S1941-46R

Customer Information Sheet DRAWING No.: S1941-XXR (3.49) NOT TO SCALE C IF IN DOUBT - ASK 20.00 TYP 4.60 THIRD ANGLE PROJECTION ALL DIMENSIONS IN mm 2.00 TYP 4.00 TYP 1.75 1.50 +0.10 TYP 0 5.70 11.50 24.00 0.30 RECOMMENDED PCB PAD LAYOUT NOTES: 1. QUANTITY OF COMPONENTS PER REEL = 350. 2. THIS PRODUCT IS TAPED AND REELED IN ACCORDANCE WITH EIA-481 (ELECTRONICS INDUSTRIES ASSOCIATION). SECTION Y-Y 3.50 PICK AND PLACE AREA 3.5 0.3 GOLD PLATING AREA (42 FINISH ONLY) 3.50 7.70 0.80 4.45 SECTION X-X FINISHED REELING DIRECTION ORDER CODE: 7.45 7.15 5.53 3.63 5.70 (0.15) R1.00 TYP 6.75 S1941-XXR FINISH: 42 - SELECTIVE GOLD & TIN 46 - 100% TIN ALL OVER 24.4 +2.0 0 330 6.1 0.3 TIN PLATING AREA (42 FINISH ONLY) RTP 4 x R0.50 COMPONENT DETAILS 9.85 9.45 3.00 4.60 100 MIN 2.30 2 x R0.75 14.01.22 31314 NAME ISS. DATE APPROVED: R.PORTLOCK CN/CO CHECKED: M.RUDKIN DRAWN: S.BENNETT CUSTOMER REF.: 13.0 REEL DETAILS 1.50 9 www.harwin.com technical @harwin.com THIS DRAWING AND ANY INFORMATION OR DESCRIPTIVE MATTER SET OUT HEREON ARE CONFIDENTIAL AND COPYRIGHT PROPERTY OF THE HARWIN GROUP AND MUST NOT BE DISCLOSED, LOANED, COPIED OR USED FOR MANUFACTURING, TENDERING OR FOR ANY OTHER PURPOSE WITHOUT THEIR WRITTEN PERMISSION. TOLERANCES X. X.X X.XX X.XXX = = = = 1mm 0.50mm 0.20mm 0.01mm ANGLES = 5 UNLESS STATED MULTI-DIRECTIONAL SHIELD FINGER IN TAPE AND REEL SEE ABOVE S/AREA: ASSEMBLY DRG: TITLE: MATERIAL: FINISH: +0.5 -0.2 DRAWING NUMBER: SEE ABOVE mm² S1941-XXR SHT 2 OF 3 Customer Information Sheet IF IN DOUBT - ASK DRAWING No.: S1941-XXR NOT TO SCALE C S1941-46R DEFLECTION FROM ABOVE 0.30 THIRD ANGLE PROJECTION ALL DIMENSIONS IN mm S1941-46R DEFLECTION FROM FRONT 0.80 1.00 0.40 RECOMMENDED VERTICAL WORKING DEFLECTION = 0.30mm, MINIMUM FORCE OF 1.2N RECOMMENDED HORIZONTAL WORKING DEFLECTION = 0.40mm, MINIMUM FORCE OF 1.2N MAXIMUM RECOMMENDED DEFLECTION = 0.80mm MAXIMUM RECOMMENDED DEFLECTION = 1.00mm COMPONENT SPECIFICATION: MATERIAL = BERYLLIUM COPPER FINISH: 42 = 2µm NICKEL ALL OVER, 0.15µm GOLD ON CONTACT AREA, 3µm 100% TIN ON BASE 46 = 3µm 100% TIN OVER 2µm NICKEL ELECTRICAL: CURRENT RATING = 9A MAX CONTACT RESISTANCE = 20m MAX MECHANICAL: DURABILITY = 5000 CYCLES www.harwin.com technical @harwin.com THIS DRAWING AND ANY INFORMATION OR DESCRIPTIVE MATTER SET OUT HEREON ARE CONFIDENTIAL AND COPYRIGHT PROPERTY OF THE HARWIN GROUP AND MUST NOT BE DISCLOSED, LOANED, COPIED OR USED FOR MANUFACTURING, TENDERING OR FOR ANY OTHER PURPOSE WITHOUT THEIR WRITTEN PERMISSION. RTP = = = = DATE CN/CO APPROVED: R.PORTLOCK CHECKED: M.RUDKIN DRAWN: S.BENNETT ASSEMBLY DRG: 1mm 0.50mm 0.20mm 0.01mm ANGLES = 14.01.22 31314 CUSTOMER REF.: TOLERANCES X. X.X X.XX X.XXX 9 NAME ISS. 5 UNLESS STATED TITLE: MATERIAL: MULTI-DIRECTIONAL SHIELD FINGER IN TAPE AND REEL SEE ABOVE FINISH: S/AREA: DRAWING NUMBER: SEE ABOVE mm² S1941-XXR 3 SHT OF 3