HR31-5.08RA-5PDL

Interface Connectors for Factory Automation Network HR31 Series Complies with Device Net requirements Comparison of plug heights (actual size) qHirose HR31 10.2 qOther manufacturer’s product s Features 1. Device-Net Compliant Conforms to requirements of Factory Automation Network Device-Net standards. Hirose products are distinct from products of made others, as described below. Feature Reduced number of termination operations High density mounting Prevention of connection errors Number of required operations to secure receptacle assembly to the board Made by others Crimped to commercially available cap connectors, inserted into housing and fastened by screw. Plug height : 15 mm Contact positions not identified. Connectors are attached by screws from the opposite side. Hirose HR31 Crimped and connected to terminal then fastened simply by inserting into housing. Plug height is 10.2 mm, allowing use of less space when mounting several connectors Permanently identified contact positions No need for screws, built-in locking pin secures connector to the board 2 Locking features The connectors can be supplied with either of the following locking features: -Screw lock, using attached screws. -Snap lock, using built-in feature with a definite click-sensation. Total space occupied by mated assemblies 3. Commercially available tools may be used Use crimp tools conforming to JIS C 9711 standards. Terminated contacts can be removed using 1 mm dia. steel pin. and re-inserted. With screw lock 12 20 Without screw lock 12 20 34 35.5 27.4 27 34 4. Prevention of deformation of the contacts When fully inserted, the plug contacts are fully protected by the walls of the insulator body eliminating a risk of accidental damage. 5 5 15 12 10.2 s Applications Power units and communications units of factory automation related devices 10.2 12 27 2004.7 1 s Product Specifications Rating Item 1.Contact resistance 2.Insulation resistance 3.Withstanding voltage 4.Impulse withstanding voltage 5.Vibration 6.Durability (insertion/ withdrawal) 7.Temperature cycle 5 m ohms max. 1000 M ohms min. No flashover or insulation breakdown No flashover or insulation breakdown No electrical discontinuity of 10 µs or more Contact resistance: 10 m ohms max. Current rating Voltage rating 12A (2.5mm2 wire) 10A (1.5mm2 wire) 250V AC, 350V DC Operating temperature range Storage temperature range -40ç to +100ç -40ç to +85ç (Note 2) Specification 1A DC 500 V DC 2000V AC/one minute Conditions Standard waveform of 4KV, positive/negative, 3 times each Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 5 min. in each of the 3 directions, 10 cycles each 100 cycles (1000 cycles for gold plated contacts) Temperature: -40ç / Room temperature to +100ç / Room temperature Time: 30 / 10 to 15 / 30 / 10 to 15 (Minutes) 5 cycles Insulation resistance: 1000 M ohms min. 8.Humidity Insulation resistance: 10 M ohms min. (Humidity state) 100 M ohms min. (Dry state) 96 hours at temperature of 40ç and humidity of 90% to 95% s Materials Part Plug Insulator Screw Crimp contact Socket contact Insulator Male contact Receptacle Nut Board retention pin Steel Phosphor bronze PBT Steel Contact area: phosphor bronze Termination area: copper PBT Brass Material Nickel plating Finish Color: Black or Green UL94V-0 Remarks Contact area: tin plating Termination area: tin plating Color: Black or Green Contact area: tin plating Termination are: tin plating Nickel plating Tin plating Available with gold plating on contact area UL94V-0 Available with gold plating on contact area s Ordering information qConnector HR31 - 5.08 P A - 5 S C (01) 1 1 Series name 2 Contact pitch 3 Connector type 4 Screw lock type 5 No. of contacts 2 3 4 5 6 7 8 HR31 5.08mm P: Plug R: Receptacle Blank: With screw A: Without screw 5 6 Contact type S: Female contact P: Male contact 7 Terminal type C: Crimping DL: Right angle through hole type D: Straight through hole type 8 Color, plating, board retention pin type qCrimp contact HR31 - SC - 1 1 3 (01) 9 9 10 11 12 10 11 12 13 14 13 Plating type 3: Tin plating 1: Gold plating 14 Suffix Series name HR31 Contact type SC: female contact Contact packaging type 1: loose contact Conductor cross area 1: 1.04 to 2.63mm2 2: 0.25 to 1.65mm2 2 s Plug (with screw lock) 27 25.4 35.5 HR31-5.08P-5SC Part No. HR31-5.08P-5SC(71) HR31-5.08P-5SC(72) CL No. 131-0002-2-71 131-0002-2-72 10.2 8.3 28.3 Plug (without screw lock) 25.4 8.3 HR31-5.08PA-5SC Part No. HR31-5.08PA-5SC HR31-5.08PA-5SC(01) CL No. 131-0009-1 131-0009-1-01 10.2 28.3 s Crimp contact 23 2.35 B Part No. HR31-SC-113(71) HR31-SC-123(72) HR31-SC-111(71) HR31-SC-121(72) CL No. 131-0006-3-71 131-0007-6-72 131-0004-8-71 131-0005-0-72 ØA 4 3.3 4 3.3 Weight ØA Note 1: Bag packaging (100 pieces/bag) Note 2: For a multi-strand conductors 12345 Weight 8g Color Black Green 27 B 1g Gold 1 2 3 4 5 Weight 6g Color Black Green B-B Contact plating Tin Applicable conductor cross area (Note 2) 1.04 to 2.63mm2 0.2 to 1.65mm2 1.04 to 2.63mm2 0.2 to 1.65mm2 3 s Receptacle (Right angle through hole type with screw lock) Contact plating 35.5 8.6 1 2 3 4 5 12 7.5 10 HR31-5.08R-5PDL Part No. HR31-5.08R-5PDL(71) HR31-5.08R-5PDL(72) HR31-5.08R-5PDL(73) HR31-5.08R-5PDL(74) HR31-5.08R-5PDL(75) HR31-5.08R-5PDL(76) CL No. 131-0001-0-71 131-0001-0-72 131-0001-0-73 131-0001-0-74 131-0001-0-75 131-0001-0-76 4g Black Weight Color Contact plating Tin Gold Tin Board retention pin With 3.3 3 Without With Without Green Gold Receptacle (Right angle through hole type without screw lock) Contact plating 27.4 1 2 3 4 5 12 8.6 3 HR31-5.08RA-5PDL Part No. HR31-5.08RA-5PDL(71) HR31-5.08RA-5PDL(72) HR31-5.08RA-5PDL(73) HR31-5.08RA-5PDL(74) HR31-5.08RA-5PDL(75) HR31-5.08RA-5PDL(76) CL No. 131-0008-9-71 131-0008-9-72 131-0008-9-73 131-0008-9-74 131-0008-9-75 131-0008-9-76 3.3 10 10.25 Weight Color Contact plating Tin Board retention pin With Black 2g Gold Tin Without With Without Green Gold BPCB mounting pattern q With screw lock 7.5±0.05 +0.1 0 q Without screw lock (Th roug h ho le) te) h (No .3 +00.1 (T 2 2-Ø 1.6 5-Ø hh roug ole) (N ) ote .3 Ø2 2.1 +0 0 (T u hro gh 6 ho le) ugh hol e) 10 ±0.05 10.25±0.05 Ø1. 5- .1 +0 0 ro (Th 5.08±0.05 10.16±0.05 15.24±0.05 15.24±0.05 5.08±0.05 10.16±0.05 Connector mounting side 5.08±0.05 10.16±0.05 12.6±0.05 12.6±0.05 10±0.05 5.08±0.05 10.16±0.05 Connector mounting side (Board thickness =1.6) (Board thickness =1.6) Note: Dia. 2.3 through hole is not required on the board when using connectors without the retention pin. 4 s Receptacle (Straight through hole type with screw lock) 35.5 1 2 3 4 5 8.6 Connector mounting side B 12 3 4.3 HR31-5.08R-5PD Part No. HR31-5.08R-5PD(71) HR31-5.08R-5PD(72) HR31-5.08R-5PD(73) HR31-5.08R-5PD(74) HR31-5.08R-5PD(75) HR31-5.08R-5PD(76) CL No. 131-0003-5-71 131-0003-5-72 131-0003-5-73 131-0003-5-74 131-0003-5-75 131-0003-5-76 4g Black Weight Color Contact plating Tin Gold Tin Board retention pin With 3.8 Without With Without Green Gold Receptacle (Straight through hole type without screw lock) 27.4 8.6 1 2 3 4 5 3 HR31-5.08RA-5PD Part No. HR31-5.08RA-5PD(71) HR31-5.08RA-5PD(72) HR31-5.08RA-5PD(73) HR31-5.08RA-5PD(74) HR31-5.08RA-5PD(75) HR31-5.08RA-5PD(76) CL No. 131-0016-7-71 131-0016-7-72 131-0016-7-73 131-0016-7-74 131-0016-7-75 131-0016-7-76 2g Connector mounting side B 12 4.3 Weight Color Contact plating Tin Board retention pin With Black Gold Tin Without With Without Green Gold BPCB mounting pattern q With screw lock 3.8±0.05 6 Ø1. .1 +0 0 q Without screw lock (Th rou gh ho le) h oug hole ) 3.8±0.05 5±0.05 5- hr te) (No 3+00.1 (T 2. -Ø 2 (N ) .1 ote .3+00 Ø2 2- (Th g rou hh ole .1 +00 ) (T u hro gh ho le) Ø1 5- .6 5.08±0.05 10.16±0.05 15.24±0.05 15.24±0.05 5.08±0.05 10.16±0.05 5.08±0.05 10.16±0.05 12.6±0.05 12.6±0.05 5.08±0.05 10.16±0.05 Connector mounting side B Connector mounting side B (Board thickness =1.6) (Board thickness =1.6) Note: Dia. 2.3 through hole is not required on the board when using connectors without the retention pin. 5 s Tools Type Manual crimp tool Contact removal pin Part No. HR31-TC-01 HR31-SC-TP CL No. 150-0217-7 150-0215-1 Manual crimp tool Contact removal pin q Tools application procedures 1. Manual contact crimp tool The tool will terminate all specified crimp contacts. Placement of correct contact in corresponding crimp position on the tool is critical. The positions are clearly indicated on the tool as (2) and (1.25). The exposed conductor strip length is 5mm. Crimp position indicator 2 1.25 Applicable crimp contact HR31-SC-113 or HR31-SC-111 HR31-SC-123 or HR31-SC-121 Crimp position indicator 1.25 2. Contact removal pin Contact removal pin provides easy method of contact removal from plug assembly. 1) Fully insert the long end of the contact removal pin into the opening in the insulator. 2) Move the pin forward, in the direction of the mating face. This will cause the terminated contact to move in opposite direction. 3) Pull out the wire with the attached crimped contact. 2 Molded-in lance Wire Molded-in lance Wire Pull-out Insertion direction Contact removal pin Contact removal pin 6 B Usage Precautions 1. To prevent damage, align receptacle with the panel and board in such a way that it is not subject to excess loads. 1.1 Recommended mounting panel dimensions (right angle through hole type) Panel 5 min. 3.2 0 +0.2 A 16.6 ±0.1 20 +0.2 Part No. HR31-5.08R-5PDL HR31-5.08RA-5PDL A 36 +0.2 +0 27.9 +0.2 +0 7.8 +0.2 0 11 0 +0.2 Board 1.2 Recommended mounting panel dimensions (straight through hole type) Panel 5 min. 3.2 B 16.6 ±0.1 2 +0.2 0 Part No. HR31-5.08R-5PD HR31-5.08RA-5PD B 36 +0.2 +0 27.9 +0.2 +0 7.8 2. Insert the crimp contact into the plug in the direction shown below. 0.2+0.2 0 11+0.2 0 +0.2 0 Crimp contact Wire 3. Use a number 0 cross drive bit to tighten the screw lock’s screw. 4. Assure that the circuit’s power is off when mating and un-mating connectors. 7 NOTES : USA: HIROSE ELECTRIC U.S.A., INC. 2688 Westhills Court, Simi Valley, CA 93065-6235 Phone : 1 805 522 7958 Fax : 1 805 522 3217 http://www.hiroseusa.com GERMANY: HIROSE ELECTRIC GmbH Zeppelinstrasse 42 D-73760 Ostfildern Kemnat Phone : 49 711 4560021 Fax : 49 711 4560729 http://www.hirose.de THE NETHERLANDS: HIROSE ELECTRIC EUROPE B.V. Beechavenue 46.1119PV Schiphol-Rijk Phone : 31 20 6557460 Fax : 31 20 6557469 http://www.hiroseeurope.com CHINA: HIROSE ELECTRIC TRADING(SHANGHAI) CO., LTD. 3705,Bund Center,222 Yan An Road(E),Shanghai 20002 Phone : 86 21 6335 2538 Fax : 86 21 6335 0767 UNITED KINGDOM: KOREA: HIROSE ELECTRIC UK LTD. HIROSE KOREA CO., LTD. Crownhill Business Centre 22 Vincent Avenue (#2NA311,Shihwa Industrial Complex), Crownhill, Milton Keynes MK8 OAB 1261-10, Jeoungwhang-Dong, Shihung-City, Kyunggi-Do Phone : 44 1908 305400 Phone : 82 31 496 7000,7124 Fax : 44 1908 305401 Fax : 82 31 496 7100 http://www.hirose.co.uk http://www.hirose.co.kr HONG KONG: HIROSE ELECTRIC CO., LTD. Unit 506, Energy Plaza. 92 Granville Road, Tsim Sha Tsui East, Kowloon Phone : 852 2803 5338 Fax : 852 2591 6560 TAIWAN: HIROSE ELECTRIC TAIWAN CO., LTD. No.28 Lane 247 Sec. 2 Yen Ping N,Rd.Taipei Phone : 886 2 2557 7351,7352 Fax : 886 2 2552 9851 SINGAPORE: HIROSE ELECTRIC CO., LTD. 10 Anson Road #34-13 International Plaza 079903 Phone : 65 6324 6113 Fax : 65 6324 6123 ® 5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-8587,JAPAN PHONE: 81-3-3491-9741, FAX: 81-3-3493-2933 http://www.hirose.com http://www.hirose-connectors.com 8 The contents of this catalog are current as of date of publication. Contents are subject to change without notice for the purpose of improvements.