V33ZT2PX2855

Metal-Oxide Varistors (MOVs) Radial Lead Varistors > UltraMOV® Varistor Series UltraMOV® Varistor Series RoHS Description The UltraMOV® Metal Oxide Varistor Series is designed for applications requiring high peak surge current ratings and high energy absorption capability. UltraMOV® varistors are primarily intended for use in AC Line Voltage applications such as Surge Protection Device (SPD), Uninterruptable Power Supplies (UPS), AC Power Taps, AC Power Meters, or other products that require voltage clamping of high transient surge currents from sources such as lightning, inductive load switching, or capacitor bank switching. Agency Approvals Agency Agency File Number 3 E320116 Agency Approval UL1449 CECC 42201-006 IEC 61051-1 IEC 61051-2 IEC 60950-1 (Annex Q) for 14mm and 20mm only CECC 42201-006 IEC 61051-1 IEC 61051-2 IEC 60950-1 (Annex Q) for 10mm, 14mm and 20mm only IEC/EN 61051-1 IEC 61051-2 IEC 61051-2-2 IEC 60950-1 (Annex Q) for 10mm, 14mm and 20mm only 116895 1 IECQ-C 1 BSI 14.0001 2 J 50324242 Notes: 1. Epoxy coated only. 2. Phenolic coated only. 3. All epoxy coated sizes are UL Recognized while only 10mm, 14mm, and 20mm phenolic coated parts are UL recognized. These devices are produced in radial lead package sizes of 7, 10,14 and 20mm and offered in a variety of lead forms. UltraMOV® varistor are manufactured with recognized epoxy encapsulation and are rated for ambient temperatures up to 85ºC with no derating. This Series is LASER-branded and is supplied in bulk, ammo pack (fanfold), or tape and reel packaging. Features • Lead–free, Halogen-Free • Custom voltage and RoHS compliant types available • High peak surge • Standard lead form and current rating (ITM) up lead space options to 10kA, single 8 x • High operating 20 pulse, (20mm) temperature range up to 125°C (phenolic coating • Standard operating option). 10mm, 14mm voltage range compatible and 20mm devices are with common AC UL Recognized and line voltages (130 TUV certified with 800V VAC to 625 VAC) isolation voltage rating • Characterized for maximum standby current (Leakage) Absolute Maximum Ratings Continuous UltraMOV® Varistor Series Units 130 to 625 V 1,750 to 10,000 A Steady State Applied Voltage: AC Voltage Range (VM(AC)RMS) Transients: Single-Pulse Peak Current (ITM) 8x20µs Wave (See Figure 2) Single-Pulse Energy Range (WTM) 2ms Square Wave 12.5 to 400 J Operating Ambient Temperature Range (TA) for Epoxy coated -55 to +85 ºC Operating Ambient Temperature Range (TA) for Phenolic coated -55 to +125 ºC Storage Temperature Range (TSTG) for Epoxy coated -55 to +125 ºC Storage Temperature Range (TSTG) for Phenolic coated -55 to +150 ºC Temperature Coefficient (aV) of Clamping Voltage (VC) at Specified Test Current UltraMOV® Varistor Series UltraMOV® Series Ratings & Specifications Maximum Rating (85°C) Epoxy Coated Models Phenolic Coated Models Continuous Specifications (25°C) Transient RMS Volts DC Volts Energy 2ms Part Number Branding Part Number Branding VM(AC) VM(DC) WTM V07E130P P7V130 V07P130P P7P130 (V) 130 (V) 170 (J) 12.5 Peak Current 8 x 20µs Varistor Voltage at 1mA DC Test Current ITM ITM V Min VNOM Max 1 x Pulse 2 x Pulse NOM (A) 1750 (A) 1200 (V) 184.5 (V) 225.5 Maximum Typical Clamping Voltage Capacitance 8 x 20µs VC IPK f = 1MHz (V) 340 (A) 10 (pF) 180 V10E130P P10V130 V10P130P P10P130 130 170 25 3500 2500 184.5 225.5 340 25 450 V14E130P P14V130 V14P130P P14P130 130 170 50 6000 4500 184.5 225.5 340 50 1000 V20E130P P20V130 V20P130P P20P130 130 170 100 10000 6500 184.5 225.5 340 100 1900 V07E140P P7V140 V07P140P P7P140 140 180 13.5 1750 1200 198 242 360 10 160 V10E140P P10V140 V10P140P P10P140 140 180 27.5 3500 2500 198 242 360 25 400 V14E140P P14V140 V14P140P P14P140 140 180 55 6000 4500 198 242 360 50 900 V20E140P P20V140 V20P140P P20P140 140 180 110 10000 6500 198 242 360 100 1750 V07E150P P7V150 V07P150P P7P150 150 200 15 1750 1200 216 264 395 10 150 V10E150P P10V150 V10P150P P10P150 150 200 30 3500 2500 216 264 395 25 360 V14E150P P14V150 V14P150P P14P150 150 200 60 6000 4500 216 264 395 50 800 V20E150P P20V150 V20P150P P20P150 150 200 120 10000 6500 216 264 395 100 1600 V07E175P P7V175 V07P175P P7P175 175 225 17 1750 1200 243 297 455 10 130 V10E175P P10V175 V10P175P P10P175 175 225 35 3500 2500 243 297 455 25 350 V14E175P P14V175 V14P175P P14P175 175 225 70 6000 4500 243 297 455 50 700 V20E175P P20V175 V20P175P P20P175 175 225 135 10000 6500 243 297 455 100 1400 V07E230P P7V230 V07P230P P7P230 230 300 20 1750 1200 324 396 595 10 100 V10E230P P10V230 V10P230P P10P230 230 300 42 3500 2500 324 396 595 25 250 V14E230P P14V230 V14P230P P14P230 230 300 80 6000 4500 324 396 595 50 550 V20E230P P20V230 V20P230P P20P230 230 300 160 10000 6500 324 396 595 100 1100 V07E250P P7V250 V07P250P P7P250 250 320 25 1750 1200 351 429 650 10 90 V10E250P P10V250 V10P250P P10P250 250 320 50 3500 2500 351 429 650 25 220 V14E250P P14V250 V14P250P P14P250 250 320 100 6000 4500 351 429 650 50 500 V20E250P P20V250 V20P250P P20P250 250 320 170 10000 6500 351 429 650 100 1000 V07E275P P7V275 V07P275P P7P275 275 350 28 1750 1200 387 473 710 10 80 V10E275P P10V275 V10P275P P10P275 275 350 55 3500 2500 387 473 710 25 200 V14E275P P14V275 V14P275P P14P275 275 350 110 6000 4500 387 473 710 50 450 V20E275P P20V275 V20P275P P20P275 275 350 190 10000 6500 387 473 710 100 900 V07E300P P7V300 V07P300P P7P300 300 385 30 1750 1200 423 517 775 10 70 V10E300P P10V300 V10P300P P10P300 300 385 60 3500 2500 423 517 775 25 180 V14E300P P14V300 V14P300P P14P300 300 385 125 6000 4500 423 517 775 50 400 V20E300P P20V300 V20P300P P20P300 300 385 250 10000 6500 423 517 775 100 800 V07E320P P7V320 V07P320P P7P320 320 420 32 1750 1200 459 561 840 10 65 V10E320P P10V320 V10P320P P10P320 320 420 67 3500 2500 459 561 840 25 170 V14E320P P14V320 V14P320P P14P320 320 420 136 6000 4500 459 561 840 50 380 V20E320P P20V320 V20P320P P20P320 320 420 273 10000 6500 459 561 840 100 750 V07E385P P7V385 V07P385P P7P385 385 505 36 1750 1200 558 682 1025 10 60 V10E385P P10V385 V10P385P P10P385 385 505 75 3500 2500 558 682 1025 25 160 V14E385P P14V385 V14P385P P14P385 385 505 150 6000 4500 558 682 1025 50 360 V20E385P P20V385 V20P385P P20P385 385 505 300 10000 6500 558 682 1025 100 700 V07E420P P7V420 V07P420P P7P420 420 560 40 1750 1200 612 748 1120 10 55 V10E420P P10V420 V10P420P P10P420 420 560 80 3500 2500 612 748 1120 25 140 V14E420P P14V420 V14P420P P14P420 420 560 160 6000 4500 612 748 1120 50 300 V20E420P P20V420 V20P420P P20P420 420 560 320 10000 6500 612 748 1120 100 600 V07E440P P7V440 V07P440P P7P440 440 585 44 1750 1200 643.5 786.5 1180 10 50 V10E440P P10V440 V10P440P P10P440 440 585 85 3500 2500 643.5 786.5 1180 25 130 V14E440P P14V440 V14P440P P14P440 440 585 170 6000 4500 643.5 786.5 1180 50 260 V20E440P P20V440 V20P440P P20P440 440 585 340 10000 6500 643.5 786.5 1180 100 500 V07E460P P7V460 V07P460P P7P460 460 615 48 1750 1200 675 825 1240 10 45 © 2019 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 10/10/19 Metal-Oxide Varistors (MOVs) Radial Lead Varistors > UltraMOV® Varistor Series Ratings & Specifications (Continued...) Maximum Rating (85°C) Epoxy Coated Models Phenolic Coated Models Continuous Specifications (25°C) Transient RMS Volts DC Volts Energy 2ms Part Number Branding Part Number Branding VM(AC) VM(DC) WTM V10E460P P10V460 V10P460P P10P460 (V) 460 (V) 615 (J) 90 Varistor Voltage at 1mA DC Test Current Peak Current 8 x 20µs Maximum Typical Clamping Voltage Capacitance 8 x 20µs ITM ITM V Min VNOM Max 1 x Pulse 2 x Pulse NOM (A) 3500 (A) 2500 (V) 675 (V) 825 VC IPK f = 1MHz (V) 1240 (A) 25 (pF) 120 V14E460P P14V460 V14P460P P14P460 460 615 180 6000 4500 675 825 1240 50 220 V20E460P P20V460 V20P460P P20P460 460 615 360 10000 6500 675 825 1240 100 400 V07E510P P7V510 V07P510P P7P510 510 670 52 1750 1200 738 902 1355 10 40 V10E510P P10V510 V10P510P P10P510 510 670 92 3500 2500 738 902 1355 25 110 V14E510P P14V510 V14P510P P14P510 510 670 185 6000 4500 738 902 1355 50 200 V20E510P P20V510 V20P510P P20P510 510 670 365 10000 6500 738 902 1355 100 350 V10E550P P10V550 V10P550P P10P550 550 745 95 3500 2500 819 1001 1500 25 100 V14E550P P14V550 V14P550P P14P550 550 745 190 6000 4500 819 1001 1500 50 180 V20E550P P20V550 V20P550P P20P550 550 745 370 10000 6500 819 1001 1500 100 300 V10E625P P10V625 V10P625P P10P625 625 825 100 3500 2500 900 1100 1650 25 90 V14E625P P14V625 V14P625P P14P625 625 825 200 6000 4500 900 1100 1650 50 160 V20E625P P20V625 V20P625P P20P625 625 825 400 10000 6500 900 1100 1650 100 250 NOTE: 1. Average power dissipation of transients should not exceed 0.25W, 0.4W, 0.6W and 1.0W for 7mm, 10mm, 14mm, and 20mm model sizes, respectively. Current Energy and Power Dissipation Ratings Should transients occur in rapid succession, the average power dissipation is the energy (watt-seconds) per pulse times the number of pulses per second. The power so developed must be within the specifications shown on the Device Ratings and Specifications Table for the specific Figure 1A - Power Derating for Epoxy Coated device. The operating values of a MOV need to be derated at high temperatures as shown above. Because varistors only dissipate a relatively small amount of average power they are not suitable for repetitive applications that involve substantial amounts of average power dissipation. Figure 1B - Power Derating for Phenolic Coated 100 90 90 Percentage of Rated Value PERCENT OF RATED VALUE 100 80 70 60 50 40 30 20 70 60 50 40 30 20 10 10 0 -55 80 0 -55 50 60 70 80 90 100 110 120 AMBIENT TEMPERATURE ( oC) 130 50 60 70 80 90 100 110 120 130 140 150 140 150 Ambient Temperature (ºC) FIGURE 1. CURRENT, AND POWER DERATING Peak Pulse Current TestENERGY Waveform PERCENT OF PEAK VALUE CURVE Figure 2 100 01 = Virtual Origin of Wave T = Time from 10% to 90% of Peak T1 = Rise Time = 1.25 x T T2 = Decay Time Example - For an 8/20 µs Current Waveform: 8µs = T1 = Rise Time 20µs = T2 = Decay Time 90 50 10 O1 T TIME T1 O1 T T1 T = = = = T2 Virtual Origin of Wave Time From 10% to 90% of Peak Virtual Front time = 1.25 • t Virtual Time to Half Value (Impulse © 2019 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 10/10/19 Duration) Metal-Oxide Varistors (MOVs) Radial Lead Varistors > UltraMOV® Varistor Series Transient V-I Characteristics Curves Maximum Clamping Voltage for 7mm Parts 10000 10000 MODEL SIZE = 7MM MODEL SIZE = 7MM T = -55oC TO 85oC TAA = -55oC TO 85oC 130 to 510V M(AC) RATING 130 to 510V M(AC) RATING MAXIMUM CLAMP MAXIMUM CLAMP VOLTAGE VOLTAGE MAXIMUM MAXIMUMPEAK PEAKVOLTAGE VOLTAGE(V) (V) V7E130(P)-V7E510(P) 1000 1000 460 420 440 460 420 440 MAXIMUM MAXIMUM LEAKAGE LEAKAGE 510 510 230 250 230 275 250 275 300 320 300 385 320 385 175 150 175 130 140 150 130 140 100 100 -6 10 10-6 Figure 3 10-5 10-5 10-4 10-4 0.001 0.001 0.01 0.01 0.1 0.1 PEAK CURRENT (A) PEAK CURRENT (A) 1 1 10 10 100 100 1000 1000 10000 10000 1000 1000 10000 10000 FIGURE 3. FIGURE 3. Maximum Clamping Voltage for 10mm Parts 10000 10000 MODEL SIZE = 10MM MODEL SIZE = 10MM T = -55oC TO 85oC TAA = -55oC TO 85oC 130 to 625V M(AC) RATING RATING 130 to 625V M(AC) MAXIMUM MAXIMUMPEAK PEAKVOLTAGE VOLTAGE(V) (V) V10E130(P)-V10E625(P) MAXIMUM CLAMP MAXIMUM CLAMP VOLTAGE VOLTAGE 510 550 510 625 550 625 MAXIMUM MAXIMUM LEAKAGE LEAKAGE 1000 1000 230 250 230 275 250 275 300 320 300 385 320 385 420 460 440 420 460 440 175 150 175 130 140 150 130 140 100 100 -6 10 10-6 Figure 4 10-5 10-5 10-4 10-4 0.001 0.001 0.01 0.01 0.1 0.1 PEAK CURRENT (A) PEAK CURRENT (A) 1 1 10 10 100 100 FIGURE 4. FIGURE 4. Maximum Clamping Voltage for 14mm Parts V14E130(P) - V14E625(P) 10000 MODEL SIZE = 14MM TA = -55oC TO 85oC 130 to 625VM(AC) RATING MAXIMUM PEAK VOLTAGE (V) MAXIMUM CLAMP VOLTAGE 625 MAXIMUM LEAKAGE 550 510 420 460 440 385 320 300 275 250 230 1000 150 175 130 140 Figure 5 100 10-6 10-5 10-4 0.001 0.01 0.1 1 10 100 1000 10000 PEAK CURRENT (A) FIGURE 5. 10000 MODEL SIZE = 20MM TA = -55oC TO 85oC 130 to 625V M(AC) RATING © 2019 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 10/10/19 MAXIMUM PEAK VOLTAGE (V) VOLTAGE 300 275 250 230 Metal-Oxide Varistors (MOVs) 625 MAXIMUM LEAKAGE 550 510 420 460 440 385 320 Radial Lead Varistors > UltraMOV® Varistor Series 1000 150 175 130 140 100 Transient V-I Characteristics10-6Curves 10-5 10-4 0.001 0.01 0.1 1 10 100 1000 10000 PEAK CURRENT (A) FIGURE 5. Maximum Clamping Voltage for 20mm Parts V20E130(P) - V20E625(P) 10000 MODEL SIZE = 20MM TA = -55oC TO 85oC 130 to 625V M(AC) RATING MAXIMUM PEAK VOLTAGE (V) MAXIMUM CLAMP VOLTAGE 625 MAXIMUM LEAKAGE 550 510 420 460 440 385 320 300 275 250 230 1000 150 175 130 140 100 10-6 Figure 6 10-5 10-4 0.001 0.01 0.1 1 10 100 1000 10000 PEAK CURRENT (A) FIGURE 6. Pulse Rating Curves Repetitive Surge Capability for 7mm Parts V7E130(P) - V7E460(P) 10000 MODEL SIZE = 7MM TA = -55oC TO 85oC 130 to 460VM(AC) RATING 1 1000 2 SURGE CURRENT (A) 15 10 4 10 5 10 6 10 2 10 3 100 ∞ 10 1 10 Figure 7 100 1000 10000 IMPULSE DURATION (μs) FIGURE 7. Additional Information 10000 MODEL SIZE = 10MM TA = -55oC TO 85oC 130 to 625VM(AC) RATING 1 2 15 Datasheet SURGE CURRENT (A) 1000 10 4 10 2 10 3 Resources 10 5 Samples 10 6 100 ∞ 10 1 10 100 1000 IMPULSE DURATION (μs) FIGURE 8. 10000 © 2019 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 10/10/19 10 4 SURGE CURRENT (A) 15 10 2 10 3 100 10 5 10 6 Metal-Oxide Varistors (MOVs) Radial Lead Varistors > UltraMOV® Varistor Series ∞ 10 1 10 Pulse Rating Curves 100 1000 10000 IMPULSE DURATION (μs) FIGURE 7. Repetitive Surge Capability for 10mm Parts V10E130(P) - VIOE625(P) 10000 MODEL SIZE = 10MM TA = -55oC TO 85oC 130 to 625VM(AC) RATING 1 2 15 SURGE CURRENT (A) 1000 10 4 10 2 10 5 10 3 10 6 100 ∞ 10 Figure 8 1 10 100 1000 10000 IMPULSE DURATION (μs) FIGURE 8. Repetitive Surge Capability for 14mm Parts V14E130(P) -V14E625(P) 10000 10000 11 MODELSIZE SIZE= =14MM 14MM MODEL oC oC oCoC TA TO TA==-55 -55 TO8585 130 130toto625V 625V RATING M(AC) M(AC)RATING 22 15 15 22 1010 1000 1000 4 10 10 4 5 10 10 5 6 10 10 6 SURGE CURRENT (A) SURGE CURRENT (A) 33 1010 100 100 ∞∞ 10 10 Figure 9 1 1 10 10 100 100 1000 1000 100000 100000 SURGE CURRENT (A) SURGE CURRENT (A) MODEL SIZE = 20MM oC = -55oCSIZE TO 85 TA MODEL = 20MM oC TO 85oC = -55 TA to 130 625V M(AC) RATING 130 to 625VM(AC) RATING 1 10000 10000 10000 10000 FIGURE 9. FIGURE 9. Repetitive Surge Capability for 20mm Parts V20E130(P) -V20E625(P) IMPULSE DURATION (μs) IMPULSE DURATION (μs) 1 2 215 15 10 2 10 2 3 10 10 3 1000 1000 10 4 5 10 10 4 510 6 10 10 6 100 100 ∞ ∞ 10 10 Figure 10 1 1 10 10 100 100 1000 IMPULSE DURATION (μs) 1000 10000 10000 IMPULSE DURATION (μs) FIGURE 10. Note: Repetitive surge capability is qualified and tested based on 8/20us current waveform (not combination waveform) and UL1449 40.7.3 (Edition 4) test condition. FIGURE 10. © 2019 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 10/10/19 Metal-Oxide Varistors (MOVs) Radial Lead Varistors > UltraMOV® Varistor Series Wave Solder Profile Non Lead–free Profile Lead–free Profile 300 300 250 TEMPERATURE (ºC) TEMPERATURE (ºC) Maximum Wave 260C Maximum Wave 240C 250 200 150 100 50 200 150 100 50 0 0 0 0.5 1 Figure 11 1.5 2 2.5 3 3.5 4 Physical Specifications Lead Material Soldering Characteristics Insulating Material Device Labeling 0 0.5 1 Figure 12 TIME(MINUTES) 1.5 2 2.5 3 3.5 4 TIME(MINUTES) Environmental Specifications Copper Clad Steel Wire Solderability per MIL–STD–202, Method 208 Cured, flame retardant epoxy polymer meets UL94V–0 requirements Marked with LF, voltage, UL/CSA logos, and date code Operating Temperature Storage Temperature Humidity Aging Thermal Shock Solvent Resistance Moisture Sensitivity -55°C to +85°C -55°C to +125°C +85°C, 85% RH, 1000 hours +/-10% typical voltage change +85°C to -40°C 5 times +/-10% typical voltage change MIL–STD–202, Method 215 Level 1, J-STD-020 Phenolic Coating Option -- UltraMOV® Varistor Series for Hi-Temperature Operating Conditions: • Phenolic Coated UltraMOV® Varistor Series devices are available with improved maximum operating temperature 125°C. • These devices also have improved temperature cycling performance capability. • Ratings and Specifications are as per standard UltraMOV® Series except Hi–Pot Encapsulation (Isolation Voltage Capability) = 800V. • Phenolic Coating is HALOGEN FREE. To order: change 'E' (Epoxy coating) in part number to 'P' (Phenolic coating; e.g. V20P230) • See Part Numbering System section of this series for more information. • Contact factory for further details. • Product marking: Lead-Free, Halogen-Free & RoHS Compliant Indicator LF 9 P20P230 YYWW Phenolic Coated Option Identifier Note: 10mm, 14mm and 20mm devices are UL recognized and TUV certified with 800V isolation voltage rating. © 2019 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 10/10/19 Metal-Oxide Varistors (MOVs) Radial Lead Varistors > UltraMOV® Varistor Series Product Dimensions (mm) Lead form options L2 and L4 (refer to table below) Lead form options L1 and L3 (refer to table below) * SEATING ATRIM PLANE LTRIM *Seating plane interpretation per IEC-717 (not available on tape or ammo pack) Dimension A ØD e (Note 2) e1 (Note 3) E Øb VRMS Voltage Model 7mm Size 10mm Size 14mm Size Min. mm (in) Max. mm (in) Min. mm (in) Max. mm (in) Min. mm (in) 20mm Size Max. mm (in) Min. mm (in) Max. mm (in) 26.5 (1.043) 130-320 - 12 (0.472) - 16 (0.630) - 20 (0.787) - 385-625 - 13 (0.512) - 17 (0.689) - 20.5 (0.807) - 28 (1.102) All - 9 (0.354) - 12.5 (0.492) - 17 (0.669) - 23 (0.906) All 4 (0.157) 6 (0.236) 6.5 (0.256) 8.5 (0.335) 6.5 (0.256) 8.5 (0.335) 9 (0.354) 11 (0.433) 130-320 1.5 (0.059) 3.5 (0.138) 1.5 (0.059) 3.5 (0.138) 1.5 (0.059) 3.5 (0.138) 1.5 (0.059) 3.5 (0.138) 385-625 2.5 (0.098) 5.5 (0.217) 2.5 (0.098) 5.5 (0.217) 2.5 (0.098) 5.5 (0.217) 2.5 (0.098) 5.5 (0.217) 130-320 - 5.6 (0.220) - 5.6 (0.220) - 5.6 (0.220) - 5.6 (0.220) 385-510 - 7.3 (0.287) - 7.3 (0.287) - 7.3 (0.287) - 7.3 (0.287) 550-625 - 8.3 (0.327) - 8.3 (0.327) - 8.3 (0.327) - -8.3 (0.327) All 0.585 (0.023) 0.685 (0.027) 0.76 (0.030) 0.86 (0.034) 0.76 (0.030) 0.86 (0.034) 0.76 (0.030) (Note 2) 0.86 (0.034) (Note 2) A TRIM All - 15 (0.591) - 19.5 (0.768) - 22.5 (0.886) - 29.0 (1.142) L (L2) All 25.4 (1.00) - 25.4 (1.00) - 25.4 (1.00) - 25.4 (1.00) - *L (L4) All 2.41 (0.095) 4.69 (0.185) 2.41 (0.095) 4.69 (0.185) 2.41 (0.095) 4.69 (0.185) 2.41 (0.095) 4.69 (0.185) Notes: 1. Measurements displayed in Millimeters (Inches in parentheses). 2. Standard lead space. 3. For in-line lead option L3, dimension e1 is “zero”. Straight lead form option L1 shown. *For information about bulk packaging quantities, please refer to the Ordering Notes section at the end of this document. © 2019 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 10/10/19 P P2 P2 P DP DP E DP DP DH DH Metal-Oxide Varistors (MOVs) E E DP DP DH DH DH DH DH DH Radial Lead Varistors > UltraMOV® Varistor Series C H0 H0 W0 W2 W1 W0 W2 W1 Db Db C SEATING PLANE SEATING PLANE H1 H1 C H0 H0 P P DP DP P2 P2 C SEATING PLANE SEATING PLANE H1 H1 E W0 W2 W1 W0 W2 W1 Db Db W W Tape Specifications for Reel and Ammo Pack Items W (Refer to dimensions on following page) DD0 W DD0 DD0 F 7mm Devices F P1 P1 P0 P0 DD0 t Crimped Leads "ZT" CRIMPED LEADS "L2" Crimped Leads "ZT" DP DH DP DP DH DH DP DPDH DP DP C SEATING PLANE H1 HH0 H H0 D0 H1 D0 H0 DD0 DD0 SEATING PLANE P1 P0 P1 P1 P0 P0 P1 P1 P0 P0 D0 Crimped Leads "L2" Crimped Straight Leads Leads "L2" "ZS" D0 Straight Leads "ZS" Crimped Leads "L2" P1 P2 P2 W0 W2 DP DP P P2 E DH DP DP H1 E H1 H Db Ho Ho H DD0 H DD0 DD0 DD0 P1 P0 P1 P0 In Line Leads "L3"P0 In Line Leads "L3"P0 P0 Under-crimped Leads "ZU" DD0 Under-crimped Leads "ZU" In Line LeadsP1"L3" P1 P1 P1 P2 P0 F t F t F t F t E P DP DP DP DP P DP DP P P2 H1 H1 H1 H1 DP DP H1 DH DH E H0 DD0 DD0 DD0 P1 In Line Leads "L3" InDD0 Line Leads "L3" Under-crimped Leads "ZU" P2 P Under-crimped P1 Leads "ZU" In Line Leads P2 "L3" P DP F b W D0H P1 P1 P0 P0 Straight Leads "L1" P0 Straight Leads "L1" F F W W W t t DP DP DP E E DH DP P DP H1 W2 H1 E W W0W2 W1 b W0W2 W1 W H D0 W DH DH DH b W D0 W1 W0 DH W0W2 W1 H D0H DH E DH b P1 P1 P0 P1 "L1" Straight Leads D0 Straight LeadsP0"L1" P1 t W0 W2 W1 W t t F t F b t F P0 t F P0 P1 t F D0 Straight Leads "L1" Straight LeadsP1"L1" D0 t F b W0 W2 W1 W0 W2 W1 W0 W2 W1 W t F H1 W1 W0 W W0 W2 W1 W0 W2 W1 t F Db P1 P0 P1 P0 P1 P0 P0 DP W2 H U DH W F b D0 E DH U P1P0 P2 W1 W0 DH DH DH DD0 DH W2 DH E Db Db Db DP W1 W0 DH E E Db Ho Ho H0 H H1 E E DH U UU H1 b t DP DH DP DH DPDH DH DP W Db H0 DH W2 H t t DH LEADS "L1" In Line LeadsP2"L3" STRAIGHT P DH DH H1 H DP P W W W W1 t F PDP P DP P DP DP W2 t F P0 DH E W W0 t F b P1 P0 P1 P0 P1 P1 P0 P0P0 W1 U DD0 H0 W1 W W W t F P P2 W2 W E STRAIGHT LEADS "L1" DH P2 In Line Leads "L3" H1 W0 t F Db P1 H1 W DD0 Db Db C b SEATING PLANE W2 W0 W2 W1 W0 W2 W1 W0 W2 W1 W0 W2 W1 W H1 W0 W2 W1 W0 W2 W1 W0 W2 W1 W U Db Db Db DH C DP W0 W2 W1 U U U W0 W2 W1 Db b P2 U DH DH E DH F Crimped Leads "L2" F D0 Crimped Leads "L2" Straight Leads P1 F P2 "ZS" INLINE LEADS "L3" P Straight "ZS" CrimpedLeads Leads "L2" DP P2 P0 P DP DH DH DH E SEATING PLANE P2 U H D0 H0 DD0 DD0 D0 DH DH DH W0 b Crimped LeadsP2P2"L2" DH E H1 H1 H1 H1 DH E DH DP DP DH DP DH DH P DP P DP DP P2 E t F PDP W t INLINE LEADS "L3" P DP W W W1 W W t F P0 W1 W t t F F F P W0 W2 t F b Crimped LeadsP2"L2" P2 W0 W2 W1 W0 W2 W1 W0 W2 W1 H1 H0 H1 H1 H0 H H H0 H1 D0 DH C SEATING PLANE H1 W1 DP DH E E E DPDH DP DH DP DH DH DP C SEATING PLANE H1 DH DH b C b Db Db C b SEATING PLANE E E DH DP P P2 DH E W0 W2 H0 H1 DH DH DH E DP P DP P DP P DP DP P2 P2 P2 DH C SEATING PLANE H1 H1 H1 DP P DP P2 E E E DH P P2 t P2 E P DP P DP P DP P DP P2 P2 P2 P2 t F F 10, 14 and 20mm Devices Crimped Leads "ZT" CRIMPED LEADS "L2" Crimped Leads "ZT" P P P2 P1 P1 P0 P0 t t F F W0W2 W1 W W t Straight Leads P0 "L1" Straight Leads "L1" © 2019 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 10/10/19 Metal-Oxide Varistors (MOVs) Radial Lead Varistors > UltraMOV® Varistor Series Tape Specifications for Reel and Ammo Pack Items (Refer to drawings on previous page) • • • • • • • • • Conforms to ANSI and EIA specifications. Can be supplied to IEC Publication 286-2. Radial devices on tape are offered with crimped leads, straight leads, or in-line leads. See Ordering Information. For 10mm devices 'P' (component pitch) is 12.7mm when 'F' (lead space) is 5mm. 7mm parts are available on tape and reel up to 460 VAC only 10mm parts are available on tape and reel up to 510 VAC only 14mm and 20mm parts are available on tape and reel up to 550 VAC only 7mm devices with 7.5mm lead spacing option will be taped at 25.4mm component pitch and 500 pieces per reel 10mm devices with 5.0mm lead spacing option will be taped at 12.7mm component pitch and 1000 pieces per reel Symbol Description B1 Component Top to Seating Plane C Crimp Length P Pitch of Component Model Size 7mm 10mm 14mm 20mm 15 Max 19.5 Max 22.5 Max 29 Max 2.4 Typ 2.6 Typ 2.6 Typ 2.6 Typ 12.7 +/- 1.0 25.4 +/- 1.0 25.4 +/- 1.0 25.4 +/- 1.0 P0 Feed Hole Pitch 12.7 +/- 0.2 12.7 +/- 0.2 12.7 +/- 0.2 12.7 +/- 0.2 P1 Feed Hole Center to Pitch 3.85 +/- 0.7 8.85 +/- 0.7 8.85 +/- 0.7 7.70 +/- 0.7 P2 Hole Center to Component Center 6.35 +/- 0.7 12.7 +/- 0.7 12.7 +/- 0.7 12.7 +/- 0.7 F Lead to Lead Distance 5.0 +/- 0.8 7.5 +/- 0.8 7.5 +/- 0.8 10.0 +/- 0.8 Δh Component Alignment W Tape Width W0 Hold Down Tape Width W1 Hole Position W2 Hold Down Tape Position 2.0 Max 2.0 Max 2.0 Max 2.0 Max 18.0 +1.0 / -0.5 18.0 +1.0 / -0.52 18.0 +1.0 / -0.5 18.0 +1.0 / -0.5 12.0 +/- 0.3 12.0 +/- 0.3 12.0 +/- 0.3 12.0 +/- 0.3 9.0 +0.75 / -0.50 9.0 +0.75 / - 0.50 9.0 +0.75 / 0.50 9.0 +0.75 / -0.50 0.5 Max 0.5 Max 0.5 Max 0.5 Max 18.0 +2.0 / -0.0 18.0 +2.0 / -0.0 18.0 +2.0 / -0.0 18.0 +2.0 / -0.0 16.0 +/- 0.5 16.0 +/- 0.5 16.0 +/- 0.5 16.0 +/- 0.5 H Height from Tape Center to Component Base H0 Seating Plane Height H1 Component Height 32.0 Max 36.0 Max 40.0 Max 46.5 Max D0 Feed Hole Diameter 4.0 +/- 0.2 4.0 +/- 0.2 4.0 +/- 0.2 4.0 +/- 0.2 t Total Tape Thickness Δp Component Alignment 0.7 +/- 0.2 0.7 +/- 0.2 0.7 +/- 0.2 0.7 +/- 0.2 3° Max, 1.00mm 3° Max, 1.00mm 3° Max, 1.00mm 3° Max, 1.00mm *For information on tape and reel packaging quantities, please refer to the Ordering Notes section at the end of this document. Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics. © 2019 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 10/10/19 Metal-Oxide Varistors (MOVs) Radial Lead Varistors > UltraMOV® Varistor Series Part Numbering System BASE PART CODES (See Ratings & Specifications tables and notes below) V XX E XXX P OPTION CODES (See notes below) LX X X XXXXX For “VARISTOR” OTHER NONSTANDARD OPTIONS X2855: Nickel barrier coated wire option (see notes below) DISC DIAMETER: 07, 10, 14, or 20 (mm) NONSTANDARD LEAD SPACING OPTIONS: Blank: Standard lead spacing (see Dimensions 5: 5mm Lead Spacing 7: 7.5mm Lead Spacing 1: 10mm Lead Spacing ENCAPSULATION: E = Epoxy P = Phenolic (Halogen Free) VM(A C)RMS : 130 to 625 (V) LEAD-FREE, HALOGEN-FREE AND RoHS COMPLIANT INDICATOR UltraMO V™ is a trademark of Littelfuse, Inc. Ta ble) PACKAGING: B: Bulk P a ck T : Tape and Reel A: Ammo P a ck LEAD L1: L2: L3: L4: FORMATION: Straight Crimped In-Line Trim/Cr imp (Bulk pac k only) Ordering Notes: For standard parts, use the BASE PART designator only. For parts with non-standard options (such as additional form, packaging and lead space options) use, BASE PART + OPTION CODE. OPTION CODE items are subject to availability and minimum order requirements. Please contact a Littelfuse representative if you require additional information PACKAGING: Littelfuse UltraMOV® varistors are shipped standard in bulk pack with straight leads and lead spacing outlined in the dimensions sections of this document. Contact a Littelfuse representative to discuss non-standard options. Standard Part Default Conditions Device Size Part # Lead Space Packaging OPTION CODES: 7mm V07E– 5.0-/+1 Bulk 10mm V10E– 7.5-/+1 Bulk X2855: Nickel Barrier COATED WIRE OPTION 14mm V14E– 7.5-/+1 Bulk 20mm V20E– 10.0-/+1 Bulk All standard parts use tinned copper clad steel wire. Nickel Barrier Coated Wire is available as an option, consisting of Copper Wire with a flashing of Nickel followed by a top coating of Tin. To order: append standard model BASE PART number with "X2855." Example: Standard Model Order As V20E320P V20E320PX2855 Standard Bulk Pack Quantity Varistor Voltage Standard Bulk Pack Quantity Varistor Model Size 7mm 10mm 14mm 20mm 130 – 275 1500 1000 700 500 300 – 460 1500 700 600 400 510 – 625 1500 700 500 400 Tape & Reel Quantity Shipping Quantity Per Reel Varistor Voltage 7mm 10mm 14mm 20mm 130 – 275 1000 500 500 500 300 – 625 1000 500 400 400 Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics. © 2019 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 10/10/19 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Littelfuse: V14P275P V14P150P V07P420P V14E275L1T1 V10E320L2T V10E320PL2T V14P300L1T V14P300PL1T V07E130P V07E150 V07E150P V07E300L2B5 V07E300P V07E385 V07P385L2T5 V07E140L1T V10E130P V10E320 V14P150 V10E275 V20E460 V20E550 V07E300 V14E150L1T V14E300 V14E320L2B V20E150L1T7 V20E510L2T7 V14E385L1T5 V20E625L2T1 V14E130L2A V14E230 V14E320L2T V20E275P V10E250 V10E385 V14E320 V20E175 V20E250L2B1 V20E440P V14E130 V20E275L4B7 V20E625L3T7 V10E300L2T7 V10E460P V10E510P V14E150L2B V20E320L4B V20E550L4B7 V14E150L4B V20E320P V20E625L4B V20E320 V07E130L3T V07E440P V10E275L1B5 V10E300P V20E150L1T V07P420L2T V20E175P V20E230L1B1 V10E250P V14E300P V14P275L1T V20E150L4B7 V20E300P V20E510 V20E550L1T7 V07E130L1T V10E275L2B V10E250L1B5 V10E420P V14E230P V20E420L1T V20E550L4B V10E130 V10E140P V10E385P V10E625L1B5 V14E385 V20E320L1B7 V20E320L2B V14E150 V14E275 V14E385L2T V14E460P V20E275L1T7 V20E320L1T7 V20E625P V07E275P V10E150P V20E140L1B7 V20E385L2T1 V20E440 V20E150L2B7 V20E150L2T1 V14E130P V14E175 V14E275L2B V14E625