M55-7013242R

Customer Information Sheet IF IN DOUBT - ASK DRAWING No.: M55-70XXX42R NOT TO SCALE C THIRD ANGLE PROJECTION ALL DIMENSIONS IN mm DIM 'F' SPECIFICATIONS: MATERIAL: MOULDING & CAP = HIGH TEMP, LCP, UL94V-0 CONTACT = PHOSPHOR BRONZE RETAINING STRAP = BRASS PLATING: CONTACT = 0.025µm MIN GOLD OVER 2.03µm MIN NICKEL ON CONTACT AREA, 2.54µm MIN TIN OVER 1.27µm MIN NICKEL ON TAILS RETAINING STRAP = 2.45µm MIN TIN OVER 1.01µm MIN NICKEL DIM 'D' DIM 'C' 1.27 TYP CAP HAS BEEN HIDDEN FOR ILLUSTRATION PURPOSES ONLY. SEE NOTE 1 CONTACT A1 ORDER CODE: DIM 'B' M55-70XXX42R 4.20 CONNECTOR HEIGHT: 0 = 6.75mm 1 = 8.25mm 2 = 9.85mm 3.25 DIM 'A' 1.27 PART SECTION X-X DIM 'G' TOTAL No. OF CONTACTS: 12, 16, 20, 26, 32, 40, 50, 68, 80 5.00 4.00 SEE NOTE 1 0.30 0.02 0.10 12 - 50 CONTACTS 0.75 0.15 68 - 80 CONTACTS DIM 'E' 1.50 0.05 5.80 7.20 1.00 0.05 TYP 1.50 0.05 NOTES: 1. SEE ORDER CODE AND SHEET 5 FOR CONNECTOR HEIGHT AND CAP DETAILS. SEE SHEET 7 FOR RECOMMENDED PCB LAYOUTS. 2. FOR TAPE AND REEL DETAILS, SEE SHEET 6. 3. ALL TOLERANCES ARE 0.20, UNLESS OTHERWISE STATED. 4. COMPLETE SPECIFICATION PLEASE SEE COMPONENT SPECIFICATION C047XX (LATEST ISSUE). 0.50 0.05 TYP www.harwin.com technical @harwin.com PART No. DIM 'A' DIM 'B' M55-70X1242R 12.70 8.57 6.35 9.57 10.77 11.34 10.37 M55-70X1642R 15.24 11.11 8.89 12.11 13.31 13.88 12.91 M55-70X2042R 17.78 13.65 11.43 14.65 15.85 16.42 15.45 NAME ISS. M55-70X2642R 21.59 17.46 15.24 18.46 19.66 20.23 19.26 APPROVED: M55-70X3242R 25.40 21.27 19.05 22.27 23.47 24.04 23.07 CHECKED: M55-70X4042R 30.48 26.35 24.13 27.35 28.55 29.12 28.15 DRAWN: M55-70X5042R 36.83 32.70 30.48 33.70 34.90 35.47 34.50 CUSTOMER REF.: M55-70X6842R 48.26 44.13 41.91 45.13 46.33 46.90 45.93 M55-70X8042R 55.88 51.75 49.53 52.75 53.95 54.52 53.55 THIS DRAWING AND ANY INFORMATION OR DESCRIPTIVE MATTER SET OUT HEREON ARE CONFIDENTIAL AND COPYRIGHT PROPERTY OF THE HARWIN GROUP AND MUST NOT BE DISCLOSED, LOANED, COPIED OR USED FOR MANUFACTURING, TENDERING OR FOR ANY OTHER PURPOSE WITHOUT THEIR WRITTEN PERMISSION. DIM 'C' TOLERANCES X. X.X X.XX X.XXX = = = = 1mm 0.50mm 0.20mm 0.01mm ANGLES = DIM 'D' DIM 'E' DIM 'F' MATERIAL: S/AREA: 7 13.07.22 31688 DATE CN/CO MGP MR M.PERREN ASSEMBLY DRG: 1.27mm PITCH VERTICAL MALE CONNECTOR DRAWING NUMBER: SEE ABOVE 5 UNLESS STATED MGP TITLE: SEE ABOVE FINISH: DIM 'G' mm² M55-70XXX42R SHT 4 OF 7 Customer Information Sheet IF IN DOUBT - ASK DRAWING No.: M55-70XXX42R NOT TO SCALE C THIRD ANGLE PROJECTION ALL DIMENSIONS IN mm CONNECTOR HEIGHT DETAILS M55-700XX42R 5.90 8.00 8.00 6.75 M55-701XX42R 5.90 8.00 9.50 8.25 M55-702XX42R 5.90 8.00 MGP 7 NAME ISS. 11.10 APPROVED: 9.85 CHECKED: 13.07.22 31688 DATE CN/CO MGP MR DRAWN: M.PERREN CUSTOMER REF.: ASSEMBLY DRG: NOTES: 1. ALL TOLERANCES ARE 0.20, UNLESS OTHERWISE STATED. www.harwin.com technical @harwin.com THIS DRAWING AND ANY INFORMATION OR DESCRIPTIVE MATTER SET OUT HEREON ARE CONFIDENTIAL AND COPYRIGHT PROPERTY OF THE HARWIN GROUP AND MUST NOT BE DISCLOSED, LOANED, COPIED OR USED FOR MANUFACTURING, TENDERING OR FOR ANY OTHER PURPOSE WITHOUT THEIR WRITTEN PERMISSION. TOLERANCES X. X.X X.XX X.XXX = = = = 1mm 0.50mm 0.20mm 0.01mm ANGLES = MATERIAL: TITLE: 1.27mm PITCH VERTICAL MALE CONNECTOR SEE SHEET 4 FINISH: DRAWING NUMBER: SEE SHEET 4 5 UNLESS STATED S/AREA: mm² M55-70XXX42R SHT 5 OF 7 Customer Information Sheet IF IN DOUBT - ASK DRAWING No.: M55-70XXX42R NOT TO SCALE C TAPE DETAILS FOR 12 & 16 CONTACTS ONLY THIRD ANGLE PROJECTION 12.00 TYP 12.00 TYP 1.75 4.00 TYP TAPE DETAILS FOR 20 TO 80 CONTACTS ONLY 2.00 TYP 4.00 TYP 1.75 2.00 TYP ALL DIMENSIONS IN mm 1.50 TYP 1.50 TYP DIM 'B' DIM 'B' DIM 'C' DIM 'A' DIM 'C' DIM 'A' DIM 'D' SECTION X-X SECTION X-X SEE DETAIL ' A' DIM 'E' DIM 'F' DIM 'E' SECTION ORDER CODE: Y-Y DIM 'F' FINISHED REELING DIRECTION M55-70XXX42R CONNECTOR HEIGHT: 0 = 6.75mm 1 = 8.25mm 2 = 9.85mm SECTION 1.50 TYP TABLE 1 DIMENSION TOTAL No. OF CONTACTS: 12, 16, 20, 26, 32, 40, 50, 68, 80 PART No. M55-70X1242R 100 MIN Y-Y 300 M55-70X1642R M55-70X2042R ROUND HOLES THIS SIDE REEL DETAILS DIM 'B' DIM 'C' 0.15 DIM 'D' 24.00 11.50 12.90 N/A 32.00 M55-70X3242R 18.00 44.00 20.20 21.79 M55-70X6842R 56.00 26.20 72.00 34.20 +0.5 -0.2 www.harwin.com technical @harwin.com 37.03 48.46 56.08 THIS DRAWING AND ANY INFORMATION OR DESCRIPTIVE MATTER SET OUT HEREON ARE CONFIDENTIAL AND COPYRIGHT PROPERTY OF THE HARWIN GROUP AND MUST NOT BE DISCLOSED, LOANED, COPIED OR USED FOR MANUFACTURING, TENDERING OR FOR ANY OTHER PURPOSE WITHOUT THEIR WRITTEN PERMISSION. APPROVED: 40.40 PART No. 68.40 CHECKED: DIMENSION DRAWN: PACK QTY DIM 'F' 8.3 9.5 500 M55-701XX42R 9.8 11.0 450 M55-702XX42R 11.4 12.6 300 TOLERANCES = = = = TABLE 2 DIM 'E' M55-700XX42R 52.40 X. X.X X.XX X.XXX 7 NAME ISS. 28.40 M55-70X4042R M55-70X8042R NOTES: 1. PRODUCT IS TAPE AND REELED IN GENERAL ACCORDANCE WITH EIA-481 (ELECTRONIC INDUSTRIES ASSOCIATION). 2. FOR CONNECTOR DETAILS, SEE SHEET 4 & 5. 14.20 MGP DETAIL 'A' 1.70 TYP M55-70X2642R M55-70X5042R 13.0 DIM 'A' 0.30 1mm 0.50mm 0.20mm 0.01mm ANGLES = MATERIAL: S/AREA: CN/CO MGP MR M.PERREN CUSTOMER REF.: ASSEMBLY DRG: 1.27mm PITCH VERTICAL MALE CONNECTOR DRAWING NUMBER: SEE SHEET 4 5 UNLESS STATED 31688 DATE TITLE: SEE SHEET 4 FINISH: 13.07.22 mm² M55-70XXX42R SHT 6 OF 7 Customer Information Sheet IF IN DOUBT - ASK DRAWING No.: M55-70XXX42R NOT TO SCALE C THIRD ANGLE PROJECTION ALL DIMENSIONS IN mm ROUND AND POLARIZED RECOMMENDED PCB LAYOUTS OPTIONS RECOMMENDED ROUND HOLE PCB LAYOUT TOLERANCE = 0.05 RECOMMENDED POLARIZED HOLE PCB LAYOUT TOLERANCE = 0.05 DIM 'F' 1.20 DIM 'F' DIM 'C' 1.20 DIM 'C' 1.27 TYP 1.27 TYP R0.50 1.90 2 x 7.60 1.65 5.50 2.20 7.60 1.95 1.65 2.20 1.00 5.50 CONTACT A1 R0.825 1.10 0.285 1.10 0.285 0.80 TYP 2.21 2.21 0.80 TYP DIM 'E2' DIM 'E1' PART No. ORDER CODE: M55-70XXX42R CONNECTOR HEIGHT: 0 = 6.75mm 1 = 8.25mm 2 = 9.85mm TOTAL No. OF CONTACTS: 12, 16, 20, 26, 32, 40, 50, 68, 80 www.harwin.com technical @harwin.com THIS DRAWING AND ANY INFORMATION OR DESCRIPTIVE MATTER SET OUT HEREON ARE CONFIDENTIAL AND COPYRIGHT PROPERTY OF THE HARWIN GROUP AND MUST NOT BE DISCLOSED, LOANED, COPIED OR USED FOR MANUFACTURING, TENDERING OR FOR ANY OTHER PURPOSE WITHOUT THEIR WRITTEN PERMISSION. DIM 'C' DIM 'E1' DIM 'E2' DIM 'F' M55-70X1242R 6.35 10.77 10.70 11.34 M55-70X1642R 8.89 13.31 13.24 13.88 M55-70X2042R 11.43 15.85 15.78 16.42 M55-70X2642R 15.24 19.66 19.59 20.23 M55-70X3242R 19.05 23.47 23.40 24.04 M55-70X4042R 24.13 28.55 28.48 29.12 M55-70X5042R 30.48 34.90 34.83 35.47 M55-70X6842R 41.91 46.33 46.26 46.90 M55-70X8042R 49.53 53.95 53.88 54.52 TOLERANCES X. X.X X.XX X.XXX = = = = 1mm 0.50mm 0.20mm 0.01mm ANGLES = MATERIAL: S/AREA: APPROVED: CHECKED: 13.07.22 31688 DATE CN/CO MGP MR DRAWN: M.PERREN CUSTOMER REF.: ASSEMBLY DRG: 1.27mm PITCH VERTICAL MALE CONNECTOR DRAWING NUMBER: SEE ABOVE 5 UNLESS STATED 7 TITLE: SEE ABOVE FINISH: MGP NAME ISS. mm² M55-70XXX42R SHT 7 OF 7