HMS51232J4V-15

HANBit HMS51232J4V HAN BIT SRAM MODULE 2Mbyte (512Kx32Bit), 68-Pin JLCC Packaging,3.3V Part No. HMS51232J4V GENERAL DESCRIPTION The HMS51232J4V is a static random access memory (SRAM) module containing 524,288 words organized in a x32-bit configuration. The module consists of four 512K x 8 SRAMs mounted on a 68-pin, single-sided, FR4printed circuit board. Four chip enable inputs, (/CE1, /CE2, /CE3 and /CE4) are used to enable the module’s 4 bytes independently. Output enable (/OE) and write enable (/WE) can set the memory input and output. Data is written into the SRAM memory when write enable (/WE) and chip enable (/CE) inputs are both LOW. Reading is accomplished when /WE remains HIGH and /CE and output enable (/OE) are LOW. For reliability, this SRAM module is designed as multiple power and ground pin. All module components may be powered from a single +3.3V DC power supply and all inputs and outputs are fully LVTTL-compatible.. FEATURES Š Access time : 15, 17, 20 and 25ns Š High-density 2MByte design Š High-reliability, low-power design Š Single +3V ±0.3V power supply Š Three state output and LVTTL-compatible Š FR4-PCB design Š Low profile 68-Pin JLCC kxX] hX_ PIN ASSIGNMENT Vjl[ VjlZ VjlY VjlX V~l hX] hX\ hX[ kxX\ \` \_ \^ \] \\ \[ \Z \Y \X \W [` [_ [^ [] [\ hX^ OPTIONS Š Timing 15ns access 17ns access 20ns access 25ns access MARKING -15 -17 -20 -25 kxX^ kxX_ kxX` }šš kxYW kxYX kxYY kxYZ }ŠŠ kxY[ kxY\ kxY] kxY^ }šš kxY_ kxY` kxZW XW ` _ XX XY XZ X[ X\ X] X^ X_ X` YW YX YY YZ Y[ Y\ ^ ] \ [ Z Y X uj uj Vvl uj }ŠŠ ]_ ]^ ]] ]\ ][ ]Z ]Y ]X ]W [[ Y] Y^ Y_ Y` ZW ZX ZY ZZ Z[ Z\ Z] Z^ Z_ Z` [W [X [Y [Z kxX[ kxXZ kxXY }šš kxXX kxXW kx` kx_ }ŠŠ kx^ kx] kx\ kx[ }šš kxZ kxY kxX Š Packages 68-pin JLCC J 1 kxZX h] h\ h[ hZ hY hX hW }ŠŠ hXZ hXY hXX hXW h` h_ h^ kxW 68-Pin JLCC TOP VIEW HANBit Electronics Co.,Ltd. HANBit PIN DESCRIPTION DQ0 – DQ31 A0 – A18 Data Inputs/Outputs Address Inputs Write Enable Chip Selects Output Enable Power Supply Ground HMS51232J4V /WE /CE1-4 /OE Vcc Vss BLOCK DIAGRAM /CS1 /WE /OE A0-18 /CS2 /CS3 /CS4 512Kx8 512Kx8 512Kx8 512Kx8 8 8 8 8 DQ0-7 DQ8-15 DQ16-23 DQ24-31 TRUTH TABLE MODE STANDBY NOT SELECTED READ WRITE /OE X H L X /CE H L L L /WE X H H L DQ HIGH-Z HIGH-Z Dout Din POWER STANDBY ACTIVE ACTIVE ACTIVE 2 HANBit Electronics Co.,Ltd. HANBit ABSOLUTE MAXIMUM RATINGS PARAMETER Voltage on Any Pin Relative to Vss Voltage on Vcc Supply Relative to Vss Power Dissipation Storage Temperature SYMBOL VIN,OUT VCC PD TSTG HMS51232J4V RATING -0.5V to +4.6V -0.5V to +4.6V 4W -65oC to +150oC Operating Temperature TA 0oC to +70oC Š Stresses greater than those listed under " Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operating section of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability. RECOMMENDED DC OPERATING CONDITIONS PARAMETER Supply Voltage Ground Input High Voltage Input Low Voltage * SYMBOL VCC VSS VIH VIL MIN 3.0V 0 2.0 -0.5* ( TA=0 to 70 o C ) TYP. 3.3V 0 MAX 3.6V 0 Vcc+0.3V** 0.8V VIL(Min.) = -2.0V (Pulse Width ≤ 10ns) for I ≤ 20 mA ** VIH(Min.) = Vcc+2.0V (Pulse Width ≤ 10ns) for I ≤ 20 mA DC AND OPERATING CHARACTERISTICS (1) (0oC ≤ TA ≤ 70 oC ; Vcc = 3.3V ± 0.3V, Unless otherwise specified) PARAMETER Input Leakage Current Output Leakage Current Output High Voltage Output Low Voltage * Vcc=3.3V, Temp=25 oC TEST CONDITIONS VIN = Vss to Vcc /CE=VIH or /OE =VIH or /WE=VIL VOUT=Vss to VCC IOH = -4.0mA IOL = 8.0mA SYMBO L ILI IL0 VOH VOL MIN -2 -2 2.4 0.4 MAX 2 2 UNITS µA µA V V DC AND OPERATING CHARACTERISTICS (2) MAX DESCRIPTION Power Supply Current:Operating Power Supply Current:Standby TEST CONDITIONS Min. Cycle, 100% Duty /CE=VIL, VIN=VIH or VIL, IOUT=0mA Min. Cycle, /CE=VIH f=0MHZ, /CE≥VCC-0.2V, VIN≥ VCC-0.2V or VIN≤0.2V SYMBOL lCC lSB lSB1 -10 205 50 10 -12 200 50 10 -15 195 50 10 UNIT mA mA mA 3 HANBit Electronics Co.,Ltd. HANBit CAPACITANCE DESCRIPTION Input /Output Capacitance Input Capacitance TEST CONDITIONS VI/O=0V VIN=0V SYMBOL CI/O CIN HMS51232J4V MAX 8 7 UNIT pF pF * NOTE : Capacitance is sampled and not 100% tested AC CHARACTERISTICS (0oC ≤ TA ≤ 70 oC ; Vcc = 3.3V ± 0.3V, unless otherwise specified) TEST CONDITIONS PARAMETER Input Pulse Level Input Rise and Fall Time Input and Output Timing Reference Levels Output Load VALUE 0 to 3V 3ns 1.5V See below Output Load (A) VL=1.5V 50Ω DOUT Z0=50Ω 30pF DOUT 353Ω Output Load (B) for tHZ, tLZ, tWHZ, tOW, tOLZ & tOHZ +3.3V 319Ω 5pF* READ CYCLE -10 PARAMETER Read Cycle Time Address Access Time Chip Select to Output Output Enable to Output Chip Enable to Low-Z Output Output Enable to Low-Z Output Chip Disable to High-Z Output Output Disable to High-Z Output SYMBOL MIN MAX MIN MAX MIN MAX -12 -15 UNIT tRC tAA tCO tOE tLZ tOLZ tHZ tOHZ 10 3 0 0 0 10 10 5 5 5 12 3 0 0 0 12 12 6 6 6 15 3 0 0 0 15 15 7 7 7 ns ns ns ns ns ns ns ns 4 HANBit Electronics Co.,Ltd. HANBit Output Hold from Address Change Chip Select to Power Up Time Chip Select to Power Down Time tOH tPU tPD 3 0 15 3 0 12 HMS51232J4V 3 0 15 ns ns ns WRITE CYCLE -10 SYMBOL MIN MAX MIN MAX MIN MAX PARAMETER Write Cycle Time Chip Select to End of Write Address Set-up Time Address Valid to End of Write Write Pulse Width (/OE High) Write Pulse Width (/OE Low) Write Recovery Time Write to Output High-Z Data to Write Time Overlap Data Hold from Write Time End of Write to Output Low-Z -12 -15 UNIT tWC tCW tAS tAW tWP tWP1 tWR tWHZ tDW tDH tOW 10 7 0 7 7 10 0 0 5 0 3 5 - 12 8 0 8 8 12 0 0 6 0 3 6 - 10 10 0 10 10 15 0 0 7 0 3 7 - ns ns ns ns ns ns ns ns ns ns ns TIMING DIAGRAMS See Part No. HMS51232M4/Z4 FUNCTIONAL DESCRIPTION /CE H L L L /WE X* H H L /OE X H L X MODE Not Select Output Disable Read Write I/O PIN High-Z High-Z DOUT DIN SUPPLY CURRENT I SB, I SB1 ICC ICC ICC Note: X means Don't Care 5 HANBit Electronics Co.,Ltd. HANBit HMS51232J4V PACKAGE DIMMENSIONS 24.71±0.25mm 4.30±0.20mm 0.46±0.20mm 23.44±0.25mm 1.278±0.20mm 6 HANBit Electronics Co.,Ltd. HANBit HMS51232J4V ORDERING INFORMATION 1 2 3 4 5 6 7 8 HMS HANBit Memory Modules SRAM 5 12 32 J 4V-15 15ns Access Time Component, 3.3V JLCC x32bit 512K 1. - Product Line Identifier HANBit ------------------------------------------------------ H 2. - Memory Modules 3. - SRAM 4. - Depth : 512K 5. - Width : x 32bit 6. - Package Code JLCC ------------------------------------------------------- J 7. - Number of Memory Components-----4, 3.3V-------V 8. - Access time 15 ----------------------------------------------------------- 15ns 17 ----------------------------------------------------------- 17ns 20 ----------------------------------------------------------- 20ns 25 ----------------------------------------------------------- 25ns 7 HANBit Electronics Co.,Ltd.