. @ 20 V AC or DC max. MOUNTING STYLE S STANDARD V Metric For 4-40 screw size For 3 mm screw size Dimensions are shown: Inch (mm) Specifications and dimensions subject to change J–8 www.ckswitches.com TF Series Mid Size Snap-acting Switches ACTUATOR OPTION CODE FIG. DIM. A DIM. B DIM. C DIM. D P00 1 .80 (20,3) — .578 ± .015 (14,68 ± 0,38) — A10 2 .81 (20,6) .32 (8,1) .810 ± .020 (20,57 ± 0,51) .19 dia. (4,8Ø) A15 2 1.34 (34,0) .32 (8,1) .810 ± .030 (20,57 ± 0,76) .19 dia. (4,8Ø) A20 2 1.05 (26,7) .54 (13,7) .810 ± .050 (20,57) ± 1,27 .19 dia. (4,8Ø) A25 2 1.56 (39,6) .54 (13,7) .810 ± .075 (20,57 ± 1,91) .19 dia. (4,8Ø) T10 3 .84 (21,3) .32 (8,1) .600 ± .020 (15,24 ± 0,51) — .600 ± .040 (15,24 ± 1,02) — 3 1.40 (35,6) T16 3 2.34 (59,4) .32 (8,1) .600 ± .065 (15,24 ± 1,65) — T18 3 2.75 (69,9) .32 (8,1) .600 ± .080 (15,24 ± 2,03) — T20 3 1.10 (27,9) .54 (13,7) .600 ± .050 (15,24 ± 1,27) — T25 3 1.62 (41,1) .54 (13,7) .600 ± .070 (15,24 ± 1,78) — T26 3 2.57 (65,3) .54 (13,7) .600 ± .150 (15,24 ± 3,81) — T28 3 2.97 (75,4) .54 (13,7) .600 ± .187 (15,24 ) ± 4,75 — T13 4 1.34 (34,0) .32 (8,1) .810 ± .030 (20,57 ± 0,76) .19 dia. (4,8Ø) T14 4 1.29 (32,8) .32 (8,1) .730 ± .030 (18,54 ± 0,76) .19 dia. (6,4Ø) T23 4 .19 dia. (4,8Ø) 4 .54 (13,7) .54 (13,7) .810 ± .065 (20,57 ± 1,65) T24 1.56 (39,6) 1.50 (38,1) .25 dia. (6,4Ø) WP0 5 .80 (20,3) — .730 ± .060 (18,54) ± 1,52 .635 ± .015 (16,13 ± 0,38) J Snap-acting T15 .32 (8,1) — NOTE: Switch characteristics chart on following page. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change J–9 www.ckswitches.com TF Series Mid Size Snap-acting Switches ACTUATOR SWITCH CHARACTERISTICS MAXIMUM OPERATING FORCE (OZ./GRAMS) OPTION CODE Snap-acting J MINIMUM RELEASE FORCE (OZ./GRAMS) MAXIMUM DIFFERENTIAL TRAVEL MAXIMUM PRETRAVEL MINIMUM OVERTRAVEL ALL FORCES ALL FORCES ALL FORCES CC (15) CD (25) CF (50) CG (75) CJ EC EE (150) (225) (400) CC (15) CD (25) CF (50) CG (75) A10 .63 18 1.06 30 2.29 65 3.17 90 6.35 180 7.94 14.11 225 400 .21 6 .35 10 .35 10 .53 15 .71 20 1.98 56 3.88 110 .015 (0,38) .060 (1,52) .030 (0,76) A15 .28 8 .42 12 1.06 30 1.59 45 3 85 4.59 130 7.94 225 .07 2 .14 4 .14 4 .18 5 .35 10 .71 20 2.82 80 .030 (0,76) .100 (2,54) .065 (1,65) A20 0.53 15 0.71 1.41 20 40 2.12 60 4.23 120 6 170 9.7 275 0.07 2 0.11 0.11 3 3 0.18 5 0.42 12 0.71 20 1.41 40 0.025 (0,64) 0.12 (3,05) 0.055 (1,40) A25 .18 5 .28 8 56 16 85 24 1.69 48 2.65 75 4.41 125 .04 1 .07 2 .07 2 .07 2 .21 6 .35 10 .71 20 .050 (1,27) .250 (6,35) .120 (3,05) P00 .53 15 .88 25 1.76 50 2.65 75 5.29 150 7.94 14.11 225 400 .21 6 .35 10 .35 10 .53 15 1.23 35 1.98 56 3.88 110 .010 (0,25) .047 (1,19) .050 (1,27) T10 .63 18 1.06 30 2.29 65 3.17 90 6.35 180 7.94 14.11 225 400 .21 6 .35 10 .35 10 .53 15 .71 20 1.98 56 3.88 110 .015 (0,38) .060 (1,52) .030 (0,76) T13 .28 8 .42 12 1.06 30 1.59 45 3 85 4.59 130 7.94 225 .07 2 .14 4 .14 4 .18 5 .35 10 .71 20 2.82 80 .030 (0,76) .100 (2,54) .065 (1,65) T14 .28 8 .42 12 1.23 35 1.76 50 3.17 90 4.76 135 7.94 225 .07 2 .14 4 .14 4 .18 5 .35 10 .71 20 2.82 80 .030 (0,76) .100 (2,54) .060 (1,52) T15 .25 7 .42 12 1.06 30 1.41 40 2.82 80 4.41 125 7.94 225 .07 2 .14 4 .14 4 .18 5 .28 8 .63 18 2.82 80 .030 (0,76) .110 (2,79) .065 (1,65) T16 .18 5 .28 8 .53 15 .78 22 1.59 45 2.47 70 4.23 120 .04 1 .07 2 .07 2 .07 2 .28 8 .35 10 .71 20 .045 (1,14) .250 (6,35) .125 (3,18) T18 N/A .21 6 .42 12 .71 20 1.41 40 2.12 60 3.53 100 N/A .04 1 .04 1 .07 2 .18 5 .28 8 .56 16 .062 (1,57) .300 (7,62) .155 (3,94) T20 .53 15 .71 20 1.41 40 2.12 60 4.23 120 6 170 9.70 275 .21 6 .35 10 .35 10 .53 15 .71 20 1.98 56 3.88 110 .030 (0,76) .140 (3,56) .060 (1,52) T23 .18 5 .28 8 .56 16 .85 24 1.69 48 2.65 75 4.41 125 .04 1 .07 2 .07 2 .07 2 .21 6 .35 10 .71 20 .050 (1,27) .250 (6,35) .120 (3,05) T24 0.18 5 0.28 0.56 8 16 0.88 25 1.76 50 2.65 75 4.76 135 0.04 1 0.07 0.07 2 2 0.11 3 0.21 6 0.35 10 0.71 20 .005 (1,27) 0.23 (5,84) 0.11 (2.79) T25 .18 5 .28 8 .53 15 .88 25 1.59 45 2.47 70 4.23 120 .04 1 .07 2 .07 2 .07 2 .21 6 .35 10 .99 28 .055 (1,40) .250 (6,35) .125 (3,18) T26 N/A .14 4 .28 8 .04 1 N/A N/A N/A .12 3.5 0.11 3 .21 6 0.18 5 .39 11 0.32 9 .500 (12,70) N/A .05 1.5 0.04 1 .100 (2,54) N/A 2.26 64 1.94 55 .04 1 N/A .85 1.27 24 36 0.71 1.06 20 30 N/A T28 .42 12 0.42 12 0.12 (3,05) .0.560 (14.22) .235 (5,97) 0.285 (7,24) WP0 .53 15 .88 25 1.76 50 2.65 75 5.29 150 .21 6 .35 10 .35 10 .53 15 1.23 35 1.97 56 3.88 110 .010 (0.25) .047 (1,19) .030 (0,51) 7.94 14.11 225 400 CJ EC EE (150) (225) (400) NOTE: For basic switch operating forces, see page J-6. HIGH FORCE, LOW MOTION PIVOT POSITION LOW FORCE, HIGH MOTION PIVOT POSITION Available with actuators A10, A15, T10, T13, T14, T15, T16 and T18. Available with actuators A20, A25, T20, T23, T24, T25, T26, and T28. NOTE: Lever actuator options are available in either of two pivot positions. Levers located in the forward pivot position have lower forces and higher motions. Levers located in the rear pivot position have higher forces and lower motions. Dimensions are shown: Inch (mm) Specifications and dimensions subject to change J–10 www.ckswitches.com TF Series Mid Size Snap-acting Switches TERMINATIONS 40  .187” QUICK CONNECT 4A  .250” QUICK CONNECT 5B  OFFSET .187” QUICK CONNECT 5A  OFFSET .250” QUICK CONNECT J Snap-acting CIRCUITRY C W Y SPDT (Single Pole, Double Throw) SPST N.C. (Single Pole, Single Throw, Normally Closed) SPST N.O. (Single Pole, Single Throw, Normally Open) Dimensions are shown: Inches (mm) Specifications and dimensions subject to change J–11 www.ckswitches.com