Ribbon Cable Connector
HIF4 Series
sFeatures
1. Current Capacity
The HIF4 series connector is capable of 3 A current capacity used for wider applications, while the HIF3 series uses 1 A capacity.
2. Full Lock Mechanism
This connector is equipped with a Hirose original locking mechanism, and guarantees excellent reliability for vibration and shock.
3. One-touch Insertion and Extraction Mechanism
This connector is equipped with levers for automatic insertion and extraction, as soon as lock is reset. Insertion and extraction tools are not required.
4. Applicable Cable
The applicable cable is UL2651 AWG#24 flat cable (7 cores./0.203mm, jacket dia :1.0 to 1.2mm).
sApplications
Computers, terminal equipment, various kinds of electronic equipment, and office automation machines
sProduct Specifications
Rating Current rating : 3A Operating Temperature Range : –55 to +85ç (Note 1) Storage Temperature Range : –10 to +60ç (Note 2) Storage Humidity Range : 40 to 70% (Note 2) Condition 500V DC 1000V AC/1 minute 0.1A Voltage rating : 300V AC Operating Moisture Range : 40 to 80% Item 1. Insulation Resistance 2. Withstanding voltage 3. Contact Resistance 4. Vibration 1000M ohms min Specification
No flashover or insulation breakdown.
15m ohms max
No electrical discontinuity of 1µs or more
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 96 hours at temperature of 40ç and humidity of 90% to 95%
(-65ç: 30 minutes ➝ 15 to 35ç: 5 minutes max. 125ç: 30 minutes ➝ 15 to 35ç: 5 minutes max.) 5 cycles 500 cycles
5. Humidity (Steady state) Insulation resistance: 1000M ohms min. 6. Temperature Cycle 7. Operating Life
No damage, cracks, or parts looseness.
Contact resistance: 15m ohms max.
8. Resistance to Soldering heat No deformation of components affecting performance.
Flow: 260ç for 10 seconds Manual soldering: 300ç for 3 seconds
Note 1: Includes temperature rise caused by current flow. Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
sMaterial
Part Insulator Contact Socket Pin header Material PBT Beryllium copper Phosphor bronze Finish Black gold plated gold plated Remarks UL94V-0 –––––––
B2
sOrdering Information
qPin Header
HIF4 - * P - 3.18 DS
q w e : HIF4 r t q Series Name e P : Pin header r Contact Pitch t Contact Type DS : Right angle type SA : Straight dip type W : Wrapping type : 3.18mm
w Number of Contacts : 16, 20, 26, 34, 40
qSocket
HIF4 - * D - 3.18 R
q w e : HIF4 : D : Double : 3.18mm : Ribbon cable r t q Series Name e Contact alignment r Contact Pitch t Connection type
w Number of Contacts : 16, 20, 26, 34, 40
B3
sSocket
Unit:mm Part Number HIF4-16D-3.18R HIF4-20D-3.18R HIF4-26D-3.18R HIF4-34D-3.18R HIF4-40D-3.18R CL No. 563-0025-5 563-0010-8 563-0011-0 563-0012-3 563-0029-6 Number of Contacts 16 20 26 34 40 A 31.98 38.34 47.88 60.60 70.14 B 22.26 28.62 38.16 50.88 60.42 C 26.28 32.64 42.18 54.90 64.44
sPin Header Right Angle Type
Unit:mm Part Number HIF4-16P-3.18DS HIF4-20P-3.18DS HIF4-26P-3.18DS HIF4-34P-3.18DS HIF4-40P-3.18DS CL No. 563-0026-8 563-0001-7 563-0002-0 563-0003-2 563-0030-5 Number of Contacts 16 20 26 34 40 A 46.68 53.04 62.58 75.30 84.84 B 32.18 38.54 48.08 60.80 70.34 C 22.26 28.62 38.16 50.88 60.42 D
42.82 63.28 49.18 69.64 58.72 79.18 71.44 91.90 80.89 101.44
E 39.98 46.34 55.88 68.60 78.14
F 33.58 39.94 49.48 62.20 71.74
B4
sPin Header Straight Through hole Type
Unit:mm Part Number HIF4-16P-3.18DSA HIF4-20P-3.18DSA HIF4-26P-3.18DSA HIF4-34P-3.18DSA HIF4-40P-3.18DSA CL No. 563-0027-0 563-0004-5 563-0005-8 563-0006-0 563-0031-8 Number of Contacts 16 20 26 34 40 A 46.68 53.04 62.58 75.30 84.84 B 32.18 38.54 48.08 60.80 70.34 C 22.26 28.62 38.16 50.88 60.42 D
42.82 63.28 49.18 69.64 58.72 79.18 71.44 91.90 80.98 101.44
E 39.98 46.34 55.88 68.60 78.14
F 33.58 39.94 49.48 62.20 71.74
sPin Header Wrapping Type
Unit:mm Part Number HIF4-16P-3.18W HIF4-20P-3.18W HIF4-26P-3.18W HIF4-34P-3.18W HIF4-40P-3.18W CL No. 563-0028-3 563-0007-3 563-0008-6 563-0009-9 563-0032-0 Number of Contacts 16 20 26 34 40 A 46.68 53.04 62.58 75.30 84.84 B 32.18 38.54 48.04 60.80 70.34 C 22.26 28.62 38.16 50.88 60.42 D
42.82 63.28 49.18 69.64 58.72 79.18 71.44 91.90 80.98 101.44
E 39.98 46.34 55.88 68.60 78.14
F 33.58 39.94 49.48 62.20 71.74
B5
BPCB mounting pattern
qPin Header Right Angle Type
Number of Contacts 16 20 26 34 40
A 22.26 28.62 38.16 50.88 60.42
B 33.58 39.94 49.48 62.20 71.74
qPin Header Straight Through hole Type or Pin Header Wrapping Type
Number of Contacts 16 20 26 34 40
A 22.26 28.62 38.16 50.88 60.42
B 39.98 46.34 55.88 68.60 78.14
qType Shape
DS type
DSA type
W type
B6
BHIF4 Basic Connection Method
Fig.1
As shown below in Figure 1, contact positions are indicated by marks (Kqxx). The connected contact is indicated with a symbol next to the individual type name. However, the contact symbol connected to the cable mark is indicated at the mark *.
Type AO
Type AB
Type A side Type B side * K mark and K mark K mark and q mark
M
Type BO
Type AD
A side D side * K mark and K mark K mark and q mark
M
s
Type CO
Type CD
C side D side * K mark and K mark K mark and q mark
M
Type DO
s
s
B7
Contact positions are designated with marks as shown below. According to the illustration on the left, the illustration 1 indicates these positions on the right.
Note 1: Cable length tolerance 500 +10, 0 max. (mm) 500 +3%, 0% min. Note 2.When a twist cable or a slit (like a roller screen) cable is used, the cable pitch will change according to cable manufacturers. If connection failure has occurred, consult HRS Sales Department.
Type AC
A side C side * K mark and K mark K mark and K mark
M M
Type CC
C side C side * K mark and K mark K mark and K mark
M M
Type AA
A side A side * K mark and K mark K mark and K mark
M M
B8
很抱歉,暂时无法提供与“HIF4-20P-3.18DSA”相匹配的价格&库存,您可以联系我们找货
免费人工找货