V14H175P

Metal-Oxide Varistors (MOVs) Radial Leaded Varistors > LV UltraMOV® Varistor Series HMOVTM Varistor Series RoHS Description The HMOV TM Varistor Series is specifically designed for applications requiring high surge energy absorption and high operating temperature of 125°C. The maximum peak surge current is rated up to 10kA (8/20µs pulse) to protect against indirect lightning strikes, switching surge transients, and abnormally fast transients. Features Agency Approvals Agency Agency Approval Agency File Number UL1449 E320116 IEC 60950-1(Annex Q) IECQ CS 042200 GB 0001 IECQ-C BSI 15.0013 E1291/F • Wide operating • High operating temperature combined voltage range with high isolation voltage • Three disc sizes available: capability: 125°C and 10mm, 14mm, and 20mm 2500V, respectively • Lead-free, Halogen-free, • High surge current and RoHS compliant withstanding capability up to 10kA (8/20µs pulse) • Complies with 1000 cycle, -55°C to 125°C, Thermal Shock Cycling Test Applications • Automation control • LED lighting Additional Information • Power Supply Unit • Security System (fire (outdoor and industrial) alarm or smoke detector) • Solar Power Inverter Datasheet Resources Samples Absolute Maximum Ratings • See Device Ratings and Specifications chart for ratings of individual members of a series. Low Voltage Series Units Continous: Steady State Applied Voltage: AC Voltage Range (VM(AC)RMS) 11 to 625 V DC Voltage Range (VM(DC)) 14 to 825 V 800 to 10,000 A Transient: Non-Repetitive Surge Current, 8/20µs Waveform (ITM) Non-Repetitive Energy Capability, 2ms Waveform (WTM) 0.8 to 150 J Operating Ambient Temperature Range (TA) -55 to +125 °C Storage Temperature Range (TSTG) -55 to +150 °C < 0.01% °C Temperature Coefficient (αV) of Clamping Voltage (VC) at Specified Test Current Hi-Pot Encapsulation (Isolation Voltage Capability) Silicone Coating Insulation Resistance 2500 V >1,000 MΩ CAUTION: Stresses above those listed in "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. © 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 12/12/18 Metal-Oxide Varistors (MOVs) Radial Leaded Varistors > LV UltraMOV® Varistor Series HMOVTM Series Device Ratings and Specifications Maximum Rating (125°C) Silicone Coated Models Part Number (Base part) Branding V10H11P V14H11P V20H11P V10H14P V14H14P V20H14P V10H17P V14H17P V20H17P V10H20P V14H20P V20H20P V10H23P V14H23P V20H23P V10H25P V14H25P V20H25P V10H30P V14H30P V20H30P V10H35P V14H35P V20H35P V10H40P V14H40P V20H40P V10H50P V14H50P V20H50P V10H60P V14H60P V20H60P V10H75P V14H75P V20H75P V10H95P V14H95P V20H95P V10H115P V14H115P V20H115P V10H130P V14H130P V20H130P V10H140P P10H11 P14H11 P20H11 P10H14 P14H14 P20H14 P10H17 P14H17 P20H17 P10H20 P14H20 P20H20 P10H23 P14H23 P20H23 P10H25 P14H25 P20H25 P10H30 P14H30 P20H30 P10H35 P14H35 P20H35 P10H40 P14H40 P20H40 P10H50 P14H50 P20H50 P10H60 P14H60 P20H60 P10H75 P14H75 P20H75 P10H95 P14H95 P20H95 P10H115 P14H115 P20H115 P10H130 P14H130 P20H130 P10H140 Size Disc Dia. (mm) 10 14 20 10 14 20 10 14 20 10 14 20 10 14 20 10 14 20 10 14 20 10 14 20 10 14 20 10 14 20 10 14 20 10 14 20 10 14 20 10 14 20 10 14 20 10 Max Continuous Voltage Specifications (25°C) Max Peak Current (8/20μs) Energy Rating (2ms, 1 pulse) ITM ITM 1 x Pulse 2 x Pulses WTM VNOM Min VNOM Max VC IPK C Varistor Voltage at 1mA VM(AC) RMS VM(DC) (V) (V) (A) (A) (J) (V) (V) (V) (A) (pF) 11 11 11 14 14 14 17 17 17 20 20 20 23 23 23 25 25 25 30 30 30 35 35 35 40 40 40 50 50 50 60 60 60 75 75 75 95 95 95 115 115 115 130 130 130 140 14 14 14 18 18 18 22 22 22 26 26 26 28 28 28 31 31 31 38 38 38 45 45 45 56 56 56 65 65 65 85 85 85 100 100 100 125 125 125 153 153 153 170 170 170 180 1500 3000 5000 1500 3000 5000 1500 3000 5000 1500 3000 5000 1500 3000 5000 1500 3000 5000 1500 3000 5000 1500 3000 5000 1500 3000 5000 3500 6500 10000 3500 6500 10000 3500 6500 10000 3500 6500 10000 3500 6500 10000 3500 6500 10000 3500 800 1800 3000 800 1800 3000 800 1800 3000 800 1800 3000 800 1800 3000 800 1800 3000 800 1800 3000 800 1800 3000 800 1800 3000 3000 5000 7000 3000 5000 7000 3000 5000 7000 3000 5000 7000 3000 5000 7000 3000 5000 7000 3000 4.2 8 25 5 10 28 6.5 13 35 10 20 58 12 23 70 13 25 77 15.5 32 90 20 40 115 25 50 140 20 40 80 24 50 100 29 60 120 36 75 150 30 50 120 40 60 145 45 16.2 16.2 16.2 19.8 19.8 19.8 24.3 24.3 24.3 29.7 29.7 29.7 32.4 32.4 32.4 35.1 35.1 35.1 42.3 42.3 42.3 50.4 50.4 50.4 61.2 61.2 61.2 73.8 73.8 73.8 90 90 90 108 108 108 135 135 135 162 162 162 184.5 184.5 184.5 198 19.8 19.8 19.8 24.2 24.2 24.2 29.7 29.7 29.7 36.3 36.3 36.3 39.6 39.6 39.6 42.9 42.9 42.9 51.7 51.7 51.7 61.6 61.6 61.6 74.8 74.8 74.8 90.2 90.2 90.2 110 110 110 132 132 132 165 165 165 198 198 198 225.5 225.5 225.5 242 36 36 36 43 43 43 53 53 53 65 65 65 71 71 71 77 77 77 93 93 93 110 110 110 135 135 135 135 145 145 165 175 175 200 210 210 250 250 250 300 300 300 340 340 340 360 5 10 20 5 10 20 5 10 20 5 10 20 5 10 20 5 10 20 5 10 20 5 10 20 5 10 20 25 50 100 25 50 100 25 50 100 25 50 100 25 50 100 25 50 100 25 5450 12000 26000 4650 10200 22200 3900 8700 18750 3400 7500 15000 3200 7000 14000 2900 6200 13500 2550 5550 12000 2200 5000 10500 1850 4000 8500 1400 3000 6000 1200 2500 5200 1100 2300 4800 800 1700 3700 465 1190 2400 450 1000 1900 400 Note: 1. Average power dissipation of transients not to exceed 0.4W, 0.6W or 1W for model sizes 10mm, 14mm, and 20mm, respectively. © 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 12/12/18 Maximum Typical Clamping Voltage Capacitance f = (8 x 20μs) 1MHz Metal-Oxide Varistors (MOVs) Radial Leaded Varistors > LV UltraMOV® Varistor Series HMOVTM Series Device Ratings and Specifications Maximum Rating (125°C) Silicone Coated Models Part Number (Base part) Branding V14H140P V20H140P V10H150P V14H150P V20H150P V10H175P V14H175P V20H175P V10H230P V14H230P V20H230P V10H250P V14H250P V20H250P V10H275P V14H275P V20H275P V10H300P V14H300P V20H300P V10H320P V14H320P V20H320P V10H385P V14H385P V20H385P V10H420P V14H420P V20H420P V10H440P V14H440P V20H440P V10H460P V14H460P V20H460P V10H510P V14H510P V20H510P V10H550P V14H550P V20H550P V10H625P V14H625P V20H625P P14H140 P20H140 P10H150 P14H150 P20H150 P10H175 P14H175 P20H175 P10H230 P14H230 P20H230 P10H250 P14H250 P20H250 P10H275 P14H275 P20H275 P10H300 P14H300 P20H300 P10H320 P14H320 P20H320 P10H385 P14H385 P20H385 P10H420 P14H420 P20H420 P10H440 P14H440 P20H440 P10H460 P14H460 P20H460 P10H510 P14H510 P20H510 P10H550 P14H550 P20H550 P10H625 P14H625 P20H625 Max Continuous Voltage Size Disc Dia. (mm) 14 20 10 14 20 10 14 20 10 14 20 10 14 20 10 14 20 10 14 20 10 14 20 10 14 20 10 14 20 10 14 20 10 14 20 10 14 20 10 14 20 10 14 20 Specifications (25°C) Max Peak Current (8/20μs) Energy Rating (2ms, 1 pulse) ITM ITM 1 x Pulse 2 x Pulses WTM VNOM Min VNOM Max VC IPK C Varistor Voltage at 1mA Maximum Typical Clamping Voltage Capacitance f = (8 x 20μs) 1MHz VM(AC) RMS VM(DC) (V) (V) (A) (A) (J) (V) (V) (V) (A) (pF) 140 140 150 150 150 175 175 175 230 230 230 250 250 250 275 275 275 300 300 300 320 320 320 385 385 385 420 420 420 440 440 440 460 460 460 510 510 510 550 550 550 625 625 625 180 180 200 200 200 225 225 225 300 300 300 320 320 320 350 350 350 385 385 385 420 420 420 505 505 505 560 560 560 585 585 585 615 615 615 670 670 670 745 745 745 825 825 825 6500 10000 3500 6500 10000 3500 6500 10000 3500 6500 10000 3500 6500 10000 3500 6500 10000 3500 6500 10000 3500 6500 10000 3500 6500 10000 3500 6500 10000 3500 6500 10000 3500 6500 10000 3500 6500 10000 3500 6500 10000 3500 6500 10000 5000 7000 3000 5000 7000 3000 5000 7000 3000 5000 7000 3000 5000 7000 3000 5000 7000 3000 5000 7000 3000 5000 7000 3000 5000 7000 3000 5000 7000 3000 5000 7000 3000 5000 7000 3000 5000 7000 3000 5000 7000 3000 5000 7000 65 155 50 70 165 55 80 180 60 105 225 65 115 240 70 130 260 75 140 290 80 150 320 85 175 325 90 185 330 95 185 340 95 190 370 98 205 410 98 210 450 110 235 490 198 198 216 216 216 243 243 243 324 324 324 351 351 351 387 387 387 423 423 423 459 459 459 558 558 558 612 612 612 643.5 643.5 643.5 675 675 675 738 738 738 819 819 819 900 900 900 242 242 264 264 264 297 297 297 396 396 396 429 429 429 473 473 473 517 517 517 561 561 561 682 682 682 748 748 748 786.5 786.5 786.5 825 825 825 902 902 902 1001 1001 1001 1100 1100 1100 360 360 395 395 395 455 455 455 595 595 595 650 650 650 710 710 710 775 775 775 840 840 840 1025 1025 1025 1120 1120 1120 1180 1180 1180 1240 1240 1240 1355 1355 1355 1500 1500 1500 1650 1650 1650 50 100 25 50 100 25 50 100 25 50 100 25 50 100 25 50 100 25 50 100 25 50 100 25 50 100 25 50 100 25 50 100 25 50 100 25 50 100 25 50 100 25 50 100 900 1750 360 800 1600 350 700 1400 250 550 1100 220 500 1000 200 450 900 180 400 800 170 380 750 160 360 700 140 300 600 130 260 500 120 220 400 110 200 350 100 180 300 90 160 250 Note: 1. Average power dissipation of transients not to exceed 0.4W, 0.6W or 1W for model sizes 10mm, 14mm, and 20mm respectively.. © 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 12/12/18 Metal-Oxide Varistors (MOVs) Radial Leaded Varistors > LV UltraMOV® Varistor Series Peak Pulse Current Test Waveform for Clamping Voltage PERCENT OF PEAK VALUE Current Energy and Power Dissipation Ratings 90 80 70 600 500 60 400 50 300 600 40 500 200 30 400 20 300 500 400 MAXIMUM CLAMPING VOLTAGE MODEL SIZE 5mm 100 10 200 90 V05x40P 800 V05x35P 70-55V05x30P 50 60 70 80 90 100 110 120 130 140 150 60 V05x25P 50 AMBIENT TEMPERATURE ( oC) 100 V05x23P 40 90 V05x20P V05x40P 80 V05x17P FIGURE 1. CURRENT, ENERGY AND POWER DERATING 30 V05x35P V05x14P 70 V05x11P 60 V05x30P CURVE Note: V05x25P 50 20 current V05x23Pand energy ratings must be reduced for applications The peak surge 40 V05x20P exceeding 125ºCV05x17P ambient temperature. 30 V05x14P V05x11P 10 2010 -3 10 -1 10 0 10 1 10 2 10 3 10 -2 PEAK AMPERES (A) 500 200 400 100 200 90 80 70 60 50 100 90 40 80 70 30 60 50 20 40 10 10 10 PEAK AMPERES (A) 10 10 10 Example - For an 8/20µs Current Waveform: t = TIME FROM 10% TO 90% OF PEAK 10 CLAMPING8µs V07x11P - V07x40P tVOLTAGE = VIRTUAL FRONT 1.25 xt -1 0TIME = =FOR Rise Time 10 -3 10 -21 = T10 10 10 1 10 2 1 TIME TO HALF VALUE t2 = VIRTUAL PEAK AMPERES (A) 20µs = T = Decay Time 3 600 MAXIMUM CLAMPING VOLTAGE CLAMPING VOLTAGE FOR V07x11P - V07x40P EXAMPLE: 500 MODEL SIZE 14mm FOR AN 8/20 s CURRENT WAVEFORM 400 100 90 200 80 70 60 50 100 90 40 80 70 30 60 50 20 40 V10x40P V10x35P200 V10x30P V10x25P V10x23P V10x20P100 V10x40P V10x17P 90 V10x35P V10x14P 80 V10x30P V10x11P V10x25P 70 60 V10x23P 50 V10x20P 40 30 V10x17P V10x14P 10 V10x11P 30 -2 20 -3 10 1020 MAXIMUM MAXIMUM PEAK VOLTS PEAK (V) VOLTS (V) 600 CLAMPING VOLTAGE MAXIMUM MAXIMUM CLAMPING VOLTAGE MODEL500 SIZE 10mm MODEL SIZE 5mm 400 300 MAXIMUM PEAK VOLTS (V) MAXIMUM MAXIMUM PEAK VOLTS PEAK (V) VOLTS (V) 300 300 V05x40P V05x35P V05x30P V05x25P V05x23P V05x20P V05x17P V05x14P V05x11P -1 0 1 10 10 10 PEAK AMPERES (A) 10 10 CLAMPING VOLTAGE FOR V10x11P - V10x40P -3 -2 -1 0 1 10 Maximum 1010 -3 10 10 2 10 3 2 10 3 10 10 10 1 10 -1 (A) 10 0 10 10 -2AMPERES PEAK Clamping Voltage for PEAK 20mm Parts AMPERES (A) 10 2 300 600 500 400 200 600 500 400 300 MAXIMUM CLAMPING VOLTAGE MODEL SIZE 14mm MAXIMUM PEAK VOLTS (V) 300 V20x23P V20x20P V20x17P V20x14P V20x11P V20x23P V20x20P 2 3 4 10 V20x17P 10 10 V20x14P V20x11P 10 10 VOLTAGE FOR V20x11P - V20x40P CLAMPING -3 -2-2 0 1 3 -6 -5 -1 -1 0 2 10-4 10 -3 10 101 10 10 10 10 10 10 10 10 10 1010 PEAK AMPERES (A) PEAK AMPERES (A) CLAMPING VOLTAGE FOR V10x11P - V10x40P CLAMPING VOLTAGE FOR V20x11P - V20x40P © 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 12/12/18 1000 900 800 700 600 10 3 CLAMPING VOLTAGE FOR V14x11P - V14x40P 500 -6 10 3 10 2 CLAMPING VOLTAGE FOR V07x11P - V07x40P V14x11P - V14x40P MAXIMUM CLAMPING VOLTAGE MAXIMUM VOLTAGE 400 CLAMPING MODEL SIZE 10mm MODEL SIZE 20mm MAXIMUM PEAK VOLTS (V) MAXIMUM MAXIMUM PEAK VOLTS PEAK (V)VOLTS (V) 2010 10 3 Maximum Clamping Voltage for 14mm Parts MODEL SIZE 20mm V20x40P V20x35P 200 V20x30P V20x25P V20x40P 100 V20x35P 90 V20x30P 80 V10x40P V20x25P 70 V10x35P 60 V10x30P 50 V10x25P V10x23P 40 V10x20P 30 V10x17P V10x14P V10x11P -5 20 -4 -3 -2 -1 0 1 10 10 10 10 10 10 10 PEAK AMPERES (A) 200 100 200 90 V14x40P 80 70 V14x35P 100 60 V14x30P 90 V07x40P 80 50 V14x25P 70 V07x35P 100 90 V14x40P V14x23P 40 80 V14x20P 60 V07x30P 50 V07x25P 70 V14x35P V14x17P 30 V14x30P 40 V07x23P 60 V07x20P V14x14P 50 V14x25P V14x11P 30 V07x17P V14x23P V07x14P 40 20 V14x20P V07x11P-1 10 -3V14x17P10 10 10 0 10 1 10 2 20-2 30 PEAK AMPERES (A) V14x14P V14x11P 20 - V14x40P CLAMPING VOLTAGE FOR V14x11P 10 -3 -2 -1 0 10 1010 1010 1010 10 110 0 10 210 1 -3 -2 -1 10 3 PEAK AMPERES (A) PEAK AMPERES (A) 1000 CLAMPING VOLTAGE FOR V10x11P - V10x40P 900 40 30 10 8 s = t1 = VIRTUAL FRONT TIME 500 MAXIMUM VOLTAGE 20 CLAMPING s = t2 = VIRTUAL TIME TO MAXIMUM CLAMPING VOLTAGE MODEL400 SIZE 14mm HALF MODEL SIZEVALUE 7mm 300 300 CLAMPING VOLTAGE FOR V05x11P - V68x68P CLAMPING VOLTAGE 800 MAXIMUM V20x11P - V20x40P 700 600 500 1000 400 900 800 300 700 600 200 500 400 300 100 90 80 200 70 60 50 100 40 90 80 30 70 60 20 50 10 3 (IMPULSE DURATION) 2 500 MAXIMUM CLAMPING CLAMPING VOLTAGE FOR VOLTAGE V05x11P - V68x68P 400 MODEL SIZE 10mm 500 200 400 TIME T1 V07x40P V07x35P T2 V07x30P V07x25P V07x23P V07x40P V07x20P V07x35P V07x17P V07x14P V07x30P V07x11P V07x25P 01 = Virtual Origin of Wave V07x23P V07x20PFIGURE 2. PEAK PULSE CURRENT TEST WAVEFORM T = Time from 10% to 90% of Peak 30 V07x17P FOR CLAMPING VOLTAGE V07x14P T1 = Rise Time = 1.25 x T 10 V07x11P 20 10 -3 10 -2 10 -1 10 0 10 1 10 2 10 3 T2 = O Decay Time PEAK AMPERES (A) ORIGIN OF WAVE 1 = VIRTUAL MAXIMUM PEAK VOLTS (V) 10 2 MAXIMUM CLAMPING VOLTAGE 0 MODEL SIZE 7mm T O1 300 Maximum Clamping Voltage for 10mm Parts CLAMPING VOLTAGE FOR V05x11P - V68x68P 10 V10x11P - V10x40P -3 -2 -1 0 1 100 50 CLAMPING VOLTAGE MAXIMUM MODEL SIZE 7mm 300 MAXIMUM CLAMPING VOLTAGE MODEL SIZE 5mm MAXIMUM MAXIMUM PEAK VOLTS PEAK (V) VOLTS (V) MAXIMUM MAXIMUM PEAK VOLTS PEAK (V) VOLTS (V) OF RATED VALUE PERCENT 100 MAXIMUM CLAMPING VOLTAGE MODEL SIZE 20mm 4 10 10 2 10 3 200 100 90 V14x40P 80 70 V14x35P 60 V14x30P 50 V14x25P V14x23P 40 V14x20P V14x17P 30 V14x14P V14x11P 20 -3 10 10 -2 10 -1 10 0 10 1 PEAK AMPERES (A) CLAMPING VOLTAGE FOR V14x11P - V14x40P 10 2 10 3 Metal-Oxide Varistors (MOVs) Radial Leaded Varistors > LV UltraMOV® Varistor Series Maximum Clamping Voltage for 10mm Parts Maximum Clamping Voltage for 10mm Parts V10x130P - V10x625P V10x50P - V10x115P 4,000 MAXIMUM CLAMPING VOLTAGE MODEL SIZE 10mm 10000 MODEL SIZE = 10MM 2,000 130 to 625V M(AC ) RATING MAXIMUM CLAMP VO LTAG E 1,000 900 800 700 600 500 400 MAXIMUM PEAK VOLTAGE (V) MAXIMUM PEAK VOLTS (V) 3,000 V10x115P V10x95P V10x75P V10x60P V10x50P 625 550 510 420 460 440 320 385 275 300 250 230 MAXIMUM LEAKAGE 1000 300 150 175 130 140 200 100 10-6 10-5 10-4 0.001 0.01 0.1 1 10 100 1000 10000 PEAK CURRENT (A) 100 10 -3 10 -2 10 -1 10 0 10 1 PEAK AMPERES (A) 10 2 10 3 10 4 Maximum Clamping Voltage for 14mm Parts Maximum Clamping Voltage for 20mm Parts V20x50P - V20x115P V14x50P - V14x115P 4,000 MAXIMUM CLAMPING VOLTAGE MODEL SIZE 20mm V20x115P V20x95P V20x75P MAXIMUM PEAKVOLTS (V) 500 300 200 V20x60P V20x50P 100 2,000 1,000 900 800 700 600 500 400 10 -3 10 -2 10 -1 10 0 10 1 PEAK AMPERES (A) 10 2 10 3 200 100 10 -3 10 4 Maximum Clamping Voltage for 14mm Parts 10 -2 10 -1 10 0 10 1 PEAK AMPERES (A) 10000 130 to 625V M(AC ) RATING 130 to 625V M(AC ) RATING 550 510 420 460 440 385 320 MAXIMUM CLAMP VOLTA GE 300 275 250 230 MAXIMUM PEAK VOLTAGE (V) MAXIMUM PEAK VOLTAGE (V) 625 MAXIMUM LEAKA GE 1000 625 MAXIMUM LEAKA GE 550 510 420 460 440 0.001 0.01 0.1 PEAK CURRENT (A) 1 385 320 300 275 250 230 1000 150 175 130 140 10-4 10 4 MODEL SIZE = 20MM MAXIMUM CLAMP VO LTAG E 10-5 10 3 V20x130P - V20x625P MODEL SIZE = 14MM 100 10-6 10 2 Maximum Clamping Voltage for 20mm Parts V14x130P - V14x625P 10000 V14x115P V14x95P V14x75P V14x60P V14x50P 300 50 30 MAXIMUM CLAMPING VOLTAGE MODEL SIZE 14mm 3,000 MAXIMUM PEAK VOLTS (V) 1,000 150 175 130 140 10 100 1000 10000 100 10-6 10-5 10-4 0.001 0.01 0.1 1 10 100 1000 10000 PEAK CURRENT (A) © 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 12/12/18 Metal-Oxide Varistors (MOVs) Radial Leaded Varistors > LV UltraMOV® Varistor Series Repetitive Surge Capability for 10mm Parts V10x11P - V10x40P Repetitive Surge Capability for 20mm Parts V20x11P - V20x40P Note: Repetitive surge capability is qualified and tested based on 8/20us current waveform (not combination waveform) and UL1449 40.7.3 (Edition 4) test condition. © 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 12/12/18 Repetitive Surge Capability for 14mm Parts V14x11P - V14x40P Maximum Clamping Voltage 10mm Parts V10x115P - V10x625P NOTE: If pulse ratings are exceeded, a shift of VN(DC)(at specified current) of more then +/-10% could result. This type of shift, which normally results in a decrease of VN(DC), may result in the device not meeting the original published specifications, but does not prevent the device from continuing to function, and to provide ample protection. Metal-Oxide Varistors (MOVs) Radial Leaded Varistors > LV UltraMOV® Varistor Series Repetitive Surge Capability for 10mm Parts Repetitive Surge Capability for 14mm Parts V10x50P - V10x95P V14x50P - V14x95P 10000 10000 1000 100 15x 102x 103x 104x 105x 106x Surge Current (A) Surge Current (A) 1x 2x 10 1 1000 100 1000 10 10000 10 1000 10000 Repetitive Surge Capability for 14mm Parts V14x115P - V14x625P V20x50P - V20x95P 1x 2x 15x 10000 Surge Current (A) 102x 103x 104x 105x ∞ 100 100 Impulse Duration (µs) Repetitive Surge Capability for 20mm Parts Surge Current (A) ∞ 100 Impulse Duration (µs) 1000 15x 102x 103x 104x 105x 1 10 10000 1x 2x 10 1000 1 2 15 102 103 104 ∞ 100 10 1 1 10 100 1000 Impulse Duration (µs) Repetitive Surge Capability for 20mm Parts 10000 10 100 1000 10000 Impulse Duration (µs) Note: Repetitive surge capability is qualified and tested based on 8/20us current waveform (not combination waveform) and UL1449 40.7.3 (Edition 4) test condition. V20x115P - V20x625P © 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 12/12/18 Metal-Oxide Varistors (MOVs) Radial Leaded Varistors > LV UltraMOV® Varistor Series Wave Solder Profile Non Lead–free Profile Lead–free Profile 300 300 250 TEMPERATURE (ºC) 250 TEMPERATURE (ºC) Maximum Wave 260C Maximum Wave 240C 200 150 100 200 150 100 50 50 0 0 0 0.5 1 1.5 2 2.5 3 3.5 4 0 0.5 Physical Specifications 1 1.5 2 2.5 3 3.5 4 TIME(MINUTES) TIME(MINUTES) Environmental Specifications Lead Material Copper Clad Steel Wire Humidity Aging +85°C, 85% RH,1500 hours +/-10% typical voltage change Soldering Characteristics Solderability per MIL–STD–202, Method 208 Thermal Shock -55°C to +125°C, 1000 cycles +/-10% typical voltage change Insulating Material Cured, Silicone meets UL94V–0 requirements Solvent Resistance MIL–STD–202, Method 215 Device Labeling Marked with LF, voltage and date code Moisture Sensitivity Level 1, J–STD–020 © 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 12/12/18 Metal-Oxide Varistors (MOVs) Radial Leaded Varistors > LV UltraMOV® Varistor Series Product Dimensions (mm) Straight Lead Option Outer Crimped Lead Option øD øD A øD A1 A1 SEATING PLANE øb L SEATING PLANE øb L e VRMS Voltage Model e e1 E øb L e e1 E Dimen-sion Inner Crimped Lead Option e1 E 10mm Size 14mm Size 20mm Size Min. mm (in) Max. mm (in) Min. mm (in) Max. mm (in) Min. mm (in) Max. mm (in) 11 - 320 - 16 (0.630) - 20 (0.787) - 26.5 (1.043) 385 - 625 - 17 (0.689) - 20.5 (0.807) - 28.0 (1.102) A1 All - 19.5 (0.768) - 22.5 (0.886) - 29.0 (1.142) ØD All - 12.5 (0.492) - 17 (0.669) - 23.0 (0.906) 6.5 (0.256) 8.5 (0.335) 6.5 (0.256) 8.5 (0.335) 6.5 (0.256) 9.0 (0.354) 8.5 (0.335) 11.0 (0.433) 11 - 30 1.0 (0.039) 3.0 (0.118) 1.0 (0.039) 3.0 (0.118) 1.0 (0.039) 3.0 (0.118) 35 - 320 1.5 (0.059) 3.5 (0.138) 1.5 (0.059) 3.5 (0.138) 1.5 (0.059) 3.5 (0.138) 385 - 625 2.5 (0.098) 5.5 (0.217) 2.5 (0.098) 5.5 (0.217) 2.5 (0.098) 5.5 (0.217) 11 - 30 - 5.0 (0.197) - 5.0 (0.197) - 5.0 (0.197) 35 - 320 - 5.6 (0.220) - 5.6 (0.220) - 5.6 (0.220) 385 - 510 - 7.3 (0.287) - 7.3 (0.287) - 7.3 (0.287) 550 - 625 - 8.3 (0.327) - 8.3 (0.327) - 8.3 (0.327) Øb All 0.76 (0.030) 0.86 (0.034) 0.76 (0.030) 0.86 (0.034) 0.76 (0.030) 0.86 (0.034) L All 25.4 (1.00) - 25.4 (1.00) - 25.4 (1.00) - LTRIM All 2.5 (0.098) 4.5 (0.177) 2.5 (0.098) 4.5 (0.177) 2.5 (0.098) 4.5 (0.177) A 11 - 95 e 115 e1 E Note: Dimensions in Millimetres (Inches) are typical. © 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 12/12/18 DP DP DH Metal-Oxide Varistors (MOVs) DH Radial Leaded Varistors > LV UltraMOV® Varistor Series C SEATING PLANE H1 W0 W2 W1 H0 W2 W1 Db W W Tape and Reel Specifications DD0 P1 t F P0 10, 14, and 20mm Devices Crimped Leads "ZT" STRAIGHT LEADS "L1" PP P2 P2 H H11 DH DH DH DH W0 W2 W1 W1 W0 W2 H H0 Db Db W W W W DD0 DD0 P1 P1 tt FF P0 P0 CrimpedLeads Leads"ZS" "ZT" Straight CRIMPED LEADS "L2" P PP DP DP DP P2 P2 P2 H1 HH 1 1 W DD0 DD0 DD0 DH DH DH U W0 W2 W1 W0 W0 W2 W2 W1 W1 Db Db Db H0H W W E EE DP DP DPDH DH DH C SEATING PLANE Ho W2 W1 W2 W1 W2 W1 W WW P1 P1 P1 P0 P0 P0 t t t F FF Under-crimped Leads "ZU" Crimped "ZT" Straight Leads Leads "ZS" UNDER CRIMPED / IN-LINE LEADS "L3" P P DP DP P2 P2 E E DP DP DH DH DH DH U H1 H1 W2 W1 W2 W1 W2 W1 DP DP C SEATING PLANE W2 W1 W2 W1 EE DP DP W W Ho H W0 W2 W1 W0 W2 W1 Db Db W W DD0 DD0 P1 P1 P0 t t F F P0 Under-crimped Leads "ZU" Straight Leads "ZS" Refer next page for dimension measurement specifications. P2 P DP E DP DHbe accurate and reliable. However, users should independently evaluate the suitability of and DH Disclaimer Notice - Information furnished is believed to test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics. © 2018 Littelfuse, Inc. Specifications are subject to change without notice. H1 12/12/18 Revised: Ho U W0 W2 W1 Db Metal-Oxide Varistors (MOVs) Radial Leaded Varistors > LV UltraMOV® Varistor Series Tape and Reel Specifications (continued) NOTES: • Radial devices on tape are supplied with crimped leads, straight leads, or under-crimped leads • Leads are offset by product dimension e1 • Conforms to ANSI and EIA specifications • Can be supplied to IEC Publication 286-2 20mm SYMBOL DESCRIPTION 10mm 14mm (11Vac to 95Vac voltage) ( 115Vac voltage) P Pitch of Component 25.4 +/- 1.0 25.4 +/- 1.0 25.4 +/- 1.0 25.4 +/- 1.0 P0 Feed Hole Pitch 12.7 +/- 0.2 12.7 +/- 0.2 12.7 +/- 0.2 12.7 +/- 0.2 P1 Feed Hole Center to Pitch 8.85 +/- 0.7 8.85 +/- 0.7 8.85 +/- 0.7 7.70 +/- 0.7 P2 Hole Center to Component Center 12.7 +/- 0.7 12.7 +/- 0.7 12.7 +/- 0.7 12.7 +/- 0.7 F Lead to Lead Distance 7.5 +/- 1.0 7.5 +/- 1.0 7.5 +/- 1.0 10 +/- 1.0 h Component Alignment 2.0 Max 2.0 Max 2.0 Max 2.0 Max W Tape Width 18.0 +1.0 / -0.5 18.0 +1.0 / -0.5 18.0 +1.0 / -0.5 18.0 +1.0 / -0.5 W0 Hold Down Tape Width 12.0 +/- 0.3 12.0 +/- 0.3 12.0 +/- 0.3 12.0 +/- 0.3 W1 Hole Position 9.0 +0.75 / -0.50 9.0 +0.75 / -0.50 9.0 +0.75 / -0.50 9.0 +0.75 / -0.50 W2 Hold Down Tape Position 0.5 Max 0.5 Max 0.5 Max 0.5 Max H Height from Tape Center to Component Base 18.0 +2.0 / -0.0 18.0 +2.0 / -0.0 18.0 +2.0 / -0.0 18.0 +2.0 / -0.0 H0 Seating Plane Height 16.0 +/- 0.5 16.0 +/- 0.5 16.0 +/- 0.5 16.0 +/- 0.5 H1 Component Height 36.0 Max 40.0 Max 46.5 Max 46.5 Max D0 Feed Hole Diameter 4.0 +/- 0.2 4.0 +/- 0.2 4.0 +/- 0.2 4.0 +/- 0.2 t Total Tape Thickness 0.7 +/- 0.2 0.7 +/- 0.2 0.7 +/- 0.2 0.7 +/- 0.2 U Undercrimp Width 8.0 Max 8.0 Max 8.0 Max 8.0 Max p Component Alignment 3° Max 3° Max 3° Max 3° Max Part Numbering System V 10 Littelfuse Varistor Disc Size 10, 14 or 20 mm Coating H: Silicone VM(AC)RMS 11V to 625V Lead-Free and RoHS Compliant H 11 P L1 B 5 XXXXX Other Non-Standard Options Lead Spacing Options Blank: Standard lead spacing (See Dimensions Table) 5: 5mm+/-1.0mm 7: 7.5mm+/-1.0mm 1: 10mm+/-1.0mm Packaging Blank or B: Bulk Pack T: Tape and Reel A: Ammo Pack Lead Formation Blank or L1: Straight L2: Outer Crimp L3: In-Line L4: Trim/Outer Crimp(Bulk pack only) L5: Inner Crimp © 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 12/12/18