HIRP200

H HiTRON 2008/09/26 UNIVERSAL INPUT HARMONIC CORRECTION RESONANT AC-DC OPEN FRAME TRIPLE OUTPUT 200 WATTS INTERNAL SWITCHING POWER SUPPLIES HIRP200 SERIES FEATURES: ACCOMMODATE UNIVERSAL AC SOURCES 5” x 3” COMPACT SIZE IN 1U HEIGHT 5V STAND-BY & 12V FAN OUTPUTS RESONANT DESIGN CIRCUIT MEET UNIVERSAL SAFETY STANDARDS EMI MEET CISPR PUB. 22 & FCC CLASS A CE MARKING COMPLIANCE POWER DENSITY AS HIGH AS 9.95W/C.I. SPECIFICATION INPUT SPECIFICATION Input Voltage: Typ. 90-264Vac with PFC. Input Connector: V-M connector. Input Frequency: 47-63Hz. Inrush Current: Typ. 11.4-11.7Arms@230Vac. Input Current: 1.95-2.16A @115Vac, 1.0-1.15A @230Vac. Dielectric Withstand: Meet IEC 60950-1. EMI: Meet CISPR PUB. 22 & FCC Class A. Hold-up Time: Typ. 16-18mS @115Vac & 230Vac. Power Fail Signal: Installed. Remote ON/OFF: Installed. Power Factor & Harmonic Correction: Meet IEC 61000-3-2, PF typ.0.95@ full load. Leakage Current: Less than 0.75-0.79mA. OUTPUT SPECIFICATION Output Voltage: See Ratings Chart. Output Current: See Ratings Chart. Output Connector: V-H connectors. Output Wattage: Max. 200W. Line Regulation: Typ. ±0.1%. Load Regulation: VO1 & VO3 typ. ± 1%. VO2 typ. ± 3.0%. Noise & Ripple: Typ. 1.0% peak to peak. OVP: Installed in VO1 & VO2 (Latch). Adjustability: Available at VO1. DC OK Signal: Installed. Overload Protection (OLP): Fully protected against output overload and short circuit. Typical 115-130% at 115Vac.Consult the factory for the special OLP setting. GENERAL SPECIFICATION Efficiency: Typ. 87-92%. Switching Frequency: 100-105K Hz. Circuit Topology: ZVS circuit. Transient Response: +12V and +24V voltage returns within 1mS following a 25% load change. +48V voltage returns within 1.75mS following a 25% load change. Safety Standard: UL 60950-1/EN 60950-1 Class I. Operating Temperature: 0 to +50°C at full load with specified air flow. Storage Temperature: 0 to +85°C. Temperature Coefficient: 0.05%/°C. Cooling: 400LFM airflow is required to deliver the full power. 200W. Construction: PCB format. Power Density: 9.95 Watts / Cubic Inch. Note: (1)Due to requests in market and advances in technology, specifications subject to change without notification. (2)All measurement are at nominal input, full load and +26°C unless otherwise specifications. OUTPUT VOLTAGE / CURRENT RATINGS CHART TRIPLE OUTPUT(Under forced air cooling 400LFM) MAIN VO1 @★ MODEL NO. Max. HIRP200-T120IE HIRP200-T240IE HIRP200-T480IE 16.70A 8.30A 4.16A Typ 16.6A 8.3A 4.0A Volt. +12V +24V +48V Max. 1.0A 1.0A 1.0A Typ. 0.5A 0.5A 0.5A Volt. +12.0V +12.0V +12.0V Max. 0.1A 0.1A 0.1A Typ. 0.1A 0.1A 0.1A VO2 ★(Fan outputs) 2008/09/26 VO3 ★ (Standby) Volt. +5V +5V +5V Symbol: “★” OVP built-in. “@” Adjustable. MECHANICAL DIMENSIONS: MM [INCHES] WEIGHT: 500.0g (17.6 Oz) INPUT & OUTPUT CONNECTORS PIN ASSIGNMENT AC INPUT ASSIGNMENT CNTR & PIN# AC-LINE P1-2 AC-NEUTRAL AC-GROUND P1-1 G +VO1 P2-2 DC-COM P2-1 +VO2 P3-5,6 TRIPLE OUTPUT +5VSB P3-3 DC-COM P3-4 POWER FAIL P3-1 REMOTE CONTROL P3-2 Remark: Short P3-2 and P3-3 to enable the PSU.