2SK2684S

2SK2684(L), 2SK2684(S) Silicon N Channel DV–L MOS FET High Speed Power Switching ADE-208-542 1st. Edition Features • Low on-resistance R DS(on) = 20 mΩ typ. (VGS = 10V, ID = 15 A) • 4V gate drive devices. • High speed switching Outline LDPAK 4 4 D 1 1 2 3 G 2 3 1. Gate 2. Drain 3. Source 4. Drain S 2SK2684(L), 2SK2684(S) Absolute Maximum Ratings (Ta = 25°C) Item Drain to source voltage Gate to source voltage Drain current Drain peak current Body to drain diode reverse drain current Channel dissipation Channel temperature Storage temperature Notes: 1. PW ≤ 10 µs, duty cycle ≤ 1 % 2. Value at Tc = 25°C Symbol VDSS VGSS ID I D(pulse)* I DR Pch* Tch Tstg 2 1 Ratings 30 ±20 30 120 30 50 150 –55 to +150 Unit V V A A A W °C °C 2 2SK2684(L), 2SK2684(S) Electrical Characteristics (Ta = 25°C) Item Drain to source breakdown voltage Gate to source breakdown voltage Zero gate voltege drain current Gate to source leak current Symbol V(BR)DSS V(BR)GSS I DSS I GSS Min 30 ±20 — — 1.0 — — 12 — — — — — — — — — Typ — — — — — 20 35 18 750 520 210 16 260 85 90 1.0 45 Max — — 10 ±10 2.0 28 50 — — — — — — — — — — Unit V V µA µA V mΩ mΩ S pF pF pF ns ns ns ns V ns I F = 30A, VGS = 0 I F = 30A, VGS = 0 diF/ dt = 50A/µs Test Conditions I D = 10mA, VGS = 0 I G = ±100µA, VDS = 0 VDS = 30 V, VGS = 0 VGS = ±16V, VDS = 0 I D = 1mA, VDS = 10V I D = 15A, VGS = 10V*1 I D = 15A, VGS = 4V*1 I D = 15A, VDS = 10V*1 VDS = 10V VGS = 0 f = 1MHz VGS = 10V, ID = 15A RL = 0.67Ω Gate to source cutoff voltage VGS(off) Static drain to source on state RDS(on) resistance Forward transfer admittance Input capacitance Output capacitance RDS(on) |yfs| Ciss Coss Reverse transfer capacitance Crss Turn-on delay time Rise time Turn-off delay time Fall time Body to drain diode forward voltage Body to drain diode reverse recovery time Note: 1. Pulse test t d(on) tr t d(off) tf VDF t rr 3 2SK2684(L), 2SK2684(S) Main Characteristics Power vs. Temperature Derating 100 Pch (W) I D (A) Maximum Safe Operation Area 500 200 100 50 20 10 5 2 10 µs 10 1 m s 75 0 Channel Dissipation µs ) ) ot 25°C sh (1 c = T s m on ( ti 10 = pera PW C O D 50 Drain Current 25 0 50 100 150 Tc (°C) 200 Case Temperature 1 Ta = 25 °C 0.5 3 30 0.1 0.3 1 10 100 Drain to Source Voltage V DS (V) Operation in this area is limited by R DS(on) Typical Output Characteristics 50 10 V 6V 5V Pulse Test (A) 4.5 V 40 50 Typical Transfer Characteristics 25°C –25°C Tc = 75°C 30 I D (A) 40 30 4V 3.5 V VGS = 3 V Drain Current 20 Drain Current ID 20 10 10 V DS = 10 V Pulse Test 0 2 4 6 Drain to Source Voltage 8 10 V DS (V) 0 2 4 6 Gate to Source Voltage 8 10 V GS (V) 4 2SK2684(L), 2SK2684(S) Drain to Source Saturation Voltage vs. Gate to Source Voltage Drain to Source Saturation Voltage V DS(on) (V) Pulse Test Drain to Source On State Resistance R DS(on) (mΩ ) 1.0 Static Drain to Source on State Resistance vs. Drain Current 500 Pulse Test 200 100 50 VGS = 4 V 0.8 0.6 I D = 20 A 10 A 5A 0 12 4 8 Gate to Source Voltage 16 20 V GS (V) 0.4 20 10 5 1 2 0.2 10 V 10 20 50 5 Drain Current I D (A) 100 Static Drain to Source on State Resistance R DS(on) (m Ω) Forward Transfer Admittance |y fs | (S) Static Drain to Source on State Resistance vs. Temperature 100 Pulse Test 80 I D = 20 A V GS = 4 V 5, 10 A Forward Transfer Admittance vs. Drain Current 100 30 10 75 °C 3 1 0.3 0.1 0.1 Tc = –25 °C 25 °C 60 40 20 10 V 0 –40 5, 10, 20 A V DS = 10 V Pulse Test 0.3 1 3 10 30 Drain Current I D (A) 100 0 40 80 120 160 Case Temperature Tc (°C) 5 2SK2684(L), 2SK2684(S) Body to Drain Diode Reverse Recovery Time 1000 Reverse Recovery Time trr (ns) 300 100 30 10 3 1 0.1 di / dt = 50 A / µs V GS = 0, Ta = 25 °C 0.3 1 3 10 30 100 Reverse Drain Current I DR (A) 10000 5000 Typical Capacitance vs. Drain to Source Voltage VGS = 0 f = 1 MHz Capacitance C (pF) 2000 1000 Ciss 500 Coss 200 100 Crss 0 10 20 30 40 50 Drain to Source Voltage V DS (V) Dynamic Input Characteristics V DS (V) I D = 30 A VDD = 5 V 10 V 25 V V GS 20 8 V GS (V) 50 20 1000 300 100 30 10 3 1 0.1 Switching Characteristics Switching Time t (ns) 40 16 tf tr t d(on) t d(off) Drain to Source Voltage 30 V DS 12 10 V DD = 25 V 10 V 5V 8 16 24 32 Gate Charge Qg (nc) 4 0 40 Gate to Source Voltage V GS = 10 V, V DD = 10 V PW = 5 µs, duty < 1 % 0.3 1 3 Drain Current 10 30 I D (A) 100 0 6 2SK2684(L), 2SK2684(S) Reverse Drain Current vs. Source to Drain Voltage 50 Reverse Drain Current I DR (A) 40 10 V 30 5V V GS = 0, –5 V 20 10 Pulse Test 0 0.4 0.8 1.2 1.6 2.0 Source to Drain Voltage V SD (V) Normalized Transient Thermal Impedance vs. Pulse Width 3 Normalized Transient Thermal Impedance γ s (t) Tc = 25°C 1 D=1 0.5 0.3 0.2 0.1 0.1 0.05 θ ch – c(t) = γ s (t) • θ ch – c θ ch – c = 2.5 °C/W, Tc = 25 °C PDM PW T 0.03 0.02 1 lse 0.0 t pu ho 1s D= PW T 0.01 10 µ 100 µ 1m 10 m Pulse Width 100 m PW (S) 1 10 7 2SK2684(L), 2SK2684(S) Switching Time Test Circuit Vin Monitor D.U.T. RL Vin Vin 10 V 50 Ω V DD = 10 V Vout 10% 10% 90% td(on) tr 90% td(off) tf 10% Vout Monitor Waveform 90% 8 2SK2684(L), 2SK2684(S) Package Dimensions Unit: mm 10.2 ± 0.3 (1.4) 4.44 ± 0.2 1.3 ± 0.2 8.6 ± 0.3 10.0 +0.3 –0.5 11.3 ± 0.5 10.2 ± 0.3 (1.4) 4.44 ± 0.2 1.3 ± 0.2 (1.5) (1.5) (1.5) 0.76 ± 0.1 11.0 ± 0.5 8.6 ± 0.3 10.0 +0.3 –0.5 1.2 ± 0.2 0.86 +0.2 –0.1 1.27 ± 0.2 2.59 ± 0.2 0.1 +0.2 –0.1 2.59 ± 0.2 0.4 ± 0.1 0.4 ± 0.1 2.54 ± 0.5 2.54 ± 0.5 2.54 ± 0.5 1.2 ± 0.2 0.86 +0.2 –0.1 2.54 ± 0.5 L type S type 3.0 +0.3 –0.5 1.27 ± 0.2 Hitachi Code EIAJ JEDEC LDPAK — — 9 Cautions 1. Hitachi neither warrants nor grants licenses of any rights of Hitachi’s or any third party’s patent, copyright, trademark, or other intellectual property rights for information contained in this document. Hitachi bears no responsibility for problems that may arise with third party’s rights, including intellectual property rights, in connection with use of the information contained in this document. 2. Products and product specifications may be subject to change without notice. Confirm that you have received the latest product standards or specifications before final design, purchase or use. 3. Hitachi makes every attempt to ensure that its products are of high quality and reliability. However, contact Hitachi’s sales office before using the product in an application that demands especially high quality and reliability or where its failure or malfunction may directly threaten human life or cause risk of bodily injury, such as aerospace, aeronautics, nuclear power, combustion control, transportation, traffic, safety equipment or medical equipment for life support. 4. Design your application so that the product is used within the ranges guaranteed by Hitachi particularly for maximum rating, operating supply voltage range, heat radiation characteristics, installation conditions and other characteristics. Hitachi bears no responsibility for failure or damage when used beyond the guaranteed ranges. Even within the guaranteed ranges, consider normally foreseeable failure rates or failure modes in semiconductor devices and employ systemic measures such as failsafes, so that the equipment incorporating Hitachi product does not cause bodily injury, fire or other consequential damage due to operation of the Hitachi product. 5. This product is not designed to be radiation resistant. 6. No one is permitted to reproduce or duplicate, in any form, the whole or part of this document without written approval from Hitachi. 7. Contact Hitachi’s sales office for any questions regarding this document or Hitachi semiconductor products. Hitachi, Ltd. Semiconductor & Integrated Circuits. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Tel: Tokyo (03) 3270-2111 Fax: (03) 3270-5109 URL NorthAmerica : http:semiconductor.hitachi.com/ Europe : http://www.hitachi-eu.com/hel/ecg Asia (Singapore) : http://www.has.hitachi.com.sg/grp3/sicd/index.htm Asia (Taiwan) : http://www.hitachi.com.tw/E/Product/SICD_Frame.htm Asia (HongKong) : http://www.hitachi.com.hk/eng/bo/grp3/index.htm Japan : http://www.hitachi.co.jp/Sicd/indx.htm For further information write to: Hitachi Semiconductor (America) Inc. 179 East Tasman Drive, San Jose,CA 95134 Tel: (408) 433-1990 Fax: (408) 433-0223 Hitachi Europe GmbH Electronic components Group Dornacher Stra§e 3 D-85622 Feldkirchen, Munich Germany Tel: (89) 9 9180-0 Fax: (89) 9 29 30 00 Hitachi Europe Ltd. Electronic Components Group. Whitebrook Park Lower Cookham Road Maidenhead Berkshire SL6 8YA, United Kingdom Tel: (1628) 585000 Fax: (1628) 778322 Hitachi Asia Pte. Ltd. 16 Collyer Quay #20-00 Hitachi Tower Singapore 049318 Tel: 535-2100 Fax: 535-1533 Hitachi Asia Ltd. Taipei Branch Office 3F, Hung Kuo Building. No.167, Tun-Hwa North Road, Taipei (105) Tel: (2) 2718-3666 Fax: (2) 2718-8180 Hitachi Asia (Hong Kong) Ltd. Group III (Electronic Components) 7/F., North Tower, World Finance Centre, Harbour City, Canton Road, Tsim Sha Tsui, Kowloon, Hong Kong Tel: (2) 735 9218 Fax: (2) 730 0281 Telex: 40815 HITEC HX Copyright ' Hitachi, Ltd., 1999. All rights reserved. Printed in Japan.