HRM-603

Non-reflective Terminations (SMA Type) HRM-TM Series sFeatures HRM-TMP-2 1.High Performance These super wide bandwidth/ultra high matching non-reflective termination use Hirose Electric original high frequency matching technology. 2.Equipped with SMA Connectors HRM-TMP-05 HRM-TMP-5-2 HRM-TMP-10-2 HRM-601D U se of SMA connectors (Hirose Electric HRM Series) which feature stainless steel for the exterior cladding make these couplers durable. HRM-602 HRM-601• HRM-601A(02) HRM-603 sProduct Specifications Ratings Frequency range (Note) Characteristic impedance Maximum Input Power (Note) DC to 26.5 GHz 50 ohms 0.25 to 10 W Operating temperature range Operating relative humidity -10ç to +65ç 95% Max. Note: The frequency range and the maximum input power will differ depending on the products. Item 1.Vibration Standard Conditions Frequency of 10 to 2000 Hz, overall amplitude of 1.52 mm, acceleration of 98 m/s2 for 2 hours in each of 3 directions Acceleration of 490 m/s2, sine half-wave waveform, 3 cycles in each of the 3 axis Temperature: -55ç ¡ +5ç to +35ç ¡ +85ç ¡ +5ç to +35ç Time: 30 ¡ 15 max. ¡ 30 ¡ 15 max. (Minutes) 200 cycles No electrical discontinuity of 1 µs or more No damage, cracks, or parts dislocation 2.Shock 3.Temperature cycle No damage, cracks, or parts dislocation qThe test method conforms to MIL-STD-202. qPlease see the specification items for details concerning the VSWR. sMaterials Part Connector Body (Note) Insulation Male contacts Female contacts Outer conductor Coupling (Note) Radiator Resistor Material Stainless steel PTFE Brass Beryllium copper Brass Stainless steel Aluminum Metal film Finish Nickel plating ---------- Gold plating Gold plating Nickel plating Passivated Black alumite ---------- Note: The external cladding and coupling of HRM-601, HRM-602, and HRM-603 have received gold plating processing. 58 sOrdering Information HRM - 601 S 1 1 Series Name: HRM Series 2 600 to 699: Indicates a non-reflective termination. 3 Coupling Finish Blank: Gold plating S: Passivated A: Passivated (HRM-601S type without cap) D: Passivated (With connection leads) HRM - TM P - 5 - 2 1 2 3 4 4 Power (Example) 05: 0.5 W 2: 2 W 2 3 5 1 Series Name: HRM Series 2 TM: Indicates a non-reflective terminator. 3 Connector type P: Plug type J: Jack type 5 Suffix sSpecifications Part Number Frequency Range (GHz) DC~18 DC~18 DC~26.5 DC~18 DC~18 V.S.W.R.(Max) DC~2GHz 2~4GHz 4~8GHz 8~12.4GHz 12.4~18GHz 18~26.5GHz Power (W) Connectors Weight (g) HRM-601 HRM-601S HRM-601A HRM-601A(02) HRM-601D HRM-602 HRM-602S HRM-603 HRM-603S HRM-TMP-05 HRM-TMP-2 HRM-TMP-3 ! ∆ ! ∆ 1.08 1.08 1.08 1.08 1.08 1.10 1.10 1.10 1.10 1.15 1.12 1.12 1.12 1.12 1.15 1.15 1.15 1.15 1.35 ------------------1.20 ------------------- 1/4 1/4 1/4 1/4 1/4 HRM-P HRM-P HRM-P HRM-P HRM-J 3 3 3 3 4 DC~18 DC~18 DC~18 DC~8 DC~18 DC~8 DC~18 1.10 1.10 1.10 1.08 1.08 1.15 1.15 1.20 1.15 1.20 1.10 1.10 1.20 1.20 1.12 1.12 1.25 ---------- 1.15 1.15 1.25 ---------1.30 ---------------------------------------------------------------- 1/4 1/2 2 3 5 6 10 HRM-P HRM-P HRM-P HRM-P HRM-P HRM-P HRM-P 5 3 11 40 42 56 82 HRM-TMP-5-2 HRM-TMP-6 HRM-TMP-10-2 1.20 ---------- ---------1.30 Note 1: When 300 metal plates are attached Note 2: When connection leads are to be attached to the jack connector side, please use a leading dimension of 6.6 mm or greater from the mounting surface. ! ∆CAUTION: Beryllia is used in this product. Please follow associated laws when disposing. sTypical Data 59 sExternal Dimensions (NOTE: Mounting screw hole) (NOTE: Mounting screw hole) 60